[PATCH v2] dt-bindings: can: renesas,rcar-canfd: Fix number of channels for R-Car V3U

[PATCH v2] dt-bindings: can: renesas,rcar-canfd: Fix number of channels for R-Car V3U

[Geert Uytterhoeven]

According to the bindings, only two channels are supported.
However, R-Car V3U supports eight, leading to "make dtbs" failures:

        arch/arm64/boot/dts/renesas/r8a779a0-falcon.dtb: can@e6660000: Unevaluated properties are not allowed ('channel2', 'channel3', 'channel4', 'channel5', 'channel6', 'channel7' were unexpected)

Update the number of channels to 8 on R-Car V3U.
While at it, prevent adding more properties to the channel nodes, as
they must contain no other properties than a status property.

Fixes: d6254d52d70de530 ("dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - s/unevaluatedProperties/additionalProperties/.
---
 .../bindings/net/can/renesas,rcar-canfd.yaml  | 133 ++++++++++--------
 1 file changed, 72 insertions(+), 61 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 6f71fc96bc4e3156..5228fd513ca89a3c 100644
--- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -9,9 +9,6 @@ title: Renesas R-Car CAN FD Controller
 maintainers:
   - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -77,12 +74,13 @@ properties:
     description: Maximum frequency of the CANFD clock.
 
 patternProperties:
-  "^channel[01]$":
+  "^channel[0-7]$":
     type: object
     description:
-      The controller supports two channels and each is represented as a child
-      node.  Each child node supports the "status" property only, which
-      is used to enable/disable the respective channel.
+      The controller supports multiple channels and each is represented as a
+      child node.  Each channel can be enabled/disabled individually.
+
+    additionalProperties: false
 
 required:
   - compatible
@@ -98,60 +96,73 @@ required:
   - channel0
   - channel1
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,rzg2l-canfd
-then:
-  properties:
-    interrupts:
-      items:
-        - description: CAN global error interrupt
-        - description: CAN receive FIFO interrupt
-        - description: CAN0 error interrupt
-        - description: CAN0 transmit interrupt
-        - description: CAN0 transmit/receive FIFO receive completion interrupt
-        - description: CAN1 error interrupt
-        - description: CAN1 transmit interrupt
-        - description: CAN1 transmit/receive FIFO receive completion interrupt
-
-    interrupt-names:
-      items:
-        - const: g_err
-        - const: g_recc
-        - const: ch0_err
-        - const: ch0_rec
-        - const: ch0_trx
-        - const: ch1_err
-        - const: ch1_rec
-        - const: ch1_trx
-
-    resets:
-      maxItems: 2
-
-    reset-names:
-      items:
-        - const: rstp_n
-        - const: rstc_n
-
-  required:
-    - reset-names
-else:
-  properties:
-    interrupts:
-      items:
-        - description: Channel interrupt
-        - description: Global interrupt
-
-    interrupt-names:
-      items:
-        - const: ch_int
-        - const: g_int
-
-    resets:
-      maxItems: 1
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-canfd
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CAN global error interrupt
+            - description: CAN receive FIFO interrupt
+            - description: CAN0 error interrupt
+            - description: CAN0 transmit interrupt
+            - description: CAN0 transmit/receive FIFO receive completion interrupt
+            - description: CAN1 error interrupt
+            - description: CAN1 transmit interrupt
+            - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+        interrupt-names:
+          items:
+            - const: g_err
+            - const: g_recc
+            - const: ch0_err
+            - const: ch0_rec
+            - const: ch0_trx
+            - const: ch1_err
+            - const: ch1_rec
+            - const: ch1_trx
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: rstp_n
+            - const: rstc_n
+
+      required:
+        - reset-names
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Channel interrupt
+            - description: Global interrupt
+
+        interrupt-names:
+          items:
+            - const: ch_int
+            - const: g_int
+
+        resets:
+          maxItems: 1
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,r8a779a0-canfd
+    then:
+      patternProperties:
+        "^channel[2-7]$": false
 
 unevaluatedProperties: false
 
-- 
2.25.1

Re: [PATCH v2] dt-bindings: can: renesas,rcar-canfd: Fix number of channels for R-Car V3U

[Krzysztof Kozlowski]

On 07/12/2022 17:50, Geert Uytterhoeven wrote:
> According to the bindings, only two channels are supported.
> However, R-Car V3U supports eight, leading to "make dtbs" failures:
> 
>         arch/arm64/boot/dts/renesas/r8a779a0-falcon.dtb: can@e6660000: Unevaluated properties are not allowed ('channel2', 'channel3', 'channel4', 'channel5', 'channel6', 'channel7' were unexpected)
> 
> Update the number of channels to 8 on R-Car V3U.
> While at it, prevent adding more properties to the channel nodes, as
> they must contain no other properties than a status property.
> 
> Fixes: d6254d52d70de530 ("dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
>   - s/unevaluatedProperties/additionalProperties/.
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2] dt-bindings: can: renesas,rcar-canfd: Fix number of channels for R-Car V3U

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1064 bytes --]

On 07.12.2022 17:50:21, Geert Uytterhoeven wrote:
> According to the bindings, only two channels are supported.
> However, R-Car V3U supports eight, leading to "make dtbs" failures:
> 
>         arch/arm64/boot/dts/renesas/r8a779a0-falcon.dtb: can@e6660000: Unevaluated properties are not allowed ('channel2', 'channel3', 'channel4', 'channel5', 'channel6', 'channel7' were unexpected)
> 
> Update the number of channels to 8 on R-Car V3U.
> While at it, prevent adding more properties to the channel nodes, as
> they must contain no other properties than a status property.
> 
> Fixes: d6254d52d70de530 ("dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Applied to linux-can-next.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]