From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH v3 0/3] Stingray thermal driver support Date: Thu, 13 Sep 2018 15:25:45 -0700 Message-ID: <9dee54fd-eaef-5454-0c96-d105ba2e221d@gmail.com> References: <1533819299-3401-1-git-send-email-srinath.mannam@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1533819299-3401-1-git-send-email-srinath.mannam@broadcom.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Srinath Mannam , Zhang Rui , Eduardo Valentin , Rob Herring , Mark Rutland Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com List-Id: devicetree@vger.kernel.org On 08/09/18 05:54, Srinath Mannam wrote: > These patches adds the stingray thermal driver and its > corresponding DT nodes with documentation. > > Changes from v2: > - All stingray TMON DT nodes are combine together into single. > Temperature registers are combined into one mem resource. > brcm,tmon-mask parameter has available TMONs mask value. > - All available TMONs are initialized together in single > instance of driver probe call. > > Changes from v1: > - Fixed auto build sparce warning. Thermal maintainers, can you please review patch #3? The binding and DTS changes can go through arm-soc if you would like, or you can take patches 1 and 3 and I take patch 2, either way is fine. Thank you > > Pramod Kumar (3): > dt-bindings: thermal: Add binding document for SR thermal > arm64: dts: stingray: Add Stingray Thermal DT support. > thermal: broadcom: Add Stingray thermal driver > > .../bindings/thermal/brcm,sr-thermal.txt | 23 +++ > .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 13 ++ > drivers/thermal/Kconfig | 3 +- > drivers/thermal/broadcom/Kconfig | 9 + > drivers/thermal/broadcom/Makefile | 1 + > drivers/thermal/broadcom/sr-thermal.c | 216 +++++++++++++++++++++ > 6 files changed, 264 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt > create mode 100644 drivers/thermal/broadcom/sr-thermal.c > -- Florian