* [PATCH 1/3] dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards
2025-06-14 14:20 [PATCH 0/3] arm64: dts: add descriptions for solidrun i.mx8mp based boards Josua Mayer
@ 2025-06-14 14:20 ` Josua Mayer
2025-06-26 23:50 ` Rob Herring (Arm)
2025-06-14 14:20 ` [PATCH 2/3] arm64: dts: add description for solidrun imx8mp som and cubox-m Josua Mayer
2025-06-14 14:20 ` [PATCH 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants Josua Mayer
2 siblings, 1 reply; 7+ messages in thread
From: Josua Mayer @ 2025-06-14 14:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Yazan Shhady, Mikhail Anikin, Jon Nettleton, devicetree,
linux-kernel, imx, linux-arm-kernel, Josua Mayer
Add bindings for SolidRun i.MX8M Plus System on Module based boards:
- CuBox-M is a complete produc with enclosure including the SoM
- HummingBoard Mate/Pro/Pulse/Ripple are evaluation boards with common
design but different available interfaces.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index d3b5e6923e4166e35760c17c772aa0195137de93..1462023f35b7be47a5cb855fa64025d07361d550 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1189,6 +1189,17 @@ properties:
- const: polyhex,imx8mp-debix-som-a # Polyhex Debix SOM A
- const: fsl,imx8mp
+ - description: SolidRun i.MX8MP SoM based boards
+ items:
+ - enum:
+ - solidrun,imx8mp-cubox-m # SolidRun i.MX8MP SoM on CuBox-M
+ - solidrun,imx8mp-hummingboard-mate # SolidRun i.MX8MP SoM on HummingBoard Mate
+ - solidrun,imx8mp-hummingboard-pro # SolidRun i.MX8MP SoM on HummingBoard Pro
+ - solidrun,imx8mp-hummingboard-pulse # SolidRun i.MX8MP SoM on HummingBoard Pulse
+ - solidrun,imx8mp-hummingboard-ripple # SolidRun i.MX8MP SoM on HummingBoard Ripple
+ - const: solidrun,imx8mp-sr-som
+ - const: fsl,imx8mp
+
- description: Toradex Boards with SMARC iMX8M Plus Modules
items:
- const: toradex,smarc-imx8mp-dev # Toradex SMARC iMX8M Plus on Toradex SMARC Development Board
--
2.43.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 1/3] dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards
2025-06-14 14:20 ` [PATCH 1/3] dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards Josua Mayer
@ 2025-06-26 23:50 ` Rob Herring (Arm)
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring (Arm) @ 2025-06-26 23:50 UTC (permalink / raw)
To: Josua Mayer
Cc: Pengutronix Kernel Team, Fabio Estevam, Mikhail Anikin,
Jon Nettleton, Shawn Guo, linux-kernel, linux-arm-kernel,
Conor Dooley, imx, Yazan Shhady, devicetree, Sascha Hauer,
Krzysztof Kozlowski
On Sat, 14 Jun 2025 17:20:56 +0300, Josua Mayer wrote:
> Add bindings for SolidRun i.MX8M Plus System on Module based boards:
>
> - CuBox-M is a complete produc with enclosure including the SoM
> - HummingBoard Mate/Pro/Pulse/Ripple are evaluation boards with common
> design but different available interfaces.
>
> Signed-off-by: Josua Mayer <josua@solid-run.com>
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/3] arm64: dts: add description for solidrun imx8mp som and cubox-m
2025-06-14 14:20 [PATCH 0/3] arm64: dts: add descriptions for solidrun i.mx8mp based boards Josua Mayer
2025-06-14 14:20 ` [PATCH 1/3] dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards Josua Mayer
@ 2025-06-14 14:20 ` Josua Mayer
2025-06-14 14:20 ` [PATCH 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants Josua Mayer
2 siblings, 0 replies; 7+ messages in thread
From: Josua Mayer @ 2025-06-14 14:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Yazan Shhady, Mikhail Anikin, Jon Nettleton, devicetree,
linux-kernel, imx, linux-arm-kernel, Josua Mayer
Add description for the SolidRun i.MX8M Plus based System on Module, and
the CuBox-M.
