* [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550
2022-11-23 15:36 [PATCH v2 0/2] regulator: qcom-rpmh: Add support for PM8550 Abel Vesa
@ 2022-11-23 15:36 ` Abel Vesa
2022-11-24 9:55 ` Krzysztof Kozlowski
2022-11-23 15:36 ` [PATCH v2 2/2] regulator: qcom-rpmh: Add support for PM8550 regulators Abel Vesa
2022-11-24 12:03 ` [PATCH v2 0/2] regulator: qcom-rpmh: Add support for PM8550 Mark Brown
2 siblings, 1 reply; 5+ messages in thread
From: Abel Vesa @ 2022-11-23 15:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood,
Mark Brown, Rob Herring, Krzysztof Kozlowski
Cc: Linux Kernel Mailing List, devicetree, linux-arm-msm
Add compatible string for PM8550 used in SM8550 boards.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes since v1:
* changed subject line according to Krzysztof's suggestion
* dropped unrelated changes reported by Krzysztof
.../regulator/qcom,rpmh-regulator.yaml | 26 +++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 7ff51b558702..297a75069f60 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -47,6 +47,7 @@ description: |
For PM8350, smps1 - smps12, ldo1 - ldo10
For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
For PM8450, smps1 - smps6, ldo1 - ldo4
+ For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2
For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
For PMI8998, bob
For PMR735A, smps1 - smps3, ldo1 - ldo7
@@ -70,6 +71,9 @@ properties:
- qcom,pm8350-rpmh-regulators
- qcom,pm8350c-rpmh-regulators
- qcom,pm8450-rpmh-regulators
+ - qcom,pm8550-rpmh-regulators
+ - qcom,pm8550ve-rpmh-regulators
+ - qcom,pm8550vs-rpmh-regulators
- qcom,pm8998-rpmh-regulators
- qcom,pmg1110-rpmh-regulators
- qcom,pmi8998-rpmh-regulators
@@ -83,7 +87,7 @@ properties:
RPMh resource name suffix used for the regulators found
on this PMIC.
$ref: /schemas/types.yaml#/definitions/string
- enum: [a, b, c, d, e, f, h, k]
+ enum: [a, b, c, d, e, f, g, h, k]
qcom,always-wait-for-ack:
description: |
@@ -107,7 +111,7 @@ properties:
regulator-allow-set-load: ["regulator-allowed-modes"]
patternProperties:
- "^(smps|ldo|lvs)[0-9]+$":
+ "^(smps|ldo|lvs|bob)[0-9]+$":
type: object
$ref: "regulator.yaml#"
description: smps/ldo regulator nodes(s).
@@ -299,6 +303,24 @@ allOf:
"^vdd-l[1-4]-supply$": true
"^vdd-s[1-6]-supply$": true
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,pm8550-rpmh-regulators
+ - qcom,pm8550ve-rpmh-regulators
+ - qcom,pm8550vs-rpmh-regulators
+ then:
+ properties:
+ vdd-l2-l13-l14-supply: true
+ vdd-l5-l16-supply: true
+ vdd-l6-l7-supply: true
+ vdd-l8-l9-supply: true
+ patternProperties:
+ "^vdd-l([1-4]|1[0-7])-supply$": true
+ "^vdd-s[1-6]-supply$": true
+ "^vdd-bob[1-2]-supply$": true
+
- if:
properties:
compatible:
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 2/2] regulator: qcom-rpmh: Add support for PM8550 regulators
2022-11-23 15:36 [PATCH v2 0/2] regulator: qcom-rpmh: Add support for PM8550 Abel Vesa
2022-11-23 15:36 ` [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: Add compatible " Abel Vesa
@ 2022-11-23 15:36 ` Abel Vesa
2022-11-24 12:03 ` [PATCH v2 0/2] regulator: qcom-rpmh: Add support for PM8550 Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2022-11-23 15:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood,
Mark Brown, Rob Herring, Krzysztof Kozlowski
Cc: Linux Kernel Mailing List, devicetree, linux-arm-msm
Add the rpmh regulators found in PM8550 PMIC and its variants,
along with their compatibles and configuration data. They also
contain some FT-SMPS 525, so add their configuration as well.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Changes since v1:
* Made the commit message describe better the changes
* Added Konrad's R-b tag
drivers/regulator/qcom-rpmh-regulator.c | 81 +++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index f90bcdeecea5..43b5b9377714 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -731,6 +731,24 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps520 = {
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
+static const struct rpmh_vreg_hw_data pmic5_ftsmps525_lv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 267, 4000),
+ .n_voltages = 268,
+ .pmic_mode_map = pmic_mode_map_pmic5_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_ftsmps525_mv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(600000, 0, 267, 8000),
+ .n_voltages = 268,
+ .pmic_mode_map = pmic_mode_map_pmic5_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
@@ -987,6 +1005,57 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = {
{}
};
+static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l6-l7"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l6-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l8-l9"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l11"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo, "vdd-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l17"),
+ RPMH_VREG("bob1", "bob%s1", &pmic5_bob, "vdd-bob1"),
+ RPMH_VREG("bob2", "bob%s2", &pmic5_bob, "vdd-bob2"),
+ {}
+};
+
+static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_mv, "vdd-s6"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ {}
+};
+
+static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ {}
+};
+
static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"),
@@ -1314,6 +1383,18 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.compatible = "qcom,pm8450-rpmh-regulators",
.data = pm8450_vreg_data,
},
+ {
+ .compatible = "qcom,pm8550-rpmh-regulators",
+ .data = pm8550_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8550ve-rpmh-regulators",
+ .data = pm8550ve_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8550vs-rpmh-regulators",
+ .data = pm8550vs_vreg_data,
+ },
{
.compatible = "qcom,pm8998-rpmh-regulators",
.data = pm8998_vreg_data,
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread