From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH v3 7/9] arm: dts: mt7623: enable the usb device on the mt7623n rfb Date: Fri, 12 May 2017 15:56:44 +0800 Message-ID: <98cb8c175852364c58425d7b59fe7b182e2b8d02.1494574682.git.sean.wang@mediatek.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: robh+dt@kernel.org, matthias.bgg@gmail.com, mark.rutland@arm.com, devicetree@vger.kernel.org, john@phrozen.org, linux-mediatek@lists.infradead.org Cc: Sean Wang , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org From: John Crispin All versions of the mt7623n RFB have an USB port so enable the device. There is a gpio that gets used to power up the port supply. Add support for this gpio using the fixed-regulator driver. Signed-off-by: John Crispin Signed-off-by: Sean Wang --- arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi index 4963e6a..2964b4c 100644 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -28,6 +28,15 @@ serial1 = &uart1; serial2 = &uart2; }; + + usb_p1_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &uart0 { @@ -41,3 +50,12 @@ &uart2 { status = "okay"; }; + +&usb1 { + vbus-supply = <&usb_p1_vbus>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; -- 2.7.4