The SoM features:
- 2x 1Gbps Ethernet with PHY
- eMMC
- 1/2/3/8GB DDR
- MIPI-CSI Camera Connector (not described without specific camera)
The CuBox-M is a complete product with enclosure featuring:
- 1x 1Gbps RJ45 Ethernet Port
- 2x USB-3.0 Type A
- HDMI connector
- microSD connector
- microUSB connector for console (using fdtdi chip)
- IR receiver
- RTC with backup battery
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts | 224 +++++++++
arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi | 591 +++++++++++++++++++++++
3 files changed, 816 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0b473a23d12008ff79d6467d9e1c7ab2c4d6a9a6..e98c15eb949957a193eb3a7612f3f0f2b04790af 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -194,6 +194,7 @@ imx8mp-aristainetos3-helios-lvds-dtbs += imx8mp-aristainetos3-helios.dtb imx8mp-
dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios-lvds.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-proton2s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-cubox-m.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
new file mode 100644
index 0000000000000000000000000000000000000000..13da5e0196a3fc168efdde63d86f0fe776f999fb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp-sr-som.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP CuBox-M";
+ compatible = "solidrun,imx8mp-cubox-m",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ rtc0 = &carrier_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins>;
+ linux,autosuspend-period = <125>;
+ wakeup-source;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ status {
+ label = "status";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+ };
+
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ status = "okay";
+ };
+
+ vbus: regulator-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus";
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vmmc: regulator-mmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc_pins>;
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <250>;
+ };
+};
+
+&aud2htx {
+ status = "okay";
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c3 {
+ carrier_rtc: rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ hdmi_pins: pinctrl-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+
+ ir_pins: pinctrl-ir-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x4f
+ >;
+ };
+
+ led_pins: pinctrl-led-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x0
+ >;
+ };
+
+ usdhc2_pins: pinctrl-usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ vbus_pins: pinctrl-vbus-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x100
+ >;
+ };
+
+ vmmc_pins: pinctrl-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x0
+ >;
+ };
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus>;
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc2_pins>;
+ pinctrl-1 = <&usdhc2_100mhz_pins>;
+ pinctrl-2 = <&usdhc2_200mhz_pins>;
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+ cap-power-off-card;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..a7ee0a4d4f765581dbc27d3c5dfc656b026d27e6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP SoM";
+ compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ chosen {
+ bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0xc0000000>,
+ <0x1 0x00000000 0 0xc0000000>;
+ };
+
+ usdhc1_pwrseq: usdhc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ v_1_8: regulator-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ v_3_3: regulator-3-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ snps,force_thresh_dma_mode;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ snps,map-to-dma-channel = <4>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fec_pins>, <&phy1_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_gpio_pins>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ som_eeprom: eeprom@50{
+ compatible = "st,24c01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ pmic: pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-0 = <&pmic_pins>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+ nxp,i2c-lt-enable;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-1 = <&i2c2_gpio_pins>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-1 = <&i2c3_gpio_pins>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 {
+ /* routed to basler camera connector */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-1 = <&i2c4_gpio_pins>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&iomuxc {
+ eqos_pins: pinctrl-eqos-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ >;
+ };
+
+ fec_pins: pinctrl-fec-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
+ >;
+ };
+
+ i2c1_pins: pinctrl-i2c1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
+ i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c3
+ >;
+ };
+
+ i2c2_pins: pinctrl-i2c2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ >;
+ };
+
+ i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c3
+ >;
+ };
+
+ i2c3_pins: pinctrl-i2c3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ >;
+ };
+
+ i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c3
+ >;
+ };
+
+ i2c4_pins: pinctrl-i2c4-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ >;
+ };
+
+ i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001c3
+ >;
+ };
+
+ phy0_pins: pinctrl-phy0-grp {
+ fsl,pins = <
+ /* RESET_N: weak i/o, open drain, external 1k pull-up */
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x20
+ /* INT_N: weak i/o, open drain, internal pull-up */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x160
+ >;
+ };
+
+ phy1_pins: pinctrl-phy-1-grp {
+ fsl,pins = <
+ /* RESET_N: weak i/o, open drain, external 1k pull-up */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x20
+ /* INT_N: weak i/o, open drain, internal pull-up */
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x160
+ >;
+ };
+
+ pmic_pins: pinctrl-pmic-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
+ >;
+ };
+
+ uart1_pins: pinctrl-uart1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
+ MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x140
+ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140
+ /* BT_REG_ON */
+ MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x0
+ /* BT_WAKE_DEV */
+ MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x0
+ /* BT_WAKE_HOST */
+ MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x100
+ >;
+ };
+
+ uart2_pins: pinctrl-uart2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ >;
+ };
+
+ usdhc1_pins: pinctrl-usdhc1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ /* WL_REG_ON */
+ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x0
+ /* WL_WAKE_HOST */
+ MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x100
+ >;
+ };
+
+ usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ >;
+ };
+
+ usdhc3_pins: pinctrl-usdhc3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ wdog1_pins: pinctrl-wdog1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x140
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ uart-has-rtscts;
+ /* select 80MHz parent clock to support maximum baudrate 4Mbps */
+ assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ /* Murata 1MW module supports max. 3M baud */
+ max-speed = <3000000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usdhc1_pins>;
+ pinctrl-1 = <&usdhc1_100mhz_pins>;
+ pinctrl-2 = <&usdhc1_200mhz_pins>;
+ vmmc-supply = <&v_3_3>;
+ vqmmc-supply = <&v_1_8>;
+ bus-width = <4>;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc3_pins>;
+ pinctrl-1 = <&usdhc3_100mhz_pins>;
+ pinctrl-2 = <&usdhc3_200mhz_pins>;
+ vmmc-supply = <&v_3_3>;
+ vqmmc-supply = <&v_1_8>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wdog1_pins>;
+ status = "okay";
+};
+
+/*
+ * Reserve all physical memory from within the first 1GB of DDR address
+ * space to avoid panic on low memory systems.
