From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 06/14] arm64: dts: qcom: msm8996: rename labels for DSI nodes
Date: Wed, 31 May 2023 11:41:04 +0200 [thread overview]
Message-ID: <9afc0124-cb38-5621-7de3-0d8c51e70ce4@linaro.org> (raw)
In-Reply-To: <20230531011623.3808538-7-dmitry.baryshkov@linaro.org>
On 31.05.2023 03:16, Dmitry Baryshkov wrote:
> Currently in board files MDSS and DSI nodes stay apart, because labels
> for DSI nodes do not have the mdss_ prefix. It was found that grouping
> all display-related notes is more useful.
>
> To keep all display-related nodes close in the board files, change DSI
> node labels from dsi_* to mdss_dsi_*.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> .../boot/dts/qcom/msm8996-oneplus-common.dtsi | 30 ++++++++--------
> .../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 22 ++++++------
> .../boot/dts/qcom/msm8996-xiaomi-gemini.dts | 18 +++++-----
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 36 +++++++++----------
> .../dts/qcom/msm8996pro-xiaomi-natrium.dts | 18 +++++-----
> 5 files changed, 62 insertions(+), 62 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> index 2adadc1e5b7c..ec5457508fe6 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> @@ -164,21 +164,6 @@ &camss {
> vdda-supply = <&vreg_l2a_1p25>;
> };
>
> -&dsi0 {
> - vdda-supply = <&vreg_l2a_1p25>;
> - vcca-supply = <&vreg_l22a_3p0>;
> - status = "okay";
> -};
> -
> -&dsi0_out {
> - data-lanes = <0 1 2 3>;
> -};
> -
> -&dsi0_phy {
> - vcca-supply = <&vreg_l28a_0p925>;
> - status = "okay";
> -};
> -
> &hsusb_phy1 {
> vdd-supply = <&vreg_l28a_0p925>;
> vdda-pll-supply = <&vreg_l12a_1p8>;
> @@ -201,6 +186,21 @@ &mdss {
> status = "okay";
> };
>
> +&mdss_dsi0 {
> + vdda-supply = <&vreg_l2a_1p25>;
> + vcca-supply = <&vreg_l22a_3p0>;
> + status = "okay";
> +};
> +
> +&mdss_dsi0_out {
> + data-lanes = <0 1 2 3>;
> +};
> +
> +&mdss_dsi0_phy {
> + vcca-supply = <&vreg_l28a_0p925>;
> + status = "okay";
> +};
> +
> &mmcc {
> vdd-gfx-supply = <&vdd_gfx>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> index 1ce5df0a3405..47f55c7311e9 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> @@ -235,7 +235,15 @@ bluetooth: bluetooth {
> };
> };
>
> -&dsi0 {
> +&gpu {
> + status = "okay";
> +};
> +
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_dsi0 {
> status = "okay";
>
> vdd-supply = <&vreg_l2a_1p25>;
> @@ -246,26 +254,18 @@ &dsi0 {
> pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
> };
>
> -&dsi0_out {
> +&mdss_dsi0_out {
> status = "okay";
>
> data-lanes = <0 1 2 3>;
> };
>
> -&dsi0_phy {
> +&mdss_dsi0_phy {
> status = "okay";
>
> vcca-supply = <&vreg_l28a_0p925>;
> };
>
> -&gpu {
> - status = "okay";
> -};
> -
> -&mdss {
> - status = "okay";
> -};
> -
> &mmcc {
> vdd-gfx-supply = <&vdd_gfx>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> index 100123d51494..bdedcf9dff03 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> @@ -93,7 +93,13 @@ synaptics@20 {
>
> };
>
> -&dsi0 {
> +&gpu {
> + zap-shader {
> + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
> + };
> +};
> +
> +&mdss_dsi0 {
> status = "okay";
>
> vdd-supply = <&vreg_l2a_1p25>;
> @@ -112,22 +118,16 @@ panel: panel@0 {
>
> port {
> panel_in: endpoint {
> - remote-endpoint = <&dsi0_out>;
> + remote-endpoint = <&mdss_dsi0_out>;
> };
> };
> };
> };
>
> -&dsi0_out {
> +&mdss_dsi0_out {
> remote-endpoint = <&panel_in>;
> };
>
> -&gpu {
> - zap-shader {
> - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
> - };
> -};
> -
> &pmi8994_wled {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index f75932cc2a30..3855366ca89f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -891,10 +891,10 @@ mmcc: clock-controller@8c0000 {
> clocks = <&xo_board>,
> <&gcc GPLL0>,
> <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
> - <&dsi0_phy 1>,
> - <&dsi0_phy 0>,
> - <&dsi1_phy 1>,
> - <&dsi1_phy 0>,
> + <&mdss_dsi0_phy 1>,
> + <&mdss_dsi0_phy 0>,
> + <&mdss_dsi1_phy 1>,
> + <&mdss_dsi1_phy 0>,
> <&hdmi_phy>;
> clock-names = "xo",
> "gpll0",
> @@ -987,20 +987,20 @@ mdp5_intf3_out: endpoint {
> port@1 {
> reg = <1>;
> mdp5_intf1_out: endpoint {
> - remote-endpoint = <&dsi0_in>;
> + remote-endpoint = <&mdss_dsi0_in>;
> };
> };
>
> port@2 {
> reg = <2>;
> mdp5_intf2_out: endpoint {
> - remote-endpoint = <&dsi1_in>;
> + remote-endpoint = <&mdss_dsi1_in>;
> };
> };
> };
> };
>
> - dsi0: dsi@994000 {
> + mdss_dsi0: dsi@994000 {
> compatible = "qcom,msm8996-dsi-ctrl",
> "qcom,mdss-dsi-ctrl";
> reg = <0x00994000 0x400>;
> @@ -1024,9 +1024,9 @@ dsi0: dsi@994000 {
> "pixel",
> "core";
> assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
> - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
> + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
>
> - phys = <&dsi0_phy>;
> + phys = <&mdss_dsi0_phy>;
> status = "disabled";
>
> #address-cells = <1>;
> @@ -1038,20 +1038,20 @@ ports {
>
> port@0 {
> reg = <0>;
> - dsi0_in: endpoint {
> + mdss_dsi0_in: endpoint {
> remote-endpoint = <&mdp5_intf1_out>;
> };
> };
>
> port@1 {
> reg = <1>;
> - dsi0_out: endpoint {
> + mdss_dsi0_out: endpoint {
> };
> };
> };
> };
>
> - dsi0_phy: phy@994400 {
> + mdss_dsi0_phy: phy@994400 {
> compatible = "qcom,dsi-phy-14nm";
> reg = <0x00994400 0x100>,
> <0x00994500 0x300>,
> @@ -1068,7 +1068,7 @@ dsi0_phy: phy@994400 {
> status = "disabled";
> };
>
> - dsi1: dsi@996000 {
> + mdss_dsi1: dsi@996000 {
> compatible = "qcom,msm8996-dsi-ctrl",
> "qcom,mdss-dsi-ctrl";
> reg = <0x00996000 0x400>;
> @@ -1092,9 +1092,9 @@ dsi1: dsi@996000 {
> "pixel",
> "core";
> assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
> - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
> + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
>
> - phys = <&dsi1_phy>;
> + phys = <&mdss_dsi1_phy>;
> status = "disabled";
>
> #address-cells = <1>;
> @@ -1106,20 +1106,20 @@ ports {
>
> port@0 {
> reg = <0>;
> - dsi1_in: endpoint {
> + mdss_dsi1_in: endpoint {
> remote-endpoint = <&mdp5_intf2_out>;
> };
> };
>
> port@1 {
> reg = <1>;
> - dsi1_out: endpoint {
> + mdss_dsi1_out: endpoint {
> };
> };
> };
> };
>
> - dsi1_phy: phy@996400 {
> + mdss_dsi1_phy: phy@996400 {
> compatible = "qcom,dsi-phy-14nm";
> reg = <0x00996400 0x100>,
> <0x00996500 0x300>,
> diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
> index d18d0b0eda95..7957c8823f0d 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
> @@ -39,7 +39,13 @@ touchscreen@20 {
> };
> };
>
> -&dsi0 {
> +&gpu {
> + zap-shader {
> + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
> + };
> +};
> +
> +&mdss_dsi0 {
> status = "okay";
>
> vdda-supply = <&vreg_l2a_1p25>;
> @@ -57,22 +63,16 @@ panel: panel@0 {
>
> port {
> panel_in: endpoint {
> - remote-endpoint = <&dsi0_out>;
> + remote-endpoint = <&mdss_dsi0_out>;
> };
> };
> };
> };
>
> -&dsi0_out {
> +&mdss_dsi0_out {
> remote-endpoint = <&panel_in>;
> };
>
> -&gpu {
> - zap-shader {
> - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
> - };
> -};
> -
> &mss_pil {
> firmware-name = "qcom/msm8996/natrium/mba.mbn",
> "qcom/msm8996/natrium/modem.mbn";
next prev parent reply other threads:[~2023-05-31 9:41 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 1:16 [PATCH 00/14] arm/arm64: dts: qcom: MDSS nodes cleanup Dmitry Baryshkov
2023-05-31 1:16 ` [PATCH 01/14] arm64: dts: qcom: sc7280: Don't disable MDP explicitly Dmitry Baryshkov
2023-05-31 9:38 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 02/14] arm64: dts: qcom: sm8350-hdk: remove useless enablement of mdss_mdp Dmitry Baryshkov
2023-05-31 9:38 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 03/14] arm64: dts: qcom: sm8450-hdk: " Dmitry Baryshkov
2023-05-31 9:38 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 04/14] arm64: dts: qcom: qrb5165-rb5: " Dmitry Baryshkov
2023-05-31 9:39 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 05/14] arm64: dts: qcom: msm8953: rename labels for DSI nodes Dmitry Baryshkov
2023-05-31 9:40 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 06/14] arm64: dts: qcom: msm8996: " Dmitry Baryshkov
2023-05-31 9:41 ` Konrad Dybcio [this message]
2023-05-31 1:16 ` [PATCH 07/14] arm64: dts: qcom: sc7180: " Dmitry Baryshkov
2023-05-31 9:42 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 08/14] arm64: dts: qcom: sc7280: " Dmitry Baryshkov
2023-05-31 9:42 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 09/14] arm64: dts: qcom: sc8180x: " Dmitry Baryshkov
2023-05-31 9:43 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 10/14] arm64: dts: qcom: sdm630: " Dmitry Baryshkov
2023-05-31 9:43 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 11/14] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
2023-05-31 9:44 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 12/14] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
2023-05-31 9:45 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 13/14] arm64: dts: qcom: msm8996: rename labels for HDMI nodes Dmitry Baryshkov
2023-05-31 9:45 ` Konrad Dybcio
2023-05-31 1:16 ` [PATCH 14/14] ARM: dts: qcom: msm8974: rename labels for DSI nodes Dmitry Baryshkov
2023-05-31 9:46 ` Konrad Dybcio
2023-06-13 23:48 ` (subset) [PATCH 00/14] arm/arm64: dts: qcom: MDSS nodes cleanup Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9afc0124-cb38-5621-7de3-0d8c51e70ce4@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).