* [PATCH v2 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support
@ 2024-01-05 20:39 Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible Bryan O'Donoghue
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Bryan O'Donoghue @ 2024-01-05 20:39 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bjorn Andersson, Konrad Dybcio,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Bryan O'Donoghue, Krzysztof Kozlowski
This series adds the yaml, CAMSS and CCI dts definitions for the sc8280xp.
4 x CCI master busses
4 x VFE
4 x VFE Lite
4 x CSID
4 x CSIPHY
Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-24-01-02-sc8280xp-camss-core-dtsi
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
Changes in v2:
- This series depends on "clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC"
in linux-next. - Rob, Krzysztof, dts Robot
- Drops cci_src clock - Konrad
- Adds sc8280xp-cci - Konrad
Link to v1: https://lore.kernel.org/r/20240103-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v1-0-abacaa63a961@linaro.org
Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-24-01-02-sc8280xp-camss-core-dtsi-v2
---
Bryan O'Donoghue (4):
dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 19 +
.../bindings/media/qcom,sc8280xp-camss.yaml | 512 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 555 +++++++++++++++++++++
3 files changed, 1086 insertions(+)
---
base-commit: ab0b3e6ef50d305278b1971891cf1d82ab050b35
change-id: 20240102-linux-next-24-01-02-sc8280xp-camss-core-dtsi-2730a5f7ef98
Best regards,
--
Bryan O'Donoghue <bryan.odonoghue@linaro.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
2024-01-05 20:39 [PATCH v2 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support Bryan O'Donoghue
@ 2024-01-05 20:39 ` Bryan O'Donoghue
2024-01-08 9:45 ` Krzysztof Kozlowski
2024-01-05 20:39 ` [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Bryan O'Donoghue
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Bryan O'Donoghue @ 2024-01-05 20:39 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bjorn Andersson, Konrad Dybcio,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Bryan O'Donoghue
Add sc8280xp compatible consistent with recent CAMSS CCI interfaces.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index 8386cfe21532..369d72882874 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -26,6 +26,7 @@ properties:
- items:
- enum:
- qcom,sc7280-cci
+ - qcom,sc8280xp-cci
- qcom,sdm845-cci
- qcom,sm6350-cci
- qcom,sm8250-cci
@@ -176,6 +177,24 @@ allOf:
- const: cci
- const: cci_src
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-cci
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: slow_ahb_src
+ - const: cpas_ahb
+ - const: cci
+
additionalProperties: false
examples:
--
2.42.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
2024-01-05 20:39 [PATCH v2 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible Bryan O'Donoghue
@ 2024-01-05 20:39 ` Bryan O'Donoghue
2024-01-05 20:42 ` Bryan O'Donoghue
2024-01-05 22:34 ` Rob Herring
2024-01-05 20:39 ` [PATCH v2 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition Bryan O'Donoghue
3 siblings, 2 replies; 8+ messages in thread
From: Bryan O'Donoghue @ 2024-01-05 20:39 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bjorn Andersson, Konrad Dybcio,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Bryan O'Donoghue, Krzysztof Kozlowski
Add bindings for qcom,sc8280xp-camss in order to support the camera
subsystem for sc8280xp as found in the Lenovo x13s Laptop.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/qcom,sc8280xp-camss.yaml | 512 +++++++++++++++++++++
1 file changed, 512 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
new file mode 100644
index 000000000000..c0bc31709873
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
@@ -0,0 +1,512 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc8280xp-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Camera Subsystem (CAMSS)
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-camss
+
+ clocks:
+ maxItems: 40
+
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: cpas_ahb
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: vfe0_axi
