* [PATCH v3 1/2][next] dt-bindings: power: supply: Revise Richtek RT9467 compatible name
2023-02-17 8:06 [PATCH v3 0/2][next] Revise Richtek RT9467 documentation compatible name ChiaEn Wu
@ 2023-02-17 8:06 ` ChiaEn Wu
2023-02-17 8:53 ` Krzysztof Kozlowski
2023-02-17 8:06 ` [PATCH v3 2/2][next] dt-bindings: power: supply: Rename the file name of RT9467 charger yaml ChiaEn Wu
1 sibling, 1 reply; 5+ messages in thread
From: ChiaEn Wu @ 2023-02-17 8:06 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, sre
Cc: cy_huang, devicetree, linux-kernel, linux-pm, peterwu.pub,
ChiaEn Wu
Revise RT9467 compatible name from "richtek,rt9467-charger" to
"richtek,rt9467" because it has to match the "compatible name" in
the source code.
Fixes: e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
---
v3:
- Roll back the file name.
v2:
- Add more description about this change in the commit message.
- Rename "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml".
- Rename "$id" as above.
---
.../devicetree/bindings/power/supply/richtek,rt9467-charger.yaml | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
index 92c5706..3723717 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/power/supply/richtek,rt9467-charger.yaml#
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Richtek RT9467 Switching Battery Charger with Power Path Management
@@ -25,7 +25,7 @@ description: |
properties:
compatible:
- const: richtek,rt9467-charger
+ const: richtek,rt9467
reg:
maxItems: 1
@@ -65,7 +65,7 @@ examples:
#size-cells = <0>;
charger@5b {
- compatible = "richtek,rt9467-charger";
+ compatible = "richtek,rt9467";
reg = <0x5b>;
wakeup-source;
interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v3 2/2][next] dt-bindings: power: supply: Rename the file name of RT9467 charger yaml
2023-02-17 8:06 [PATCH v3 0/2][next] Revise Richtek RT9467 documentation compatible name ChiaEn Wu
2023-02-17 8:06 ` [PATCH v3 1/2][next] dt-bindings: power: supply: Revise Richtek RT9467 " ChiaEn Wu
@ 2023-02-17 8:06 ` ChiaEn Wu
2023-02-17 8:53 ` Krzysztof Kozlowski
1 sibling, 1 reply; 5+ messages in thread
From: ChiaEn Wu @ 2023-02-17 8:06 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, sre
Cc: cy_huang, devicetree, linux-kernel, linux-pm, peterwu.pub,
ChiaEn Wu
Rename the file name from "richtek,rt9467-charger.yaml" to
"richtek,rt9467.yaml" to match the "compatible name".
Fixes: e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
---
.../power/supply/richtek,rt9467-charger.yaml | 82 ----------------------
.../bindings/power/supply/richtek,rt9467.yaml | 82 ++++++++++++++++++++++
2 files changed, 82 insertions(+), 82 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
deleted file mode 100644
index 3723717..00000000
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
+++ /dev/null
@@ -1,82 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Richtek RT9467 Switching Battery Charger with Power Path Management
-
-maintainers:
- - ChiYuan Huang <cy_huang@richtek.com>
- - ChiaEn Wu <chiaen_wu@richtek.com>
-
-description: |
- RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
- portable applications. It integrates a synchronous PWM controller, power
- MOSFETs, input current sensing and regulation, high-accuracy voltage
- regulation, and charge termination. The charge current is regulated through
- integrated sensing resistors.
-
- The RT9467 also features USB On-The-Go (OTG) support. It also integrates
- D+/D- pin for USB host/charging port detection.
-
- Datasheet is available at
- https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
-
-properties:
- compatible:
- const: richtek,rt9467
-
- reg:
- maxItems: 1
-
- wakeup-source: true
-
- interrupts:
- maxItems: 1
-
- charge-enable-gpios:
- description: GPIO is used to turn on and off charging.
- maxItems: 1
-
- usb-otg-vbus-regulator:
- type: object
- description: OTG boost regulator.
- unevaluatedProperties: false
- $ref: /schemas/regulator/regulator.yaml#
-
- properties:
- enable-gpios: true
-
-required:
- - compatible
- - reg
- - wakeup-source
- - interrupts
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- charger@5b {
- compatible = "richtek,rt9467";
- reg = <0x5b>;
- wakeup-source;
- interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
- charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
-
- rt9467_otg_vbus: usb-otg-vbus-regulator {
- regulator-name = "rt9467-usb-otg-vbus";
- regulator-min-microvolt = <4425000>;
- regulator-max-microvolt = <5825000>;
- regulator-min-microamp = <500000>;
- regulator-max-microamp = <3000000>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
new file mode 100644
index 00000000..3723717
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9467 Switching Battery Charger with Power Path Management
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+ - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+ RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+ portable applications. It integrates a synchronous PWM controller, power
+ MOSFETs, input current sensing and regulation, high-accuracy voltage
+ regulation, and charge termination. The charge current is regulated through
+ integrated sensing resistors.
+
+ The RT9467 also features USB On-The-Go (OTG) support. It also integrates
+ D+/D- pin for USB host/charging port detection.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
+
+properties:
+ compatible:
+ const: richtek,rt9467
+
+ reg:
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ charge-enable-gpios:
+ description: GPIO is used to turn on and off charging.
+ maxItems: 1
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ unevaluatedProperties: false
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ enable-gpios: true
+
+required:
+ - compatible
+ - reg
+ - wakeup-source
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@5b {
+ compatible = "richtek,rt9467";
+ reg = <0x5b>;
+ wakeup-source;
+ interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+ charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+
+ rt9467_otg_vbus: usb-otg-vbus-regulator {
+ regulator-name = "rt9467-usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ };
+ };
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread