From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Sven Peter <sven@svenpeter.dev>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowsk <krzysztof.kozlowski@canonical.com>,
Joey Gouly <joey.gouly@arm.com>, Hector Martin <marcan@marcan.st>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Mark Kettenis <kettenis@openbsd.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 3/3] nvmem: Add Apple eFuse driver
Date: Mon, 11 Apr 2022 10:41:06 +0100 [thread overview]
Message-ID: <92e94b98-847d-7d3f-4063-96d2d01eff6e@linaro.org> (raw)
In-Reply-To: <20220410135414.20606-3-sven@svenpeter.dev>
On 10/04/2022 14:54, Sven Peter wrote:
> Apple SoCs contain eFuses used to store factory-programmed data such
> as calibration values for the PCIe or the Type-C PHY. They are organized
> as 32bit values exposed as MMIO.
>
> Signed-off-by: Sven Peter <sven@svenpeter.dev>
Applied all 3,
thanks,
--srini
> ---
> v3 -> v4:
> - rebased on 5.18-rc1 and split off MAINTAINER changes as requested
> by Srinivas Kandagatla
> v2 -> v3:
> - removed .owner = THIS_MODULE again since it's already done by the
> core as pointed out by Krzysztof Kozlowski
> v1 -> v2:
> - fixed sparse warning about __iomem by introducing
> struct apple_efuses_priv as done in other nvmem drivers
> - make sure the driver actually works as a module by
> setting .owner to THIS_MODULE and adding MODULE_DEVICE_TABLE
> pointed out by Joey Gouly
>
> drivers/nvmem/Kconfig | 12 ++++++
> drivers/nvmem/Makefile | 2 +
> drivers/nvmem/apple-efuses.c | 80 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 94 insertions(+)
> create mode 100644 drivers/nvmem/apple-efuses.c
>
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 555aa77a574d..6283e09cc1e9 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
> This driver can also be built as a module. If so, the module
> will be called nvmem-sunplus-ocotp.
>
> +config NVMEM_APPLE_EFUSES
> + tristate "Apple eFuse support"
> + depends on ARCH_APPLE || COMPILE_TEST
> + default ARCH_APPLE
> + help
> + Say y here to enable support for reading eFuses on Apple SoCs
> + such as the M1. These are e.g. used to store factory programmed
> + calibration data required for the PCIe or the USB-C PHY.
> +
> + This driver can also be built as a module. If so, the module will
> + be called nvmem-apple-efuses.
> +
> endif
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 891958e29d25..00e136a0a123 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -65,3 +65,5 @@ obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o
> nvmem-layerscape-sfp-y := layerscape-sfp.o
> obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
> nvmem_sunplus_ocotp-y := sunplus-ocotp.o
> +obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
> +nvmem-apple-efuses-y := apple-efuses.o
> diff --git a/drivers/nvmem/apple-efuses.c b/drivers/nvmem/apple-efuses.c
> new file mode 100644
> index 000000000000..9b7c87102104
> --- /dev/null
> +++ b/drivers/nvmem/apple-efuses.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Apple SoC eFuse driver
> + *
> + * Copyright (C) The Asahi Linux Contributors
> + */
> +
> +#include <linux/io.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/platform_device.h>
> +
> +struct apple_efuses_priv {
> + void __iomem *fuses;
> +};
> +
> +static int apple_efuses_read(void *context, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct apple_efuses_priv *priv = context;
> + u32 *dst = val;
> +
> + while (bytes >= sizeof(u32)) {
> + *dst++ = readl_relaxed(priv->fuses + offset);
> + bytes -= sizeof(u32);
> + offset += sizeof(u32);
> + }
> +
> + return 0;
> +}
> +
> +static int apple_efuses_probe(struct platform_device *pdev)
> +{
> + struct apple_efuses_priv *priv;
> + struct resource *res;
> + struct nvmem_config config = {
> + .dev = &pdev->dev,
> + .read_only = true,
> + .reg_read = apple_efuses_read,
> + .stride = sizeof(u32),
> + .word_size = sizeof(u32),
> + .name = "apple_efuses_nvmem",
> + .id = NVMEM_DEVID_AUTO,
> + .root_only = true,
> + };
> +
> + priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->fuses = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(priv->fuses))
> + return PTR_ERR(priv->fuses);
> +
> + config.priv = priv;
> + config.size = resource_size(res);
> +
> + return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
> +}
> +
> +static const struct of_device_id apple_efuses_of_match[] = {
> + { .compatible = "apple,efuses", },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(of, apple_efuses_of_match);
> +
> +static struct platform_driver apple_efuses_driver = {
> + .driver = {
> + .name = "apple_efuses",
> + .of_match_table = apple_efuses_of_match,
> + },
> + .probe = apple_efuses_probe,
> +};
> +
> +module_platform_driver(apple_efuses_driver);
> +
> +MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
> +MODULE_LICENSE("GPL");
prev parent reply other threads:[~2022-04-11 9:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-10 13:54 [PATCH v4 1/3] MAINTAINERS: Add apple efuses nvmem files to ARM/APPLE MACHINE Sven Peter
2022-04-10 13:54 ` [PATCH v4 2/3] dt-bindings: nvmem: Add apple,efuses Sven Peter
2022-04-10 13:54 ` [PATCH v4 3/3] nvmem: Add Apple eFuse driver Sven Peter
2022-04-11 9:41 ` Srinivas Kandagatla [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=92e94b98-847d-7d3f-4063-96d2d01eff6e@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alyssa@rosenzweig.io \
--cc=devicetree@vger.kernel.org \
--cc=joey.gouly@arm.com \
--cc=kettenis@openbsd.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=robh+dt@kernel.org \
--cc=sven@svenpeter.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).