Re: [PATCH v5 0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support

[Kishon Vijay Abraham I <kishon@ti.com>]

On 06/01/20 6:37 PM, Roger Quadros wrote:
> 
> 
> On 06/01/2020 15:06, Roger Quadros wrote:
>> Hi,
>>
>> On J721e platform, the 2 lanes of SERDES PHY are used to achieve
>> USB Type-C plug flip support without any additional MUX component
>> by using a lane swap feature.
>>
>> However, the driver needs to know the Type-C plug orientation before
>> it can decide whether to swap the lanes or not. This is achieved via a
>> GPIO named DIR.
>>
>> Another constraint is that the lane swap must happen only when the PHY
>> is in inactive state. This is achieved by sampling the GPIO and
>> programming the lane swap before bringing the PHY out of reset.
>>
>> This series adds support to read the GPIO and accordingly program
>> the Lane swap for Type-C plug flip support.
>>
>> Series must be applied on top of
>> https://patchwork.kernel.org/cover/11293671/
>>
>> cheers,
>> -roger
>>
>> Changelog:
> v5
>  - rebased on phy/next

merged now, thanks!

-Kishon

> 
>> v4
>> - fixes in dt-binding document
>>    - fix typo
>>    - change to typec-dir-debounce-ms and add min/max/default values
>>    - drop reference to uint32 type
>> - fixes in driver
>>    - change to updated typec-dir-debounce-ms property
>>    - add limit checks and use default value if not specified
>>
>> v3
>> - Rebase on v2 of PHY series and update DT binding to yaml
>>
>> v2
>> - revise commit log of patch 1
>> - use regmap_field in patch 3
>>
>>
>> Roger Quadros (3):
>>    phy: cadence: Sierra: add phy_reset hook
>>    dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
>>    phy: ti: j721e-wiz: Manage typec-gpio-dir
>>
>>   .../bindings/phy/ti,phy-j721e-wiz.yaml        | 17 ++++++
>>   drivers/phy/cadence/phy-cadence-sierra.c      | 10 +++
>>   drivers/phy/ti/phy-j721e-wiz.c                | 61 +++++++++++++++++++
>>   3 files changed, 88 insertions(+)
>>
>