Re: [PATCH v2 07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 26/11/2023 16:44, Dario Binacchi wrote:
> From: Michael Trimarchi <michael@amarulasolutions.com>
> 
> Add documentation for "ilitek,ili9805" panel.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> 
> ---
> 
> Changes in v2:
> - Add $ref to panel-common.yaml
> - Drop port, reset-gpios, and backlight
> - Set port and backlight ad required
> - Replace additionalProperties with unevaluatedProperties
> 
>  .../display/panel/ilitek,ili9805.yaml         | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
> new file mode 100644
> index 000000000000..e08af5f0b2e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ilitek ILI9805 based MIPI-DSI panels
> +
> +maintainers:
> +  - Michael Trimarchi <michael@amarulasolutions.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - giantplus,gpm1790a0
> +      - const: ilitek,ili9805
> +
> +  avdd-supply: true
> +  dvdd-supply: true
> +  power-supply: true

I think power-supply is used as a generic name for cases when specific
supplies are not defined. If you define some specific supplies, then
don't use generic.



Best regards,
Krzysztof