Re: [PATCH v5 5/9] dt-bindings: fsi: Document the FSI controller common properties

[Krzysztof Kozlowski <krzk@kernel.org>]

On 14/05/2024 21:54, Eddie James wrote:
> Since there are multiple FSI controllers documented, the common
> properties should be documented separately and then referenced
> from the specific controller documentation.
> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
> Changes since v4:
>  - Add interrupt controller properties
>  - Add clock-frequency property to FSI controller and CFAM
>  - Add detail to chip-id property description
> 
>  .../bindings/fsi/fsi-controller.yaml          | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
> new file mode 100644
> index 0000000000000..8620e4da6de77
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: FSI Controller Common Properties
> +
> +maintainers:
> +  - Eddie James <eajames@linux.ibm.com>
> +
> +description:
> +  FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
> +  FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
> +  various engines such as I2C controllers, SPI controllers, etc.
> +
> +properties:
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 0
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  clock-frequency:
> +    minimum: 1
> +    maximum: 200000000

This is a deprecated property in general. Why did it appear? It does not
exist in current bindings and nothing in commit msg suggests changes in
the bindings themselves.

> +
> +  interrupt-controller: true
> +
> +  no-scan-on-init:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      The FSI controller cannot scan the bus during initialization.
> +
> +patternProperties:
> +  "cfam@[0-9a-f],[0-9a-f]":
> +    type: object
> +    properties:
> +      chip-id:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          Processor index, a global unique chip ID which is used to identify
> +          the physical location of the chip in a system specific way.
> +
> +      clock-frequency:
> +        minimum: 1
> +        maximum: 100000000

Same question.


Best regards,
Krzysztof