On 11/30/23 07:42, Stefan Wahren wrote:
> The BCM2711 SoC also has a generic xHCI. The USB port is currently
> only usable on the Compute Module 4 (e.g. via IO board). Because
> DWC2 and xHCI share the same PHY, we let the bootloader enable it
> on demand.
> 
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>

And this gives a consistent + 4MB/sec throughput compared to dwc2, so 
this looks great!
-- 
Florian