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe0_csid
+ - const: vfe1_axi
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe1_csid
+ - const: vfe2_axi
+ - const: vfe2
+ - const: vfe2_cphy_rx
+ - const: vfe2_csid
+ - const: vfe3_axi
+ - const: vfe3
+ - const: vfe3_cphy_rx
+ - const: vfe3_csid
+ - const: vfe_lite0
+ - const: vfe_lite0_cphy_rx
+ - const: vfe_lite0_csid
+ - const: vfe_lite1
+ - const: vfe_lite1_cphy_rx
+ - const: vfe_lite1_csid
+ - const: vfe_lite2
+ - const: vfe_lite2_cphy_rx
+ - const: vfe_lite2_csid
+ - const: vfe_lite3
+ - const: vfe_lite3_cphy_rx
+ - const: vfe_lite3_csid
+ - const: gcc_axi_hf
+ - const: gcc_axi_sf
+
+ interrupts:
+ maxItems: 20
+
+ interrupt-names:
+ items:
+ - const: csid1_lite
+ - const: vfe_lite1
+ - const: csiphy3
+ - const: csid0
+ - const: vfe0
+ - const: csid1
+ - const: vfe1
+ - const: csid0_lite
+ - const: vfe_lite0
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csid2
+ - const: vfe2
+ - const: csid3_lite
+ - const: csid2_lite
+ - const: vfe_lite3
+ - const: vfe_lite2
+ - const: csid3
+ - const: vfe3
+
+ iommus:
+ maxItems: 16
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: cam_ahb
+ - const: cam_hf_mnoc
+ - const: cam_sf_mnoc
+ - const: cam_sf_icp_mnoc
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE3 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: ife2
+ - const: ife3
+ - const: top
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY0.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY1.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY2.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY3.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ reg:
+ maxItems: 20
+
+ reg-names:
+ items:
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy0
+ - const: csiphy1
+ - const: vfe0
+ - const: csid0
+ - const: vfe1
+ - const: csid1
+ - const: vfe2
+ - const: csid2
+ - const: vfe_lite0
+ - const: csid0_lite
+ - const: vfe_lite1
+ - const: csid1_lite
+ - const: vfe_lite2
+ - const: csid2_lite
+ - const: vfe_lite3
+ - const: csid3_lite
+ - const: vfe3
+ - const: csid3
+
+ vdda-phy-supply:
+ description:
+ Phandle to a regulator supply to PHY core block.
+
+ vdda-pll-supply:
+ description:
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interconnects
+ - interconnect-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - reg
+ - reg-names
+ - vdda-phy-supply
+ - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@ac5a000 {
+ compatible = "qcom,sc8280xp-camss";
+
+ reg = <0 0x0ac5a000 0 0x2000>,
+ <0 0x0ac5c000 0 0x2000>,
+ <0 0x0ac65000 0 0x2000>,
+ <0 0x0ac67000 0 0x2000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb3000 0 0x1000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acbd000 0 0x4000>,
+ <0 0x0acc1000 0 0x1000>,
+ <0 0x0acc4000 0 0x4000>,
+ <0 0x0acc8000 0 0x1000>,
+ <0 0x0accb000 0 0x4000>,
+ <0 0x0accf000 0 0x1000>,
+ <0 0x0acd2000 0 0x4000>,
+ <0 0x0acd6000 0 0x1000>,
+ <0 0x0acd9000 0 0x4000>,
+ <0 0x0acdd000 0 0x1000>,
+ <0 0x0ace0000 0 0x4000>,
+ <0 0x0ace4000 0 0x1000>;
+
+ reg-names = "csiphy2",
+ "csiphy3",
+ "csiphy0",
+ "csiphy1",
+ "vfe0",
+ "csid0",
+ "vfe1",
+ "csid1",
+ "vfe2",
+ "csid2",
+ "vfe_lite0",
+ "csid0_lite",
+ "vfe_lite1",
+ "csid1_lite",
+ "vfe_lite2",
+ "csid2_lite",
+ "vfe_lite3",
+ "csid3_lite",
+ "vfe3",
+ "csid3";
+
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "csid1_lite",
+ "vfe_lite1",
+ "csiphy3",
+ "csid0",
+ "vfe0",
+ "csid1",
+ "vfe1",
+ "csid0_lite",
+ "vfe_lite0",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid2",
+ "vfe2",
+ "csid3_lite",
+ "csid2_lite",
+ "vfe_lite3",
+ "vfe_lite2",
+ "csid3",
+ "vfe3";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>,
+ <&camcc IFE_3_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "ife3",
+ "top";
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_3_AXI_CLK>,
+ <&camcc CAMCC_IFE_3_CLK>,
+ <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_3_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>;
+
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe3_axi",
+ "vfe3",
+ "vfe3_cphy_rx",
+ "vfe3_csid",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid",
+ "vfe_lite2",
+ "vfe_lite2_cphy_rx",
