Re: [PATCH 9/9] arm64: dts: rockchip: rk3588s-nanopi-m6: rename pcie2 power rail

[Shawn Lin <shawn.lin@rock-chips.com>]

在 2026/10/15 星期四 0:33, Joachim Eastwood via B4 Relay 写道:
> From: Joachim Eastwood <joachim.eastwood@gmail.com>
> 
> vcc3v3_pcie matches the signal name in the schematics, which simplifies
> cross-referencing.
> 

Reviewed-by: Shawn Lin <Shawn.lin@rock-chips.com>


> Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com>
> ---
>   arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi
> index ca115d8e108a..dd61c61fe7d7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi
> @@ -36,13 +36,13 @@ user_led: led-1 {
>   		};
>   	};
>   
> -	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
> +	vcc3v3_pcie: regulator-vcc3v3-pcie {
>   		compatible = "regulator-fixed";
>   		enable-active-high;
>   		gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&pcie20x1_2_con_pwren>;
> -		regulator-name = "vcc_3v3_pcie";
> +		regulator-name = "vcc3v3_pcie";
>   		regulator-min-microvolt = <3300000>;
>   		regulator-max-microvolt = <3300000>;
>   		vin-supply = <&vcc5v0_sys>;
> @@ -95,7 +95,7 @@ &pcie2x1l1 { /* M.2 E-key 2230 */
>   
>   &pcie2x1l2 { /* M.2 M-key 2280 */
>   	pinctrl-0 = <&pcie20x1_2_perstn_m0>, <&pcie20x1m0_clkreqn>, <&pcie20x1m0_waken>;
> -	vpcie3v3-supply = <&vcc_3v3_pcie>;
> +	vpcie3v3-supply = <&vcc3v3_pcie>;
>   };
>   
>   &pinctrl {
>