public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Rishikesh Donadkar <r-donadkar@ti.com>
Cc: y-abhilashchandra@ti.com, devarsht@ti.com, s-jain1@ti.com,
	vigneshr@ti.com, mchehab@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, p.zabel@pengutronix.de, conor+dt@kernel.org,
	sakari.ailus@linux.intel.com, hverkuil-cisco@xs4all.nl,
	jai.luthra@ideasonboard.com, changhuang.liang@starfivetech.com,
	jack.zhu@starfivetech.com, sjoerd@collabora.com,
	dan.carpenter@linaro.org, hverkuil+cisco@kernel.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	devicetree@vger.kernel.org, jai.luthra@linux.dev,
	laurent.pinchart@ideasonboard.com, mripard@kernel.org
Subject: Re: [PATCH v9 19/19] media: ti: j721e-csi2rx: Support system suspend using pm_notifier
Date: Thu, 15 Jan 2026 14:50:01 +0200	[thread overview]
Message-ID: <9bf5fd69-4ff6-40c5-aa22-e6330bf8e323@ideasonboard.com> (raw)
In-Reply-To: <20251230083220.2405247-20-r-donadkar@ti.com>

Hi,

On 30/12/2025 10:32, Rishikesh Donadkar wrote:
> From: Jai Luthra <jai.luthra@ideasonboard.com>
> 
> As this device is the "orchestrator" for the rest of the media
> pipeline, we need to stop all on-going streams before system suspend and
> enable them back when the system wakes up from sleep.
> 
> Using .suspend/.resume callbacks does not work, as the order of those
> callbacks amongst various devices in the camera pipeline like the sensor,
> FPD serdes, CSI bridge etc. is impossible to enforce, even with
> device links. For example, the Cadence CSI bridge is a child device of
> this device, thus we cannot create a device link with the CSI bridge as
> a provider and this device as consumer. This can lead to situations
> where all the dependencies for the bridge have not yet resumed when we
> request the subdev to start streaming again through the .resume callback
> defined in this device.
> 
> Instead here we register a notifier callback with the PM framework
> which is triggered when the system is fully functional. At this point we
> can cleanly stop or start the streams, because we know all other devices
> and their dependencies are functional. A downside of this approach is
> that the userspace is also alive (not frozen yet, or just thawed), so
> the suspend notifier might complete before the userspace has completed
> all ioctls, like QBUF/DQBUF/STREAMON/STREAMOFF.

It would be good to have at least parts of the explanation here in a
comment, before the register_pm_notifier() call.