+ "vfe_lite2_csid",
+ "vfe_lite3",
+ "vfe_lite3_cphy_rx",
+ "vfe_lite3_csid",
+ "gcc_axi_hf",
+ "gcc_axi_sf";
+
+
+ iommus = <&apps_smmu 0x2000 0x4e0>,
+ <&apps_smmu 0x2020 0x4e0>,
+ <&apps_smmu 0x2040 0x4e0>,
+ <&apps_smmu 0x2060 0x4e0>,
+ <&apps_smmu 0x2080 0x4e0>,
+ <&apps_smmu 0x20e0 0x4e0>,
+ <&apps_smmu 0x20c0 0x4e0>,
+ <&apps_smmu 0x20a0 0x4e0>,
+ <&apps_smmu 0x2400 0x4e0>,
+ <&apps_smmu 0x2420 0x4e0>,
+ <&apps_smmu 0x2440 0x4e0>,
+ <&apps_smmu 0x2460 0x4e0>,
+ <&apps_smmu 0x2480 0x4e0>,
+ <&apps_smmu 0x24e0 0x4e0>,
+ <&apps_smmu 0x24c0 0x4e0>,
+ <&apps_smmu 0x24a0 0x4e0>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_mnoc",
+ "cam_sf_icp_mnoc";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csiphy_ep0: endpoint@0 {
+ reg = <0>;
+ clock-lanes = <7>;
+ data-lanes = <0 1>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
--
2.42.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
2024-01-05 20:39 [PATCH v2 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Bryan O'Donoghue
@ 2024-01-05 20:39 ` Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition Bryan O'Donoghue
3 siblings, 0 replies; 8+ messages in thread
From: Bryan O'Donoghue @ 2024-01-05 20:39 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bjorn Andersson, Konrad Dybcio,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Bryan O'Donoghue
sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
two I2C master controllers for each CCI.
The CCI I2C pins are not muxed so we define them in the dtsi.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 316 +++++++++++++++++++++++++++++++++
1 file changed, 316 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index febf28356ff8..2d7ae19dda3a 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3451,6 +3451,162 @@ usb_1_role_switch: endpoint {
};
};
+ cci0: cci@ac4a000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4a000 0 0x1000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci0_default>;
+ pinctrl-1 = <&cci0_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac4b000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4b000 0 0x1000>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci1_default>;
+ pinctrl-1 = <&cci1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac4c000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4c000 0 0x1000>;
+ interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci2_default>;
+ pinctrl-1 = <&cci2_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci3: cci@ac4d000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4d000 0 0x1000>;
+ interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_3_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci3_default>;
+ pinctrl-1 = <&cci3_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci3_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci3_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc8280xp-camcc";
reg = <0 0x0ad00000 0 0x20000>;
@@ -4076,6 +4232,166 @@ tlmm: pinctrl@f100000 {
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 230>;
wakeup-parent = <&pdc>;
+
+ cci0_default: cci0-default-state {
+ cci0_i2c0_default: cci0-i2c0-default-pins {
+ /* cci_i2c_sda0, cci_i2c_scl0 */
+ pins = "gpio113", "gpio114";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci0_i2c1_default: cci0-i2c1-default-pins {
+ /* cci_i2c_sda1, cci_i2c_scl1 */
+ pins = "gpio115", "gpio116";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci0_sleep: cci0-sleep-state {
+ cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+ /* cci_i2c_sda0, cci_i2c_scl0 */
+ pins = "gpio113", "gpio114";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+
+ cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+ /* cci_i2c_sda1, cci_i2c_scl1 */
+ pins = "gpio115", "gpio116";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+ };
+
+ cci1_default: cci1-default-state {
+ cci1_i2c0_default: cci1-i2c0-default-pins {
+ /* cci_i2c_sda2, cci_i2c_scl2 */
+ pins = "gpio10","gpio11";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_i2c1_default: cci1-i2c1-default-pins {
+ /* cci_i2c_sda3, cci_i2c_scl3 */
+ pins = "gpio123","gpio124";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci1_sleep: cci1-sleep-state {
+ cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+ /* cci_i2c_sda2, cci_i2c_scl2 */
+ pins = "gpio10","gpio11";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+ /* cci_i2c_sda3, cci_i2c_scl3 */
+ pins = "gpio123","gpio124";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci2_default: cci2-default-state {
+ cci2_i2c0_default: cci2-i2c0-default-pins {
+ /* cci_i2c_sda4, cci_i2c_scl4 */
+ pins = "gpio117","gpio118";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci2_i2c1_default: cci2-i2c1-default-pins {
+ /* cci_i2c_sda5, cci_i2c_scl5 */
+ pins = "gpio12","gpio13";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci2_sleep: cci2-sleep-state {
+ cci2_i2c0_sleep: cci2-i2c0-sleep-pins {
+ /* cci_i2c_sda4, cci_i2c_scl4 */
+ pins = "gpio117","gpio118";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci2_i2c1_sleep: cci2-i2c1-sleep-pins {
+ /* cci_i2c_sda5, cci_i2c_scl5 */
+ pins = "gpio12","gpio13";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci3_default: cci3-default-state {
+ cci3_i2c0_default: cci3-i2c0-default-pins {
+ /* cci_i2c_sda6, cci_i2c_scl6 */
+ pins = "gpio145","gpio146";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci3_i2c1_default: cci3-i2c1-default-pins {
+ /* cci_i2c_sda7, cci_i2c_scl7 */
+ pins = "gpio164","gpio165";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci3_sleep: cci3-sleep-state {
+ cci3_i2c0_sleep: cci3-i2c0-sleep-pins {
+ /* cci_i2c_sda6, cci_i2c_scl6 */
+ pins = "gpio145","gpio146";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci3_i2c1_sleep: cci3-i2c1-sleep-pins {
+ /* cci_i2c_sda7, cci_i2c_scl7 */
+ pins = "gpio164","gpio165";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
};
apps_smmu: iommu@15000000 {
--
2.42.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
2024-01-05 20:39 [PATCH v2 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support Bryan O'Donoghue
` (2 preceding siblings ...)
2024-01-05 20:39 ` [PATCH v2 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions Bryan O'Donoghue
@ 2024-01-05 20:39 ` Bryan O'Donoghue
3 siblings, 0 replies; 8+ messages in thread
From: Bryan O'Donoghue @ 2024-01-05 20:39 UTC (permalink / raw)
To: Robert Foss, Todor Tomov, Bjorn Andersson, Konrad Dybcio,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Bryan O'Donoghue
Add CAMSS block definition for sc8280xp.
This drop contains definitions for the following components on sc8280xp:
VFE * 4
VFE Lite * 4
CSID * 4
CSIPHY * 4
This dtsi definition has been developed and validated on a Lenovo X13s
laptop.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 239 +++++++++++++++++++++++++++++++++
1 file changed, 239 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 2d7ae19dda3a..c01679f50899 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3607,6 +3607,245 @@ cci3_i2c1: i2c-bus@1 {
};
};
+ camss: camss@ac5a000 {
+ compatible = "qcom,sc8280xp-camss";
+
+ reg = <0 0x0ac5a000 0 0x2000>,
+ <0 0x0ac5c000 0 0x2000>,
+ <0 0x0ac65000 0 0x2000>,
+ <0 0x0ac67000 0 0x2000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb3000 0 0x1000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acbd000 0 0x4000>,
+ <0 0x0acc1000 0 0x1000>,
+ <0 0x0acc4000 0 0x4000>,
+ <0 0x0acc8000 0 0x1000>,
+ <0 0x0accb000 0 0x4000>,
+ <0 0x0accf000 0 0x1000>,
+ <0 0x0acd2000 0 0x4000>,
+ <0 0x0acd6000 0 0x1000>,
+ <0 0x0acd9000 0 0x4000>,
+ <0 0x0acdd000 0 0x1000>,
+ <0 0x0ace0000 0 0x4000>,
+ <0 0x0ace4000 0 0x1000>;
+
+ reg-names = "csiphy2",
+ "csiphy3",
+ "csiphy0",
+ "csiphy1",
+ "vfe0",
+ "csid0",
+ "vfe1",
+ "csid1",
+ "vfe2",
+ "csid2",
+ "vfe_lite0",
+ "csid0_lite",
+ "vfe_lite1",
+ "csid1_lite",
+ "vfe_lite2",
+ "csid2_lite",
+ "vfe_lite3",
+ "csid3_lite",
+ "vfe3",
+ "csid3";
+
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "csid1_lite",
+ "vfe_lite1",
+ "csiphy3",
+ "csid0",
+ "vfe0",
+ "csid1",
+ "vfe1",
+ "csid0_lite",
+ "vfe_lite0",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid2",
+ "vfe2",
+ "csid3_lite",
+ "csid2_lite",
+ "vfe_lite3",
+ "vfe_lite2",
+ "csid3",
+ "vfe3";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>,
+ <&camcc IFE_3_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "ife3",
+ "top";
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_3_AXI_CLK>,
+ <&camcc CAMCC_IFE_3_CLK>,
+ <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_3_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>;
+
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe3_axi",
+ "vfe3",
+ "vfe3_cphy_rx",
+ "vfe3_csid",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid",
+ "vfe_lite2",
+ "vfe_lite2_cphy_rx",
+ "vfe_lite2_csid",
+ "vfe_lite3",
+ "vfe_lite3_cphy_rx",
+ "vfe_lite3_csid",
+ "gcc_axi_hf",
+ "gcc_axi_sf";
+
+ iommus = <&apps_smmu 0x2000 0x4e0>,
+ <&apps_smmu 0x2020 0x4e0>,
+ <&apps_smmu 0x2040 0x4e0>,
+ <&apps_smmu 0x2060 0x4e0>,
+ <&apps_smmu 0x2080 0x4e0>,
+ <&apps_smmu 0x20e0 0x4e0>,
+ <&apps_smmu 0x20c0 0x4e0>,
+ <&apps_smmu 0x20a0 0x4e0>,
+ <&apps_smmu 0x2400 0x4e0>,
+ <&apps_smmu 0x2420 0x4e0>,
+ <&apps_smmu 0x2440 0x4e0>,
+ <&apps_smmu 0x2460 0x4e0>,
+ <&apps_smmu 0x2480 0x4e0>,
+ <&apps_smmu 0x24e0 0x4e0>,
+ <&apps_smmu 0x24c0 0x4e0>,
+ <&apps_smmu 0x24a0 0x4e0>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_mnoc",
+ "cam_sf_icp_mnoc";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc8280xp-camcc";
reg = <0 0x0ad00000 0 0x20000>;
--
2.42.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
2024-01-05 20:39 ` [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Bryan O'Donoghue
@ 2024-01-05 20:42 ` Bryan O'Donoghue
2024-01-05 22:34 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Bryan O'Donoghue @ 2024-01-05 20:42 UTC (permalink / raw)
To: Bryan O'Donoghue, Robert Foss, Todor Tomov, Bjorn Andersson,
Konrad Dybcio, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel,
Krzysztof Kozlowski
media: dt-bindings: media: camss
doh !
I've just noticed my own typo, please ignore.
---
bod
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
2024-01-05 20:39 ` [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Bryan O'Donoghue
2024-01-05 20:42 ` Bryan O'Donoghue
@ 2024-01-05 22:34 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2024-01-05 22:34 UTC (permalink / raw)
To: Bryan O'Donoghue
Cc: devicetree, linux-kernel, linux-media, linux-arm-msm, Todor Tomov,
Krzysztof Kozlowski, Krzysztof Kozlowski, Konrad Dybcio,
Robert Foss, Bjorn Andersson, Rob Herring, Mauro Carvalho Chehab,
Conor Dooley
On Fri, 05 Jan 2024 20:39:06 +0000, Bryan O'Donoghue wrote:
> Add bindings for qcom,sc8280xp-camss in order to support the camera
> subsystem for sc8280xp as found in the Lenovo x13s Laptop.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/media/qcom,sc8280xp-camss.yaml | 512 +++++++++++++++++++++
> 1 file changed, 512 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.example.dts:26:18: fatal error: dt-bindings/clock/qcom,sc8280xp-camcc.h: No such file or directory
26 | #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1424: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240105-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v2-2-7a57b8b07398@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
2024-01-05 20:39 ` [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible Bryan O'Donoghue
@ 2024-01-08 9:45 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-08 9:45 UTC (permalink / raw)
To: Bryan O'Donoghue, Robert Foss, Todor Tomov, Bjorn Andersson,
Konrad Dybcio, Mauro Carvalho Chehab, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-media, linux-arm-msm, devicetree, linux-kernel
On 05/01/2024 21:39, Bryan O'Donoghue wrote:
> Add sc8280xp compatible consistent with recent CAMSS CCI interfaces.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2024-01-08 9:45 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-05 20:39 [PATCH v2 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible Bryan O'Donoghue
2024-01-08 9:45 ` Krzysztof Kozlowski
2024-01-05 20:39 ` [PATCH v2 2/4] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Bryan O'Donoghue
2024-01-05 20:42 ` Bryan O'Donoghue
2024-01-05 22:34 ` Rob Herring
2024-01-05 20:39 ` [PATCH v2 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions Bryan O'Donoghue
2024-01-05 20:39 ` [PATCH v2 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition Bryan O'Donoghue
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).