From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Varadarajan Narayanan <quic_varada@quicinc.com>,
agross@kernel.org, andersson@kernel.org, amitk@kernel.org,
thara.gopinath@gmail.com, rafael@kernel.org,
daniel.lezcano@linaro.org, rui.zhang@intel.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Praveenkumar I <quic_ipkumar@quicinc.com>
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
Date: Mon, 8 May 2023 11:00:13 +0200 [thread overview]
Message-ID: <9773aeee-1529-7fd8-b24d-d665e622f8d3@linaro.org> (raw)
In-Reply-To: <af01d0887e78b55f2af0a251837f7d13a00905bc.1683523370.git.quic_varada@quicinc.com>
On 8.05.2023 07:32, Varadarajan Narayanan wrote:
> This patch adds thermal zone nodes for the various
> sensors present in IPQ9574
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v2]:
> Rename clusterX nodes as cpussX nodes
>
> [v1]:
> Fix node names
> ---
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
> 1 file changed, 208 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 85bba6a..5a29ee7 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -1067,6 +1067,214 @@
> };
> };
>
> + thermal-zones {
> + nss-top-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 3>;
> +
> + trips {
> + nss-top-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + ubi-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 4>;
> +
> + trips {
> + ubi_0-critical {
no underscores in node names
Konrad
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + ubi-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 5>;
> +
> + trips {
> + ubi_1-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + ubi-2-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 6>;
> +
> + trips {
> + ubi_2-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + ubi-3-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 7>;
> +
> + trips {
> + ubi_3-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpuss0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 8>;
> +
> + trips {
> + cpu-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpuss1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 9>;
> +
> + trips {
> + cpu-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpu0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 10>;
> +
> + trips {
> + cpu-critical {
> + temperature = <120000>;
> + hysteresis = <10000>;
> + type = "critical";
> + };
> +
> + cpu-passive {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 11>;
> +
> + trips {
> + cpu-critical {
> + temperature = <120000>;
> + hysteresis = <10000>;
> + type = "critical";
> + };
> +
> + cpu-passive {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu2-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 12>;
> +
> + trips {
> + cpu-critical {
> + temperature = <120000>;
> + hysteresis = <10000>;
> + type = "critical";
> + };
> +
> + cpu-passive {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu3-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 13>;
> +
> + trips {
> + cpu-critical {
> + temperature = <120000>;
> + hysteresis = <10000>;
> + type = "critical";
> + };
> +
> + cpu-passive {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + wcss-phyb-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 14>;
> +
> + trips {
> + wcss_phyb-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + top-glue-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&tsens 15>;
> +
> + trips {
> + top_glue-critical {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
prev parent reply other threads:[~2023-05-08 9:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-08 5:32 [PATCH v2 0/3] Enable IPQ9574 TSENS support Varadarajan Narayanan
2023-05-08 5:32 ` [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible Varadarajan Narayanan
2023-05-08 6:26 ` Rob Herring
2023-05-08 6:28 ` Krzysztof Kozlowski
2023-05-08 13:33 ` Krzysztof Kozlowski
2023-05-08 5:32 ` [PATCH v2 2/3] arm64: dts: qcom: ipq9574: add tsens node Varadarajan Narayanan
2023-05-08 11:47 ` Dmitry Baryshkov
2023-05-08 5:32 ` [PATCH v2 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes Varadarajan Narayanan
2023-05-08 9:00 ` Konrad Dybcio [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9773aeee-1529-7fd8-b24d-d665e622f8d3@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=quic_ipkumar@quicinc.com \
--cc=quic_varada@quicinc.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).