+ */
+&dsp_reserved {
+ reg = <0 0x6f000000 0 0x1000000>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants
2025-06-14 14:20 [PATCH 0/3] arm64: dts: add descriptions for solidrun i.mx8mp based boards Josua Mayer
2025-06-14 14:20 ` [PATCH 1/3] dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards Josua Mayer
2025-06-14 14:20 ` [PATCH 2/3] arm64: dts: add description for solidrun imx8mp som and cubox-m Josua Mayer
@ 2025-06-14 14:20 ` Josua Mayer
2025-06-16 6:20 ` Krzysztof Kozlowski
2 siblings, 1 reply; 7+ messages in thread
From: Josua Mayer @ 2025-06-14 14:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Yazan Shhady, Mikhail Anikin, Jon Nettleton, devicetree,
linux-kernel, imx, linux-arm-kernel, Josua Mayer
Add descriptions for the SolidRun i.MX8M Plus System on Module based
HummingBoard product-line. They share a common designed based on the
"Pulse" version, defined by various assembly options.
The HummingBoard Pulse features:
- 2x RJ45 Ethernet
- 2x USB-3.0 Type A
- HDMI connector
- mini-HDMI connector
- microSD connector
- mini-PCI-E connector with SIM slot supporting USB-2.0/3.0 interfaces
- M.2 connector with SIM slot supporting USB-2.0/3.0 interfaces
- MIPI-CSI Camera Connector (not described without specific camera)
- 3.5mm Analog Stereo Out / Microphone In Headphone Jack
- RTC with backup battery
The variants Mate and Ripple are reduced versions of Pulse.
The HummingBoard Pro extends Pulse with PCI-E on M.2 connector.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../dts/freescale/imx8mp-hummingboard-mate.dts | 31 ++
.../boot/dts/freescale/imx8mp-hummingboard-pro.dts | 76 ++++
.../freescale/imx8mp-hummingboard-pulse-codec.dtsi | 59 ++++
.../imx8mp-hummingboard-pulse-common.dtsi | 390 +++++++++++++++++++++
.../freescale/imx8mp-hummingboard-pulse-hdmi.dtsi | 44 +++
.../freescale/imx8mp-hummingboard-pulse-m2con.dtsi | 60 ++++
.../imx8mp-hummingboard-pulse-mini-hdmi.dtsi | 81 +++++
.../dts/freescale/imx8mp-hummingboard-pulse.dts | 72 ++++
.../dts/freescale/imx8mp-hummingboard-ripple.dts | 31 ++
10 files changed, 848 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index e98c15eb949957a193eb3a7612f3f0f2b04790af..ccc1d6f98495589cb6a55b198d1933bcf076fcb8 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -203,6 +203,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
new file mode 100644
index 0000000000000000000000000000000000000000..00614f5d58ea9de51aad9a5f36212dc3d4f3ecaf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Mate";
+ compatible = "solidrun,imx8mp-hummingboard-mate",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
new file mode 100644
index 0000000000000000000000000000000000000000..36cd452f1583987a1e826d33798d9aecaaf21568
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Pro";
+ compatible = "solidrun,imx8mp-hummingboard-pro",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+ <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+ pinctrl-0 = <&m2_reset_pins>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ status = "okay";
+};
+
+&phy0 {
+ leds {
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /delete-node/ led@1;
+ };
+};
+
+&phy1 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..fd16916676db4ec6f0e66d9c52355c37fe06b971
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ sound-wm8904 {
+ compatible = "fsl,imx-audio-wm8904";
+ model = "audio-wm8904";
+ audio-cpu = <&sai3>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "AMIC", "MICBIAS",
+ "IN2R", "AMIC";
+ };
+};
+
+&i2c2 {
+ codec: codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ clock-names = "mclk";
+ AVDD-supply = <&v_1_8>;
+ CPVDD-supply = <&v_1_8>;
+ DBVDD-supply = <&v_3_3>;
+ DCVDD-supply = <&v_1_8>;
+ MICVDD-supply = <&v_3_3>;
+ };
+};
+
+&iomuxc {
+ sai3_pins: pinctrl-sai3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
+ >;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sai3_pins>;
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+ <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+ <&clk IMX8MP_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..904c8d6fd5cdb4295da0a8d58711032a51578371
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ rtc0 = &carrier_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led-0 {
+ label = "D30";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "D31";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-2 {
+ label = "D32";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-3 {
+ label = "D33";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-4 {
+ label = "D34";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ rfkill-mpcie-wifi {
+ /*
+ * The mpcie connector only has USB,
+ * therefore this rfkill is for cellular radios only.
