Re: [PATCH v3 2/4] arm64: dts: qcom: pm8005: Add temp alarm node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 7/10/26 8:52 AM, Jishnu Prakash wrote:
> Add temperature alarm node along with thermal zone used
> for PMIC thermal mitigation.
> 
> Co-developed-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
> Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/pm8005.dtsi | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> index 0f0ab2da8305..e6f188cefffe 100644
> --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> @@ -4,6 +4,34 @@
>  #include <dt-bindings/spmi/spmi.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  
> +/ {
> +	thermal-zones {
> +		pm8005-thermal {
> +			thermal-sensors = <&pm8005_tz>;
> +
> +			trips {
> +				pm8005_trip0: trip0 {
> +					temperature = <105000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				pm8005_trip1: trip1 {
> +					temperature = <125000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				pm8005_trip2: trip2 {
> +					temperature = <145000>;
> +					hysteresis = <0>;
> +					type = "passive";

hot/critical?

Konrad