From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: dts: sti: align LED node names with dtschema
Date: Mon, 28 Nov 2022 09:30:18 +0100 [thread overview]
Message-ID: <9cece196-97ed-4d4b-79e0-f34adb785bf4@foss.st.com> (raw)
In-Reply-To: <20221125144116.476877-1-krzysztof.kozlowski@linaro.org>
Hi Krzysztof
On 11/25/22 15:41, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern:
>
> stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm/boot/dts/stih410-b2260.dts | 8 ++++----
> arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
> arch/arm/boot/dts/stih418-b2264.dts | 2 +-
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
> 4 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index 26d93f26f6d0..240b62040000 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -27,26 +27,26 @@ aliases {
>
> leds {
> compatible = "gpio-leds";
> - user_green_1 {
> + led-user-green-1 {
> label = "User_green_1";
> gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> default-state = "off";
> };
>
> - user_green_2 {
> + led-user-green-2 {
> label = "User_green_2";
> gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> - user_green_3 {
> + led-user-green-3 {
> label = "User_green_3";
> gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> - user_green_4 {
> + led-user-green-4 {
> label = "User_green_4";
> gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
> default-state = "off";
> diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
> index d21bcc7c1271..53ac6c2b7b7d 100644
> --- a/arch/arm/boot/dts/stih418-b2199.dts
> +++ b/arch/arm/boot/dts/stih418-b2199.dts
> @@ -26,12 +26,12 @@ aliases {
>
> leds {
> compatible = "gpio-leds";
> - red {
> + led-red {
> label = "Front Panel LED";
> gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
> diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
> index a99604bebf8c..34a518b037ab 100644
> --- a/arch/arm/boot/dts/stih418-b2264.dts
> +++ b/arch/arm/boot/dts/stih418-b2264.dts
> @@ -76,7 +76,7 @@ aliases {
> soc {
> leds {
> compatible = "gpio-leds";
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 2aa94605d3d4..920a0bad7494 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -9,12 +9,12 @@
> / {
> leds {
> compatible = "gpio-leds";
> - red {
> + led-red {
> label = "Front Panel LED";
> gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Thanks
Patrice
next prev parent reply other threads:[~2022-11-28 8:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 14:41 [PATCH] ARM: dts: sti: align LED node names with dtschema Krzysztof Kozlowski
2022-11-28 8:30 ` Patrice CHOTARD [this message]
2022-12-01 17:06 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9cece196-97ed-4d4b-79e0-f34adb785bf4@foss.st.com \
--to=patrice.chotard@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).