+ */
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpcie_rfkill_pins>;
+ label = "mpcie radio";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ vmmc: regulator-mmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc_pins>;
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <250>;
+ };
+
+ vbus1: regulator-vbus-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus1";
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus1_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vbus2: regulator-vbus-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus2";
+ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus2_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ v_1_2: regulator-1-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vmpcie {
+ /* supplies mpcie and m2 connectors */
+ compatible = "regulator-fixed";
+ regulator-name = "vmpcie";
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmpcie_pins>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+/* mikrobus spi */
+&ecspi2 {
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_spi_pins>;
+ status = "okay";
+
+ spi@0 {
+ reg = <0>;
+ compatible = "rohm,dh2228fv";
+ spi-max-frequency = <500000>;
+ };
+};
+
+&gpio1 {
+ pinctrl-0 = <&mpcie_reset_pins>;
+ pinctrl-names = "default";
+
+ mpcie-reset-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "mpcie-reset";
+ };
+};
+
+&i2c3 {
+ carrier_rtc: rtc@69 {
+ compatible = "abracon,ab1805";
+ reg = <0x69>;
+ abracon,tc-diode = "schottky";
+ abracon,tc-resistor = <3>;
+ };
+
+ carrier_eeprom: eeprom@57{
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+&iomuxc {
+ csi_pins: pinctrl-csi-grp {
+ fsl,pins = <
+ /* Pin 24: STROBE */
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0
+ >;
+ };
+
+ mikro_int_pins: pinctrl-mikro-int-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x0
+ >;
+ };
+
+ mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x0
+ >;
+ };
+
+ mikro_rst_pins: pinctrl-mikro-rst-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x0
+ >;
+ };
+
+ mikro_spi_pins: pinctrl-mikro-spi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82
+ >;
+ };
+
+ mikro_uart_pins: pinctrl-mikro-uart-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x140
+ MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x140
+ >;
+ };
+
+ led_pins: pinctrl-led-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0
+ MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x0
+ MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0
+ MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x0
+ >;
+ };
+
+ mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x0
+ >;
+ };
+
+ mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x20
+ >;
+ };
+
+ usb_hub_pins: pinctrl-usb-hub-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x0
+ >;
+ };
+
+ usdhc2_pins: pinctrl-usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ vbus1_pins: pinctrl-vbus-1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x20
+ >;
+ };
+
+ vbus2_pins: pinctrl-vbus-2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x20
+ >;
+ };
+
+ vmmc_pins: pinctrl-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+
+ vmpcie_pins: pinctrl-vmpcie-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x0
+ >;
+ };
+};
+
+&phy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /* ADIN1300 LINK_ST pin */
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus2>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <&vbus1>;
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_pins>;
+
+ hub_2_0: hub@1 {
+ compatible = "usb4b4,6502", "usb4b4,6506";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&v_1_2>;
+ vdd2-supply = <&v_3_3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb4b4,6500", "usb4b4,6504";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&v_1_2>;
+ vdd2-supply = <&v_3_3>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc2_pins>;
+ pinctrl-1 = <&usdhc2_100mhz_pins>;
+ pinctrl-2 = <&usdhc2_200mhz_pins>;
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+ cap-power-off-card;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..d7a999c0d7e06a8c47a61632a59eb97faea9e3d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ };
+};
+
+&aud2htx {
+ status = "okay";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&iomuxc {
+ hdmi_pins: pinctrl-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+};
+
+&lcdif3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..b879ca4ed21428b8d4c6866f9a827bcfbef1caee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ rfkill-m2-gnss {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m2_gnss_rfkill_pins>;
+ label = "m.2 GNSS";
