Re: [PATCH v2 3/3] arm64: dts: qcom: shikra: Wire up usb-role-switch for USB Type-C ports

[Krzysztof Kozlowski <krzk@kernel.org>]

On 21/08/2026 16:04, Akash Kumar wrote:
> On Shikra CQS/CQM platforms, usb-role-switch is handled by PM4125 on
> the primary Type-C port and Cypress PD controller CYPD6129 on the
> second Type-C port. On Shikra IQS platform, usb-role-switch is
> handled by Cypress PD controller CYPD6129 on both Type-C ports.
> 
> Add the CYPD6129 typec node under i2c3, wire its connector endpoints
> to the corresponding DWC3 controller ports via remote-endpoint
> phandles, and switch the associated USB controllers to OTG mode so
> role switching can take effect.
> 
> Signed-off-by: Akash Kumar <akash.kumar@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts  |  84 ++++++++++++++++++++-
>  arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi |  45 +++++++++++
>  arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts  |  84 ++++++++++++++++++++-
>  arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts  | 107 ++++++++++++++++++++++++++-
>  4 files changed, 309 insertions(+), 11 deletions(-)

Why are you combining DTS in USB patchset? I asked Qualcomm many times
already. Don't.

Best regards,
Krzysztof