devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: Vignesh R <vigneshr@ti.com>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 2/5] mtd: spi-nor: cadence-quadspi: add a delay in write sequence
Date: Sun, 24 Sep 2017 13:59:45 +0200	[thread overview]
Message-ID: <94313cae-4805-0b13-a469-72aa7556b685@gmail.com> (raw)
In-Reply-To: <20170924105924.23923-3-vigneshr@ti.com>

On 09/24/2017 12:59 PM, Vignesh R wrote:
> As per 66AK2G02 TRM[1] SPRUHY8F section 11.15.5.3 Indirect Access
> Controller programming sequence, a delay equal to couple of QSPI master
> clock(~5ns) is required after setting CQSPI_REG_INDIRECTWR_START bit and
> writing data to the flash. Introduce a quirk flag CQSPI_NEEDS_WR_DELAY
> to handle this and set this flag for TI 66AK2G SoC.
> 
> [1]http://www.ti.com/lit/ug/spruhy8f/spruhy8f.pdf
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>

Is this TI specific or is this controller property ? I wouldn't be
surprised of the later ...

> ---
> 
> v3:
> Fix build warnings reported by kbuild test bot.
> 
>  drivers/mtd/spi-nor/cadence-quadspi.c | 27 ++++++++++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index 53c7d8e0327a..5cd5d6f7303f 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -38,6 +38,9 @@
>  #define CQSPI_NAME			"cadence-qspi"
>  #define CQSPI_MAX_CHIPSELECT		16
>  
> +/* Quirks */
> +#define CQSPI_NEEDS_WR_DELAY		BIT(0)
> +
>  struct cqspi_st;
>  
>  struct cqspi_flash_pdata {
> @@ -76,6 +79,7 @@ struct cqspi_st {
>  	u32			fifo_depth;
>  	u32			fifo_width;
>  	u32			trigger_address;
> +	u32			wr_delay;
>  	struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
>  };
>  
> @@ -608,6 +612,15 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor,
>  	reinit_completion(&cqspi->transfer_complete);
>  	writel(CQSPI_REG_INDIRECTWR_START_MASK,
>  	       reg_base + CQSPI_REG_INDIRECTWR);
> +	/*
> +	 * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access
> +	 * Controller programming sequence, couple of cycles of
> +	 * QSPI_REF_CLK delay is required for the above bit to
> +	 * be internally synchronized by the QSPI module. Provide 5
> +	 * cycles of delay.
> +	 */
> +	if (cqspi->wr_delay)
> +		ndelay(cqspi->wr_delay);
>  
>  	while (remaining > 0) {
>  		write_bytes = remaining > page_size ? page_size : remaining;
> @@ -1156,6 +1169,7 @@ static int cqspi_probe(struct platform_device *pdev)
>  	struct cqspi_st *cqspi;
>  	struct resource *res;
>  	struct resource *res_ahb;
> +	unsigned long data;
>  	int ret;
>  	int irq;
>  
> @@ -1213,6 +1227,10 @@ static int cqspi_probe(struct platform_device *pdev)
>  	}
>  
>  	cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
> +	data  = (unsigned long)of_device_get_match_data(dev);
> +	if (data & CQSPI_NEEDS_WR_DELAY)
> +		cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC,
> +						   cqspi->master_ref_clk_hz);
>  
>  	ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
>  			       pdev->name, cqspi);
> @@ -1284,7 +1302,14 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = {
>  #endif
>  
>  static const struct of_device_id cqspi_dt_ids[] = {
> -	{.compatible = "cdns,qspi-nor",},
> +	{
> +		.compatible = "cdns,qspi-nor",
> +		.data = (void *)0,
> +	},
> +	{
> +		.compatible = "ti,k2g-qspi",
> +		.data = (void *)CQSPI_NEEDS_WR_DELAY,
> +	},
>  	{ /* end of table */ }
>  };
>  
> 


-- 
Best regards,
Marek Vasut

  reply	other threads:[~2017-09-24 11:59 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-24 10:59 [PATCH v3 0/5] K2G: Add QSPI support Vignesh R
2017-09-24 10:59 ` [PATCH v3 1/5] mtd: spi-nor: cadence-quadspi: Add TI 66AK2G SoC specific compatible Vignesh R
2017-09-24 10:59 ` [PATCH v3 2/5] mtd: spi-nor: cadence-quadspi: add a delay in write sequence Vignesh R
2017-09-24 11:59   ` Marek Vasut [this message]
     [not found]     ` <94313cae-4805-0b13-a469-72aa7556b685-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-24 12:33       ` Vignesh R
     [not found]         ` <8990b971-91d5-747f-905b-5e24743e090d-l0cyMroinI0@public.gmane.org>
2017-09-24 13:13           ` Marek Vasut
     [not found]             ` <d35d0891-71b9-12df-9689-dc77f56453ab-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-10-02 12:46               ` Vignesh R
2017-09-24 10:59 ` [PATCH v3 3/5] mtd: spi-nor: cadence-quadspi: Add new binding to enable loop-back circuit Vignesh R
2017-09-24 10:59 ` [PATCH v3 4/5] mtd: spi-nor: cadence-quadspi: Add support to enable loop-back clock circuit Vignesh R
2017-09-24 10:59 ` [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Vignesh R
2017-09-24 12:01   ` Marek Vasut
2017-09-24 13:08     ` Vignesh R
     [not found]       ` <4ee69ea4-14cc-4305-bf3f-8fe76d43bf6b-l0cyMroinI0@public.gmane.org>
2017-09-24 13:12         ` Marek Vasut
     [not found]           ` <fa700cdf-f0b5-779b-4f38-3138a7612cc2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-24 13:27             ` Vignesh R
2017-09-24 13:51               ` Marek Vasut
     [not found]                 ` <e4ad5d80-9093-b667-f0a5-d3105be4e8cf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-25 22:41                   ` matthew.gerlach-VuQAYsv1563Yd54FQh9/CA
2017-09-25 23:49                     ` Marek Vasut
     [not found]                       ` <fdfe29bf-ff46-7542-8e36-e8e45e1ca85f-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-27 10:48                         ` Vignesh R
2017-09-28 15:01                           ` matthew.gerlach
2017-10-02 12:28                             ` Vignesh R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=94313cae-4805-0b13-a469-72aa7556b685@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).