From: Hans Verkuil <hverkuil@xs4all.nl>
To: Marco Felsch <m.felsch@pengutronix.de>,
mchehab@kernel.org, sakari.ailus@linux.intel.com,
hans.verkuil@cisco.com, jacopo+renesas@jmondi.org,
robh+dt@kernel.org
Cc: laurent.pinchart@ideasonboard.com, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, kernel@pengutronix.de,
Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v6 01/13] dt-bindings: connector: analog: add tv norms property
Date: Mon, 6 May 2019 12:01:06 +0200 [thread overview]
Message-ID: <9989034f-4794-adba-d89c-8330bbf7b27f@xs4all.nl> (raw)
In-Reply-To: <20190415124413.18456-2-m.felsch@pengutronix.de>
On 4/15/19 2:44 PM, Marco Felsch wrote:
> Some connectors no matter if in- or output supports only a limited
> range of tv norms. It doesn't matter if the hardware behind that
> connector supports more than the listed formats since the users are
> restriced by a label e.g. to plug only a camera into this connector
> which uses the PAL format.
For S-Video and Composite connectors there are really just two formats
to consider: 50 and 60 Hz. I.e. there is no difference between PAL
and SECAM. Only for tuners/modulators does this matter.
So it is a good idea to add TVNORM_525_60, TVNORM_625_50 to tvnorms.h.
In the various bindings examples I would recommend that you use
TVNORM_525_60 or TVNORM_625_50 rather than e.g. PAL_M since that's what
you would use in practice for Composite/S-Video.
Regards,
Hans
>
> This patch adds the capability to describe such limitation within the
> firmware. There are no format restrictions if the property isn't
> present, so it's completely backward compatible.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> [1] https://patchwork.kernel.org/cover/10794703/
>
> v6:
> - tvnorms.h: use tabs instead of spaces
> - tvnorms.h: add TVNORM_PAL and TVNORM_SECAM
> - tvnorms.h: drop rarely used TVNORM_ATSC_* norms
>
> v2-v4:
> - nothing since the patch was squashed from series [1] into this
> series.
>
> .../display/connector/analog-tv-connector.txt | 4 ++
> include/dt-bindings/media/tvnorms.h | 56 +++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 include/dt-bindings/media/tvnorms.h
>
> diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
> index 0c0970c210ab..346f8937a0b7 100644
> --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
> +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
> @@ -6,6 +6,9 @@ Required properties:
>
> Optional properties:
> - label: a symbolic name for the connector
> +- tvnorms: limit the supported tv norms on a connector to the given ones else
> + all tv norms are allowed. Possible video standards are defined in
> + include/dt-bindings/media/tvnorms.h.
>
> Required nodes:
> - Video port for TV input
> @@ -16,6 +19,7 @@ Example
> tv: connector {
> compatible = "composite-video-connector";
> label = "tv";
> + tvnorms = <(TVNORM_PAL_M | TVNORM_NTSC_M)>;
>
> port {
> tv_connector_in: endpoint {
> diff --git a/include/dt-bindings/media/tvnorms.h b/include/dt-bindings/media/tvnorms.h
> new file mode 100644
> index 000000000000..058ab8414145
> --- /dev/null
> +++ b/include/dt-bindings/media/tvnorms.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0-only or X11 */
> +/*
> + * Copyright 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
> + */
> +
> +#ifndef _DT_BINDINGS_MEDIA_TVNORMS_H
> +#define _DT_BINDINGS_MEDIA_TVNORMS_H
> +
> +/* one bit for each */
> +#define TVNORM_PAL_B 0x00000001
> +#define TVNORM_PAL_B1 0x00000002
> +#define TVNORM_PAL_G 0x00000004
> +#define TVNORM_PAL_H 0x00000008
> +#define TVNORM_PAL_I 0x00000010
> +#define TVNORM_PAL_D 0x00000020
> +#define TVNORM_PAL_D1 0x00000040
> +#define TVNORM_PAL_K 0x00000080
> +
> +#define TVNORM_PAL (TVNORM_PAL_B | \
> + TVNORM_PAL_B1 | \
> + TVNORM_PAL_G | \
> + TVNORM_PAL_H | \
> + TVNORM_PAL_I | \
> + TVNORM_PAL_D | \
> + TVNORM_PAL_D1 | \
> + TVNORM_PAL_K)
> +
> +#define TVNORM_PAL_M 0x00000100
> +#define TVNORM_PAL_N 0x00000200
> +#define TVNORM_PAL_Nc 0x00000400
> +#define TVNORM_PAL_60 0x00000800
> +
> +#define TVNORM_NTSC_M 0x00001000 /* BTSC */
> +#define TVNORM_NTSC_M_JP 0x00002000 /* EIA-J */
> +#define TVNORM_NTSC_443 0x00004000
> +#define TVNORM_NTSC_M_KR 0x00008000 /* FM A2 */
> +
> +#define TVNORM_SECAM_B 0x00010000
> +#define TVNORM_SECAM_D 0x00020000
> +#define TVNORM_SECAM_G 0x00040000
> +#define TVNORM_SECAM_H 0x00080000
> +#define TVNORM_SECAM_K 0x00100000
> +#define TVNORM_SECAM_K1 0x00200000
> +#define TVNORM_SECAM_L 0x00400000
> +#define TVNORM_SECAM_LC 0x00800000
> +
> +#define TVNORM_SECAM (TVNORM_SECAM_B | \
> + TVNORM_SECAM_D | \
> + TVNORM_SECAM_G | \
> + TVNORM_SECAM_H | \
> + TVNORM_SECAM_K | \
> + TVNORM_SECAM_K1 | \
> + TVNORM_SECAM_L | \
> + TVNORM_SECAM_LC)
> +
> +#endif /* _DT_BINDINGS_MEDIA_TVNORMS_H */
>
next prev parent reply other threads:[~2019-05-06 10:01 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-15 12:44 [PATCH v6 00/13] TVP5150 new features Marco Felsch
2019-04-15 12:44 ` [PATCH v6 01/13] dt-bindings: connector: analog: add tv norms property Marco Felsch
2019-05-06 10:01 ` Hans Verkuil [this message]
2019-05-06 10:06 ` Hans Verkuil
2019-05-14 18:11 ` Mauro Carvalho Chehab
2019-08-09 6:00 ` Marco Felsch
2019-05-16 16:27 ` Laurent Pinchart
2019-08-09 5:58 ` Marco Felsch
2019-08-15 12:33 ` Laurent Pinchart
2019-08-15 12:50 ` Marco Felsch
2019-08-15 13:02 ` Laurent Pinchart
2019-08-15 13:35 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 02/13] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2019-05-06 9:50 ` Hans Verkuil
2019-05-14 18:17 ` Mauro Carvalho Chehab
2019-08-09 7:20 ` Marco Felsch
2019-05-16 16:36 ` Laurent Pinchart
2019-08-09 7:55 ` Marco Felsch
2019-08-15 12:38 ` Laurent Pinchart
2019-08-15 13:04 ` Marco Felsch
2019-08-15 13:10 ` Laurent Pinchart
2019-08-15 13:37 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 03/13] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2019-05-06 10:10 ` Hans Verkuil
2019-05-14 18:20 ` Mauro Carvalho Chehab
2019-05-16 16:51 ` Laurent Pinchart
2019-08-09 12:16 ` Marco Felsch
2019-08-15 12:48 ` Laurent Pinchart
2019-08-15 13:14 ` Marco Felsch
2019-08-09 8:59 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 04/13] partial revert of "[media] tvp5150: add HW input connectors support" Marco Felsch
2019-04-15 12:44 ` [PATCH v6 05/13] media: tvp5150: add input source selection of_graph support Marco Felsch
2019-05-06 10:09 ` Jacopo Mondi
2019-05-14 18:25 ` Mauro Carvalho Chehab
2019-05-16 18:03 ` Laurent Pinchart
2019-08-13 8:54 ` Marco Felsch
2019-08-15 12:51 ` Laurent Pinchart
2019-08-15 13:22 ` Marco Felsch
2019-08-15 13:26 ` Laurent Pinchart
2019-04-15 12:44 ` [PATCH v6 06/13] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2019-05-14 18:27 ` Mauro Carvalho Chehab
2019-05-16 18:05 ` Laurent Pinchart
2019-08-13 8:56 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 07/13] media: tvp5150: add FORMAT_TRY support for get/set selection handlers Marco Felsch
2019-05-06 13:36 ` Jacopo Mondi
2019-08-09 5:33 ` Marco Felsch
2019-05-14 18:48 ` Mauro Carvalho Chehab
2019-08-09 5:34 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 08/13] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2019-05-14 20:20 ` Mauro Carvalho Chehab
2019-08-09 5:42 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 09/13] media: tvp5150: add s_power callback Marco Felsch
2019-05-14 20:13 ` Mauro Carvalho Chehab
2019-08-09 5:39 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 10/13] media: dt-bindings: tvp5150: cleanup bindings stlye Marco Felsch
2019-04-15 12:44 ` [PATCH v6 11/13] media: dt-bindings: tvp5150: add optional tvnorms documentation Marco Felsch
2019-04-15 12:44 ` [PATCH v6 12/13] media: tvp5150: add support to limit tv norms on connector Marco Felsch
2019-05-16 18:07 ` Laurent Pinchart
2019-08-13 9:10 ` Marco Felsch
2019-08-15 12:53 ` Laurent Pinchart
2019-08-15 13:26 ` Marco Felsch
2019-04-15 12:44 ` [PATCH v6 13/13] media: tvp5150: make debug output more readable Marco Felsch
2019-05-06 13:39 ` Jacopo Mondi
2019-05-14 20:18 ` Mauro Carvalho Chehab
2019-08-09 5:42 ` Marco Felsch
2019-05-06 5:47 ` [PATCH v6 00/13] TVP5150 new features Marco Felsch
2019-05-14 17:18 ` Mauro Carvalho Chehab
2019-05-14 20:20 ` Mauro Carvalho Chehab
2019-05-14 20:58 ` Marco Felsch
2019-05-14 23:41 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9989034f-4794-adba-d89c-8330bbf7b27f@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=jacopo+renesas@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).