From: Maulik Shah <mkshah@codeaurora.org>
To: Matthias Kaehlcke <mka@chromium.org>
Cc: agross@kernel.org, robh+dt@kernel.org,
bjorn.andersson@linaro.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, rnayak@codeaurora.org,
ilina@codeaurora.org, lsrao@codeaurora.org, swboyd@chromium.org,
evgreen@chromium.org, dianders@chromium.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Add cpuidle low power states
Date: Sat, 25 Jan 2020 21:09:27 +0530 [thread overview]
Message-ID: <948c046a-5e95-104c-0bc0-f3615edddeca@codeaurora.org> (raw)
In-Reply-To: <20200121234452.GW89495@google.com>
Hi Matthias,
Yes, i will post new version very soon.
Thanks,
Maulik
On 1/22/2020 5:14 AM, Matthias Kaehlcke wrote:
> Hi Maulik,
>
> what is the state of this patch? Sudeep and Stephen had comments requesting
> minor changes, do you plan to send a v2 soon?
>
> Thanks
>
> Matthias
>
> On Wed, Oct 30, 2019 at 09:35:18AM +0530, Maulik Shah wrote:
>> Add device bindings for cpuidle states for cpu devices.
>>
>> Cc: devicetree@vger.kernel.org
>> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
>> ---
>> arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 78 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index fceac50..69d5e2c 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -70,6 +70,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x0>;
>> enable-method = "psci";
>> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
>> + &LITTLE_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_0>;
>> L2_0: l2-cache {
>> compatible = "cache";
>> @@ -85,6 +88,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x100>;
>> enable-method = "psci";
>> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
>> + &LITTLE_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_100>;
>> L2_100: l2-cache {
>> compatible = "cache";
>> @@ -97,6 +103,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x200>;
>> enable-method = "psci";
>> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
>> + &LITTLE_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_200>;
>> L2_200: l2-cache {
>> compatible = "cache";
>> @@ -109,6 +118,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x300>;
>> enable-method = "psci";
>> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
>> + &LITTLE_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_300>;
>> L2_300: l2-cache {
>> compatible = "cache";
>> @@ -121,6 +133,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x400>;
>> enable-method = "psci";
>> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
>> + &LITTLE_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_400>;
>> L2_400: l2-cache {
>> compatible = "cache";
>> @@ -133,6 +148,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x500>;
>> enable-method = "psci";
>> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
>> + &LITTLE_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_500>;
>> L2_500: l2-cache {
>> compatible = "cache";
>> @@ -145,6 +163,9 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x600>;
>> enable-method = "psci";
>> + cpu-idle-states = <&BIG_CPU_SLEEP_0
>> + &BIG_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_600>;
>> L2_600: l2-cache {
>> compatible = "cache";
>> @@ -157,12 +178,69 @@
>> compatible = "arm,armv8";
>> reg = <0x0 0x700>;
>> enable-method = "psci";
>> + cpu-idle-states = <&BIG_CPU_SLEEP_0
>> + &BIG_CPU_SLEEP_1
>> + &CLUSTER_SLEEP_0>;
>> next-level-cache = <&L2_700>;
>> L2_700: l2-cache {
>> compatible = "cache";
>> next-level-cache = <&L3_0>;
>> };
>> };
>> +
>> + idle-states {
>> + entry-method = "psci";
>> +
>> + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "little-power-down";
>> + arm,psci-suspend-param = <0x40000003>;
>> + entry-latency-us = <350>;
>> + exit-latency-us = <461>;
>> + min-residency-us = <1890>;
>> + local-timer-stop;
>> + };
>> +
>> + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "little-rail-power-down";
>> + arm,psci-suspend-param = <0x40000004>;
>> + entry-latency-us = <360>;
>> + exit-latency-us = <531>;
>> + min-residency-us = <3934>;
>> + local-timer-stop;
>> + };
>> +
>> + BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "big-power-down";
>> + arm,psci-suspend-param = <0x40000003>;
>> + entry-latency-us = <264>;
>> + exit-latency-us = <621>;
>> + min-residency-us = <952>;
>> + local-timer-stop;
>> + };
>> +
>> + BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "big-rail-power-down";
>> + arm,psci-suspend-param = <0x40000004>;
>> + entry-latency-us = <702>;
>> + exit-latency-us = <1061>;
>> + min-residency-us = <4488>;
>> + local-timer-stop;
>> + };
>> +
>> + CLUSTER_SLEEP_0: cluster-sleep-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "cluster-power-down";
>> + arm,psci-suspend-param = <0x400000F4>;
>> + entry-latency-us = <3263>;
>> + exit-latency-us = <6562>;
>> + min-residency-us = <9987>;
>> + local-timer-stop;
>> + };
>> + };
>> };
>>
>> memory@80000000 {
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-01-25 15:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1572408318-28681-1-git-send-email-mkshah@codeaurora.org>
2019-10-30 4:05 ` [PATCH] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
2019-10-30 6:56 ` Sudeep Holla
2019-11-01 5:20 ` Maulik Shah
2019-11-04 21:47 ` Stephen Boyd
2020-01-21 23:44 ` Matthias Kaehlcke
2020-01-25 15:39 ` Maulik Shah [this message]
2020-02-04 5:48 ` Maulik Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=948c046a-5e95-104c-0bc0-f3615edddeca@codeaurora.org \
--to=mkshah@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lsrao@codeaurora.org \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).