+ radio-type = "gps";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* M.2 is B-keyed, so w-disable is for WWAN */
+ rfkill-m2-wwan {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m2_wwan_rfkill_pins>;
+ label = "m.2 WWAN";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x20
+ >;
+ };
+
+ m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x20
+ >;
+ };
+
+ m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x20
+ >;
+ };
+
+ m2_reset_pins: pinctrl-m2-reset-grp {
+ fsl,pins = <
+ /*
+ * 3.3V domain on SoC, set open-drain to ensure
+ * 1.8V logic on connector
+ */
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x20
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..46916ddc053355b6708629898fa13e55c6493cc2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "c";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ hdmi@3d {
+ compatible = "adi,adv7535";
+ reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+ reg-names = "main", "edid", "cec", "packet";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <&v_1_8>;
+ dvdd-supply = <&v_1_8>;
+ pvdd-supply = <&v_1_8>;
+ a2vdd-supply = <&v_1_8>;
+ v3p3-supply = <&v_3_3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mini_hdmi_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_from_dsim: endpoint {
+ remote-endpoint = <&dsim_to_adv7535>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&iomuxc {
+ mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x0
+ >;
+ };
+};
+
+&lcdif1 {
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ port@1 {
+ dsim_to_adv7535: endpoint {
+ remote-endpoint = <&adv7535_from_dsim>;
+ attach-bridge;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
new file mode 100644
index 0000000000000000000000000000000000000000..920740630e3524ffbb94d70be0f66a2653eb0394
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Pulse";
+ compatible = "solidrun,imx8mp-hummingboard-pulse",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &pcie_eth;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+ <&m2_wwan_wake_pins>, <&m2_reset_pins>;
+
+ pcie_eth_pins: pinctrl-pcie-eth-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x0
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-0 = <&pcie_eth_pins>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ root@0,0 {
+ compatible = "pci16c3,abcd";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* Intel i210 */
+ pcie_eth: ethernet@1,0 {
+ compatible = "pci8086,157b";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
new file mode 100644
index 0000000000000000000000000000000000000000..4ce5b799b6abc514ca00e2e2134d5ff1606dc87d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Ripple";
+ compatible = "solidrun,imx8mp-hummingboard-ripple",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants
2025-06-14 14:20 ` [PATCH 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants Josua Mayer
@ 2025-06-16 6:20 ` Krzysztof Kozlowski
2025-06-16 11:47 ` Josua Mayer
0 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2025-06-16 6:20 UTC (permalink / raw)
To: Josua Mayer, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Yazan Shhady, Mikhail Anikin, Jon Nettleton, devicetree,
linux-kernel, imx, linux-arm-kernel
On 14/06/2025 16:20, Josua Mayer wrote:
> +
> +/* mikrobus spi */
> +&ecspi2 {
> + num-cs = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mikro_spi_pins>;
> + status = "okay";
> +
> + spi@0 {
> + reg = <0>;
> + compatible = "rohm,dh2228fv";
NAK, such device DOES NOT EXIST. It is impossible to obtain dh2228fv, so
your engineers were able to find it from Rohm?
Drop entire node.
> + spi-max-frequency = <500000>;
> + };
> +};
> +
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants
2025-06-16 6:20 ` Krzysztof Kozlowski
@ 2025-06-16 11:47 ` Josua Mayer
0 siblings, 0 replies; 7+ messages in thread
From: Josua Mayer @ 2025-06-16 11:47 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam
Cc: Yazan Shhady, Mikhail Anikin, Jon Nettleton,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Am 16.06.25 um 09:20 schrieb Krzysztof Kozlowski:
> On 14/06/2025 16:20, Josua Mayer wrote:
>> +
>> +/* mikrobus spi */
>> +&ecspi2 {
>> + num-cs = <1>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mikro_spi_pins>;
>> + status = "okay";
>> +
>> + spi@0 {
>> + reg = <0>;
>> + compatible = "rohm,dh2228fv";
> NAK, such device DOES NOT EXIST. It is impossible to obtain dh2228fv, so
> your engineers were able to find it from Rohm?
Correct.
This description was used for hardware validation without a real dh2228fv.
>
> Drop entire node.
Will do for v2, thanks.
>
>
>> + spi-max-frequency = <500000>;
>> + };
>> +};
>> +
Did the separation of board features into various dtsi look acceptable?
^ permalink raw reply [flat|nested] 7+ messages in thread