 Tomi

> Tested-by: Rishikesh Donadkar <r-donadkar@ti.com>
> Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
> Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
> Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
> ---
>  .../platform/ti/j721e-csi2rx/j721e-csi2rx.c   | 128 ++++++++++++++++++
>  1 file changed, 128 insertions(+)
> 
> diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> index 72da58738e16e..f8e55aa402e0b 100644
> --- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> +++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> @@ -132,6 +132,7 @@ struct ti_csi2rx_dev {
>  	struct v4l2_subdev		*source;
>  	struct v4l2_subdev		subdev;
>  	struct ti_csi2rx_ctx		ctx[TI_CSI2RX_MAX_CTX];
> +	struct notifier_block		pm_notifier;
>  	u8				pix_per_clk;
>  	/* Buffer to drain stale data from PSI-L endpoint */
>  	struct {
> @@ -1539,6 +1540,124 @@ static int ti_csi2rx_runtime_resume(struct device *dev)
>  	return 0;
>  }
>  
> +static int ti_csi2rx_suspend(struct device *dev)
> +{
> +	struct ti_csi2rx_dev *csi = dev_get_drvdata(dev);
> +	enum ti_csi2rx_dma_state state;
> +	struct ti_csi2rx_ctx *ctx;
> +	struct ti_csi2rx_dma *dma;
> +	unsigned long flags = 0;
> +	int i, ret = 0;
> +
> +	/* If device was not in use we can simply suspend */
> +	if (pm_runtime_status_suspended(dev))
> +		return 0;
> +
> +	/*
> +	 * If device is running, assert the pixel reset to cleanly stop any
> +	 * on-going streams before we suspend.
> +	 */
> +	writel(0, csi->shim + SHIM_CNTL);
> +
> +	for (i = 0; i < csi->num_ctx; i++) {
> +		ctx = &csi->ctx[i];
> +		dma = &ctx->dma;
> +
> +		spin_lock_irqsave(&dma->lock, flags);
> +		state = dma->state;
> +		spin_unlock_irqrestore(&dma->lock, flags);
> +
> +		if (state != TI_CSI2RX_DMA_STOPPED) {
> +			/* Disable source */
> +			ret = v4l2_subdev_disable_streams(&csi->subdev,
> +							  TI_CSI2RX_PAD_FIRST_SOURCE + ctx->idx,
> +							  BIT(0));
> +			if (ret)
> +				dev_err(csi->dev, "Failed to stop subdev stream\n");
> +		}
> +
> +		/* Stop any on-going streams */
> +		writel(0, csi->shim + SHIM_DMACNTX(ctx->idx));
> +
> +		/* Drain DMA */
> +		ti_csi2rx_drain_dma(ctx);
> +
> +		/* Terminate DMA */
> +		ret = dmaengine_terminate_sync(ctx->dma.chan);
> +		if (ret)
> +			dev_err(csi->dev, "Failed to stop DMA\n");
> +	}
> +
> +	return ret;
> +}
> +
> +static int ti_csi2rx_resume(struct device *dev)
> +{
> +	struct ti_csi2rx_dev *csi = dev_get_drvdata(dev);
> +	struct ti_csi2rx_ctx *ctx;
> +	struct ti_csi2rx_dma *dma;
> +	struct ti_csi2rx_buffer *buf;
> +	unsigned long flags = 0;
> +	unsigned int reg;
> +	int i, ret = 0;
> +
> +	/* If device was not in use, we can simply wakeup */
> +	if (pm_runtime_status_suspended(dev))
> +		return 0;
> +
> +	/* If device was in use before, restore all the running streams */
> +	reg = SHIM_CNTL_PIX_RST;
> +	writel(reg, csi->shim + SHIM_CNTL);
> +
> +	for (i = 0; i < csi->num_ctx; i++) {
> +		ctx = &csi->ctx[i];
> +		dma = &ctx->dma;
> +		spin_lock_irqsave(&dma->lock, flags);
> +		if (dma->state != TI_CSI2RX_DMA_STOPPED) {
> +			/* Re-submit all previously submitted buffers to DMA */
> +			list_for_each_entry(buf, &ctx->dma.submitted, list) {
> +				ti_csi2rx_start_dma(ctx, buf);
> +			}
> +			spin_unlock_irqrestore(&dma->lock, flags);
> +
> +			/* Restore stream config */
> +			ti_csi2rx_setup_shim(ctx);
> +
> +			ret = v4l2_subdev_enable_streams(&csi->subdev,
> +							 TI_CSI2RX_PAD_FIRST_SOURCE + ctx->idx,
> +							 BIT(0));
> +			if (ret)
> +				dev_err(ctx->csi->dev, "Failed to start subdev\n");
> +		} else {
> +			spin_unlock_irqrestore(&dma->lock, flags);
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int ti_csi2rx_pm_notifier(struct notifier_block *nb,
> +				 unsigned long action, void *data)
> +{
> +	struct ti_csi2rx_dev *csi =
> +		container_of(nb, struct ti_csi2rx_dev, pm_notifier);
> +
> +	switch (action) {
> +	case PM_HIBERNATION_PREPARE:
> +	case PM_SUSPEND_PREPARE:
> +	case PM_RESTORE_PREPARE:
> +		ti_csi2rx_suspend(csi->dev);
> +		break;
> +	case PM_POST_SUSPEND:
> +	case PM_POST_HIBERNATION:
> +	case PM_POST_RESTORE:
> +		ti_csi2rx_resume(csi->dev);
> +		break;
> +	}
> +
> +	return NOTIFY_DONE;
> +}
> +
>  static const struct dev_pm_ops ti_csi2rx_pm_ops = {
>  	RUNTIME_PM_OPS(ti_csi2rx_runtime_suspend, ti_csi2rx_runtime_resume,
>  		       NULL)
> @@ -1613,6 +1732,13 @@ static int ti_csi2rx_probe(struct platform_device *pdev)
>  		goto err_notifier;
>  	}
>  
> +	csi->pm_notifier.notifier_call = ti_csi2rx_pm_notifier;
> +	ret = register_pm_notifier(&csi->pm_notifier);
> +	if (ret) {
> +		dev_err(csi->dev, "Failed to create PM notifier: %d\n", ret);
> +		goto err_notifier;
> +	}
> +
>  	return 0;
>  
>  err_notifier:
> @@ -1642,6 +1768,8 @@ static void ti_csi2rx_remove(struct platform_device *pdev)
>  		ti_csi2rx_cleanup_ctx(&csi->ctx[i]);
>  
>  	ti_csi2rx_cleanup_notifier(csi);
> +	unregister_pm_notifier(&csi->pm_notifier);
> +
>  	ti_csi2rx_cleanup_v4l2(csi);
>  	mutex_destroy(&csi->mutex);
>  	dma_free_coherent(csi->dev, csi->drain.len, csi->drain.vaddr,


  reply	other threads:[~2026-01-15 12:50 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-30  8:32 [PATCH v9 00/19] media: cadence,ti: CSI2RX Multistream Support Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 01/19] media: ti: j721e-csi2rx: Remove word size alignment on frame width Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 02/19] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 03/19] media: ti: j721e-csi2rx: separate out device and context Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 04/19] media: ti: j721e-csi2rx: prepare SHIM code for multiple contexts Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 05/19] media: ti: j721e-csi2rx: allocate DMA channel based on context index Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 06/19] media: ti: j721e-csi2rx: add a subdev for the core device Rishikesh Donadkar
2026-01-14 15:21   ` Tomi Valkeinen
2026-01-15  6:36     ` Jai Luthra
2026-01-15 12:56       ` Tomi Valkeinen
2026-01-20 23:25         ` Laurent Pinchart
2026-01-21  7:38           ` Tomi Valkeinen
2026-01-21 10:52             ` Laurent Pinchart
2026-01-22  6:53               ` Jai Luthra
2026-01-22  9:53                 ` Laurent Pinchart
2026-02-28 17:49                   ` Jai Luthra
2026-01-21  9:10     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 07/19] media: cadence: csi2rx: Move to .enable/disable_streams API Rishikesh Donadkar
2026-01-14 15:25   ` Tomi Valkeinen
2025-12-30  8:32 ` [PATCH v9 08/19] media: staging: starfive: Move to enabel-disable streams in starfive drivers Rishikesh Donadkar
2026-01-14 12:51   ` Jai Luthra
2026-01-14 13:05     ` Laurent Pinchart
2025-12-30  8:32 ` [PATCH v9 09/19] media: ti: j721e-csi2rx: get number of contexts from device tree Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 10/19] media: cadence: csi2rx: add get_frame_desc wrapper Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 11/19] media: ti: j721e-csi2rx: add support for processing virtual channels Rishikesh Donadkar
2026-01-14 15:31   ` Tomi Valkeinen
2026-01-16 10:28     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 12/19] media: cadence: csi2rx: add multistream support Rishikesh Donadkar
2026-01-15 12:01   ` Tomi Valkeinen
2026-01-16 11:04     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 13/19] media: ti: j721e-csi2rx: " Rishikesh Donadkar
2026-01-15 12:27   ` Tomi Valkeinen
2026-01-20  8:48     ` Rishikesh Donadkar
2026-01-15 12:28   ` Tomi Valkeinen
2026-01-20  8:52     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 14/19] media: ti: j721e-csi2rx: Submit all available buffers Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 15/19] media: ti: j721e-csi2rx: Change the drain architecture for multistream Rishikesh Donadkar
2026-01-15 12:37   ` Tomi Valkeinen
2026-01-15 16:02     ` Jai Luthra
2026-01-16 10:11       ` Vignesh Raghavendra
2026-01-19  5:08       ` Rishikesh Donadkar
2026-01-19  5:04     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 16/19] media: ti: j721e-csi2rx: Return the partial frame as error Rishikesh Donadkar
2026-01-06 11:15   ` Jai Luthra
2026-01-08  5:37     ` Rishikesh Donadkar
2026-01-15 12:39   ` Tomi Valkeinen
2025-12-30  8:32 ` [PATCH v9 17/19] media: cadence: csi2rx: Support runtime PM Rishikesh Donadkar
2026-01-14 17:04   ` Tomi Valkeinen
2025-12-30  8:32 ` [PATCH v9 18/19] media: ti: j721e-csi2rx: Support runtime suspend Rishikesh Donadkar
2026-01-15 12:46   ` Tomi Valkeinen
2026-01-19  6:04     ` Jai Luthra
2025-12-30  8:32 ` [PATCH v9 19/19] media: ti: j721e-csi2rx: Support system suspend using pm_notifier Rishikesh Donadkar
2026-01-15 12:50   ` Tomi Valkeinen [this message]
2026-01-19  5:25     ` Rishikesh Donadkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9bf5fd69-4ff6-40c5-aa22-e6330bf8e323@ideasonboard.com \
    --to=tomi.valkeinen@ideasonboard.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=dan.carpenter@linaro.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jack.zhu@starfivetech.com \
    --cc=jai.luthra@ideasonboard.com \
    --cc=jai.luthra@linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=r-donadkar@ti.com \
    --cc=robh@kernel.org \
    --cc=s-jain1@ti.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sjoerd@collabora.com \
    --cc=vigneshr@ti.com \
    --cc=y-abhilashchandra@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox