* [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings
@ 2023-07-31 10:57 Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml Dmitry Baryshkov
` (13 more replies)
0 siblings, 14 replies; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Reviewing several patchsets for newer platforms made it clear that
having two styles of QMP PHY bindings causes confusion. Despite binding
documents having notes telling that old bindings should be used for
older platforms, it is too easy to attempt adding new platform with
older QMP PHY binding. Thus let's have just a single documented style of
bindings.
Proposed merge strategy: immutable branch with binding and PHY patches,
which can also be merged into Bjorn's dts-for-6.6
Changes since v1:
- Split large patchset into smaller parts
- Rebased on phy/next
Dmitry Baryshkov (13):
dt-bindings: phy: migrate QMP PCIe PHY bindings to
qcom,sc8280xp-qmp-pcie-phy.yaml
phy: qcom-qmp-pcie: simplify clock handling
phy: qcom-qmp-pcie: populate offsets configuration
arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of
bindings
arm64: dts: qcom: ipq8074: switch PCIe QMP PHY to new style of
bindings
arm64: dts: qcom: msm8998: switch PCIe QMP PHY to new style of
bindings
arm64: dts: qcom: sc7280: switch PCIe QMP PHY to new style of bindings
arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of
bindings
arm64: dts: qcom: sdm845: switch PCIe QMP PHY to new style of bindings
arm64: dts: qcom: sm8150: switch PCIe QMP PHY to new style of bindings
arm64: dts: qcom: sm8250: switch PCIe QMP PHY to new style of bindings
arm64: dts: qcom: sm8450: switch PCIe QMP PHY to new style of bindings
ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings
.../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 278 +++---------------
.../phy/qcom,msm8998-qmp-pcie-phy.yaml | 97 ++++++
.../phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 34 ++-
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 31 +-
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 32 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 63 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 30 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 +--
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 140 ++++-----
arch/arm64/boot/dts/qcom/sdm845.dtsi | 71 ++---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 70 ++---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 112 +++----
arch/arm64/boot/dts/qcom/sm8450.dtsi | 82 +++---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 162 +++++-----
14 files changed, 520 insertions(+), 718 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
--
2.39.2
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-08-19 13:31 ` Krzysztof Kozlowski
2023-07-31 10:57 ` [PATCH v2 02/13] phy: qcom-qmp-pcie: simplify clock handling Dmitry Baryshkov
` (12 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Migrate legacy bindings (described in qcom,ipq8074-qmp-pcie-phy.yaml)
to qcom,sc8280xp-qmp-pcie-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 278 +++---------------
.../phy/qcom,msm8998-qmp-pcie-phy.yaml | 97 ++++++
.../phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 34 ++-
3 files changed, 163 insertions(+), 246 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 3d42ee3901a1..5073007267ad 100644
--- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -13,287 +13,79 @@ description:
QMP PHY controller supports physical layer functionality for a number of
controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
- Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
- qcom,sc8280xp-qmp-pcie-phy.yaml.
-
properties:
compatible:
enum:
- qcom,ipq6018-qmp-pcie-phy
- qcom,ipq8074-qmp-gen3-pcie-phy
- qcom,ipq8074-qmp-pcie-phy
- - qcom,msm8998-qmp-pcie-phy
- - qcom,sc8180x-qmp-pcie-phy
- - qcom,sdm845-qhp-pcie-phy
- - qcom,sdm845-qmp-pcie-phy
- - qcom,sdx55-qmp-pcie-phy
- - qcom,sm8250-qmp-gen3x1-pcie-phy
- - qcom,sm8250-qmp-gen3x2-pcie-phy
- - qcom,sm8250-qmp-modem-pcie-phy
- - qcom,sm8450-qmp-gen3x1-pcie-phy
- - qcom,sm8450-qmp-gen4x2-pcie-phy
reg:
items:
- description: serdes
- "#address-cells":
- enum: [ 1, 2 ]
-
- "#size-cells":
- enum: [ 1, 2 ]
-
- ranges: true
-
clocks:
- minItems: 2
- maxItems: 4
+ maxItems: 3
clock-names:
- minItems: 2
- maxItems: 4
+ items:
+ - const: aux
+ - const: cfg_ahb
+ - const: pipe
resets:
- minItems: 1
maxItems: 2
reset-names:
- minItems: 1
- maxItems: 2
-
- vdda-phy-supply: true
-
- vdda-pll-supply: true
-
- vddp-ref-clk-supply: true
-
-patternProperties:
- "^phy@[0-9a-f]+$":
- type: object
- description: single PHY-provider child node
- properties:
- reg:
- minItems: 3
- maxItems: 6
-
- clocks:
- items:
- - description: PIPE clock
-
- clock-names:
- deprecated: true
- items:
- - const: pipe0
-
- "#clock-cells":
- const: 0
-
- clock-output-names:
- maxItems: 1
+ items:
+ - const: phy
+ - const: common
- "#phy-cells":
- const: 0
+ "#clock-cells":
+ const: 0
- required:
- - reg
- - clocks
- - "#clock-cells"
- - clock-output-names
- - "#phy-cells"
+ clock-output-names:
+ maxItems: 1
- additionalProperties: false
+ "#phy-cells":
+ const: 0
required:
- compatible
- reg
- - "#address-cells"
- - "#size-cells"
- - ranges
- clocks
- clock-names
- resets
- reset-names
+ - "#clock-cells"
+ - clock-output-names
+ - "#phy-cells"
additionalProperties: false
-allOf:
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,msm8998-qmp-pcie-phy
- then:
- properties:
- clocks:
- maxItems: 3
- clock-names:
- items:
- - const: aux
- - const: cfg_ahb
- - const: ref
- resets:
- maxItems: 2
- reset-names:
- items:
- - const: phy
- - const: common
- required:
- - vdda-phy-supply
- - vdda-pll-supply
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,ipq6018-qmp-pcie-phy
- - qcom,ipq8074-qmp-gen3-pcie-phy
- - qcom,ipq8074-qmp-pcie-phy
- then:
- properties:
- clocks:
- maxItems: 2
- clock-names:
- items:
- - const: aux
- - const: cfg_ahb
- resets:
- maxItems: 2
- reset-names:
- items:
- - const: phy
- - const: common
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc8180x-qmp-pcie-phy
- - qcom,sdm845-qhp-pcie-phy
- - qcom,sdm845-qmp-pcie-phy
- - qcom,sdx55-qmp-pcie-phy
- - qcom,sm8250-qmp-gen3x1-pcie-phy
- - qcom,sm8250-qmp-gen3x2-pcie-phy
- - qcom,sm8250-qmp-modem-pcie-phy
- - qcom,sm8450-qmp-gen3x1-pcie-phy
- - qcom,sm8450-qmp-gen4x2-pcie-phy
- then:
- properties:
- clocks:
- maxItems: 4
- clock-names:
- items:
- - const: aux
- - const: cfg_ahb
- - const: ref
- - const: refgen
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: phy
- required:
- - vdda-phy-supply
- - vdda-pll-supply
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc8180x-qmp-pcie-phy
- - qcom,sm8250-qmp-gen3x2-pcie-phy
- - qcom,sm8250-qmp-modem-pcie-phy
- - qcom,sm8450-qmp-gen4x2-pcie-phy
- then:
- patternProperties:
- "^phy@[0-9a-f]+$":
- properties:
- reg:
- items:
- - description: TX lane 1
- - description: RX lane 1
- - description: PCS
- - description: TX lane 2
- - description: RX lane 2
- - description: PCS_MISC
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sdm845-qmp-pcie-phy
- - qcom,sdx55-qmp-pcie-phy
- - qcom,sm8250-qmp-gen3x1-pcie-phy
- - qcom,sm8450-qmp-gen3x1-pcie-phy
- then:
- patternProperties:
- "^phy@[0-9a-f]+$":
- properties:
- reg:
- items:
- - description: TX
- - description: RX
- - description: PCS
- - description: PCS_MISC
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,ipq6018-qmp-pcie-phy
- - qcom,ipq8074-qmp-pcie-phy
- - qcom,msm8998-qmp-pcie-phy
- - qcom,sdm845-qhp-pcie-phy
- then:
- patternProperties:
- "^phy@[0-9a-f]+$":
- properties:
- reg:
- items:
- - description: TX
- - description: RX
- - description: PCS
-
examples:
- |
- #include <dt-bindings/clock/qcom,gcc-sm8250.h>
- phy-wrapper@1c0e000 {
- compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
- reg = <0x01c0e000 0x1c0>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x01c0e000 0x1000>;
-
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
-
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "phy";
+ #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+ #include <dt-bindings/reset/qcom,gcc-ipq6018.h>
- vdda-phy-supply = <&vreg_l10c_0p88>;
- vdda-pll-supply = <&vreg_l6b_1p2>;
+ phy@84000 {
+ compatible = "qcom,ipq6018-qmp-pcie-phy";
+ reg = <0x0 0x00084000 0x0 0x1000>;
- phy@200 {
- reg = <0x200 0x170>,
- <0x400 0x200>,
- <0xa00 0x1f0>,
- <0x600 0x170>,
- <0x800 0x200>,
- <0xe00 0xf4>;
+ clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "pipe";
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-output-names = "gcc_pcie0_pipe_clk_src";
+ #clock-cells = <0>;
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
+ #phy-cells = <0>;
- #phy-cells = <0>;
- };
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
};
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
new file mode 100644
index 000000000000..d05eef0e1ccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, MSM8998)
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description:
+ The QMP PHY controller supports physical layer functionality for a number of
+ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+ compatible:
+ const: qcom,msm8998-qmp-pcie-phy
+
+ reg:
+ items:
+ - description: serdes
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: aux
+ - const: cfg_ahb
+ - const: ref
+ - const: pipe
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: phy
+ - const: common
+
+ vdda-phy-supply: true
+
+ vdda-pll-supply: true
+
+ "#clock-cells":
+ const: 0
+
+ clock-output-names:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - vdda-phy-supply
+ - vdda-pll-supply
+ - "#clock-cells"
+ - clock-output-names
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+ phy@1c18000 {
+ compatible = "qcom,msm8998-qmp-pcie-phy";
+ reg = <0x01c06000 0x1000>;
+
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk_src";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index ca55ed9d74ac..a2c894a33c1c 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -18,11 +18,21 @@ properties:
enum:
- qcom,sa8775p-qmp-gen4x2-pcie-phy
- qcom,sa8775p-qmp-gen4x4-pcie-phy
+ - qcom,sc8180x-qmp-pcie-phy
- qcom,sc8280xp-qmp-gen3x1-pcie-phy
- qcom,sc8280xp-qmp-gen3x2-pcie-phy
- qcom,sc8280xp-qmp-gen3x4-pcie-phy
+ - qcom,sdm845-qhp-pcie-phy
+ - qcom,sdm845-qmp-pcie-phy
+ - qcom,sdx55-qmp-pcie-phy
- qcom,sdx65-qmp-gen4x2-pcie-phy
+ - qcom,sm8150-qmp-gen3x1-pcie-phy
+ - qcom,sm8250-qmp-gen3x1-pcie-phy
+ - qcom,sm8250-qmp-gen3x2-pcie-phy
+ - qcom,sm8250-qmp-modem-pcie-phy
- qcom,sm8350-qmp-gen3x1-pcie-phy
+ - qcom,sm8450-qmp-gen3x1-pcie-phy
+ - qcom,sm8450-qmp-gen4x2-pcie-phy
- qcom,sm8550-qmp-gen3x2-pcie-phy
- qcom,sm8550-qmp-gen4x2-pcie-phy
@@ -40,7 +50,7 @@ properties:
- const: aux
- const: cfg_ahb
- const: ref
- - const: rchng
+ - enum: [rchng, refgen]
- const: pipe
- const: pipediv2
- const: phy_aux
@@ -87,7 +97,6 @@ required:
- reg
- clocks
- clock-names
- - power-domains
- resets
- reset-names
- vdda-phy-supply
@@ -123,7 +132,17 @@ allOf:
compatible:
contains:
enum:
+ - qcom,sc8180x-qmp-pcie-phy
+ - qcom,sdm845-qhp-pcie-phy
+ - qcom,sdm845-qmp-pcie-phy
+ - qcom,sdx55-qmp-pcie-phy
+ - qcom,sm8150-qmp-gen3x1-pcie-phy
+ - qcom,sm8250-qmp-gen3x1-pcie-phy
+ - qcom,sm8250-qmp-gen3x2-pcie-phy
+ - qcom,sm8250-qmp-modem-pcie-phy
- qcom,sm8350-qmp-gen3x1-pcie-phy
+ - qcom,sm8450-qmp-gen3x1-pcie-phy
+ - qcom,sm8450-qmp-gen3x2-pcie-phy
- qcom,sm8550-qmp-gen3x2-pcie-phy
- qcom,sm8550-qmp-gen4x2-pcie-phy
then:
@@ -132,7 +151,16 @@ allOf:
maxItems: 5
clock-names:
maxItems: 5
- else:
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-qmp-gen3x1-pcie-phy
+ - qcom,sc8280xp-qmp-gen3x2-pcie-phy
+ - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+ then:
properties:
clocks:
minItems: 6
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 02/13] phy: qcom-qmp-pcie: simplify clock handling
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 12:56 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 03/13] phy: qcom-qmp-pcie: populate offsets configuration Dmitry Baryshkov
` (11 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
For some of existing PHYs for new binding we are going to change refgen
to more correct "rchng". Rather than introducing additional code
to handle legacy vs current bindings (and clock names), use
devm_clk_bulk_get_optional().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 78 +++---------------------
1 file changed, 7 insertions(+), 71 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index e15ea113b2db..f3717cb4a0e1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2194,9 +2194,6 @@ struct qmp_phy_cfg {
const struct qmp_phy_init_tbl *serdes_4ln_tbl;
int serdes_4ln_num;
- /* clock ids to be requested */
- const char * const *clk_list;
- int num_clks;
/* resets to be requested */
const char * const *reset_list;
int num_resets;
@@ -2275,24 +2272,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
}
/* list of clocks required by phy */
-static const char * const ipq8074_pciephy_clk_l[] = {
- "aux", "cfg_ahb",
-};
-
-static const char * const msm8996_phy_clk_l[] = {
- "aux", "cfg_ahb", "ref",
-};
-
-static const char * const sc8280xp_pciephy_clk_l[] = {
- "aux", "cfg_ahb", "ref", "rchng",
-};
-
-static const char * const sdm845_pciephy_clk_l[] = {
- "aux", "cfg_ahb", "ref", "refgen",
-};
-
-static const char * const sa8775p_pciephy_clk_l[] = {
- "aux", "cfg_ahb", "ref", "rchng", "phy_aux",
+static const char * const qmp_pciephy_clk_l[] = {
+ "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
};
/* list of regulators */
@@ -2368,8 +2349,6 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.pcs = ipq8074_pcie_pcs_tbl,
.pcs_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
},
- .clk_list = ipq8074_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
.reset_list = ipq8074_pciephy_reset_l,
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
@@ -2395,8 +2374,6 @@ static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
.pcs_misc = ipq8074_pcie_gen3_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_misc_tbl),
},
- .clk_list = ipq8074_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
.reset_list = ipq8074_pciephy_reset_l,
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
@@ -2424,8 +2401,6 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
.pcs_misc = ipq6018_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(ipq6018_pcie_pcs_misc_tbl),
},
- .clk_list = ipq8074_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
.reset_list = ipq8074_pciephy_reset_l,
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
@@ -2451,8 +2426,6 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
.pcs_misc = sdm845_qmp_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2474,8 +2447,6 @@ static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
.pcs = sdm845_qhp_pcie_pcs_tbl,
.pcs_num = ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2511,8 +2482,6 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
.pcs_misc = sm8250_qmp_gen3x1_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2548,8 +2517,6 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
.pcs_misc = sm8250_qmp_gen3x2_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2573,8 +2540,6 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.pcs = msm8998_pcie_pcs_tbl,
.pcs_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
},
- .clk_list = msm8996_phy_clk_l,
- .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
.reset_list = ipq8074_pciephy_reset_l,
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2602,8 +2567,6 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
.pcs_misc = sc8180x_qmp_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(sc8180x_qmp_pcie_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2637,8 +2600,6 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x1_pciephy_cfg = {
.serdes_num = ARRAY_SIZE(sc8280xp_qmp_gen3x1_pcie_rc_serdes_tbl),
},
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2672,8 +2633,6 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x2_pciephy_cfg = {
.serdes_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_rc_serdes_tbl),
},
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2710,8 +2669,6 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x4_pciephy_cfg = {
.serdes_4ln_tbl = sc8280xp_qmp_gen3x4_pcie_serdes_4ln_tbl,
.serdes_4ln_num = ARRAY_SIZE(sc8280xp_qmp_gen3x4_pcie_serdes_4ln_tbl),
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2752,8 +2709,6 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
.pcs_misc_num = ARRAY_SIZE(sdx55_qmp_pcie_ep_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2789,8 +2744,6 @@ static const struct qmp_phy_cfg sm8350_qmp_gen3x1_pciephy_cfg = {
.rx_num = ARRAY_SIZE(sm8350_qmp_gen3x1_pcie_rc_rx_tbl),
},
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2826,8 +2779,6 @@ static const struct qmp_phy_cfg sm8350_qmp_gen3x2_pciephy_cfg = {
.pcs_num = ARRAY_SIZE(sm8350_qmp_gen3x2_pcie_rc_pcs_tbl),
},
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2855,8 +2806,6 @@ static const struct qmp_phy_cfg sdx65_qmp_pciephy_cfg = {
.pcs_misc = sdx65_qmp_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(sdx65_qmp_pcie_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2890,8 +2839,6 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
.rx_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rc_rx_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2932,8 +2879,6 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
.pcs_misc_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl),
},
- .clk_list = sdm845_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2961,8 +2906,6 @@ static const struct qmp_phy_cfg sm8550_qmp_gen3x2_pciephy_cfg = {
.pcs_misc = sm8550_qmp_gen3x2_pcie_pcs_misc_tbl,
.pcs_misc_num = ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_misc_tbl),
},
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -2992,8 +2935,6 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.ln_shrd = sm8550_qmp_gen4x2_pcie_ln_shrd_tbl,
.ln_shrd_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_ln_shrd_tbl),
},
- .clk_list = sc8280xp_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = sm8550_qmp_phy_vreg_l,
@@ -3029,8 +2970,6 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
.pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
},
- .clk_list = sa8775p_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sa8775p_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -3065,8 +3004,6 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x4_pciephy_cfg = {
.pcs_misc_num = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
},
- .clk_list = sa8775p_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(sa8775p_pciephy_clk_l),
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
@@ -3189,7 +3126,7 @@ static int qmp_pcie_init(struct phy *phy)
goto err_assert_reset;
}
- ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(qmp_pciephy_clk_l), qmp->clks);
if (ret)
goto err_assert_reset;
@@ -3210,7 +3147,7 @@ static int qmp_pcie_exit(struct phy *phy)
reset_control_bulk_assert(cfg->num_resets, qmp->resets);
- clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+ clk_bulk_disable_unprepare(ARRAY_SIZE(qmp_pciephy_clk_l), qmp->clks);
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
@@ -3393,9 +3330,8 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp)
static int qmp_pcie_clk_init(struct qmp_pcie *qmp)
{
- const struct qmp_phy_cfg *cfg = qmp->cfg;
struct device *dev = qmp->dev;
- int num = cfg->num_clks;
+ int num = ARRAY_SIZE(qmp_pciephy_clk_l);
int i;
qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
@@ -3403,9 +3339,9 @@ static int qmp_pcie_clk_init(struct qmp_pcie *qmp)
return -ENOMEM;
for (i = 0; i < num; i++)
- qmp->clks[i].id = cfg->clk_list[i];
+ qmp->clks[i].id = qmp_pciephy_clk_l[i];
- return devm_clk_bulk_get(dev, num, qmp->clks);
+ return devm_clk_bulk_get_optional(dev, num, qmp->clks);
}
static void phy_clk_release_provider(void *res)
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 03/13] phy: qcom-qmp-pcie: populate offsets configuration
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 02/13] phy: qcom-qmp-pcie: simplify clock handling Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 04/13] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings Dmitry Baryshkov
` (10 subsequent siblings)
13 siblings, 0 replies; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Populate offsets configuration for the rest of UFS PHYs to make it
possible to switch them to the new (single-node) bindings style.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 84 ++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index f3717cb4a0e1..f304a2c4a5c2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2294,6 +2294,56 @@ static const char * const sdm845_pciephy_reset_l[] = {
"phy",
};
+static const struct qmp_pcie_offsets qmp_pcie_offsets_qhp = {
+ .serdes = 0,
+ .pcs = 0x1800,
+ .tx = 0x0800,
+ /* no .rx for QHP */
+};
+
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v2 = {
+ .serdes = 0,
+ .pcs = 0x0800,
+ .tx = 0x0200,
+ .rx = 0x0400,
+};
+
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v3 = {
+ .serdes = 0,
+ .pcs = 0x0800,
+ .pcs_misc = 0x0600,
+ .tx = 0x0200,
+ .rx = 0x0400,
+};
+
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x1 = {
+ .serdes = 0,
+ .pcs = 0x0800,
+ .pcs_misc = 0x0c00,
+ .tx = 0x0200,
+ .rx = 0x0400,
+};
+
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x2 = {
+ .serdes = 0,
+ .pcs = 0x0a00,
+ .pcs_misc = 0x0e00,
+ .tx = 0x0200,
+ .rx = 0x0400,
+ .tx2 = 0x0600,
+ .rx2 = 0x0800,
+};
+
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v4_20 = {
+ .serdes = 0x1000,
+ .pcs = 0x1200,
+ .pcs_misc = 0x1600,
+ .tx = 0x0000,
+ .rx = 0x0200,
+ .tx2 = 0x0800,
+ .rx2 = 0x0a00,
+};
+
static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = {
.serdes = 0,
.pcs = 0x0200,
@@ -2304,6 +2354,16 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = {
.rx2 = 0x1800,
};
+static const struct qmp_pcie_offsets qmp_pcie_offsets_v5_20 = {
+ .serdes = 0x1000,
+ .pcs = 0x1200,
+ .pcs_misc = 0x1400,
+ .tx = 0x0000,
+ .rx = 0x0200,
+ .tx2 = 0x0800,
+ .rx2 = 0x0a00,
+};
+
static const struct qmp_pcie_offsets qmp_pcie_offsets_v6_20 = {
.serdes = 0x1000,
.pcs = 0x1200,
@@ -2339,6 +2399,8 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5_30 = {
static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v2,
+
.tbls = {
.serdes = ipq8074_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
@@ -2362,6 +2424,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v4x1,
+
.tbls = {
.serdes = ipq8074_pcie_gen3_serdes_tbl,
.serdes_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl),
@@ -2389,6 +2453,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v4x1,
+
.tbls = {
.serdes = ipq6018_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
@@ -2414,6 +2480,8 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v3,
+
.tbls = {
.serdes = sdm845_qmp_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
@@ -2439,6 +2507,8 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_qhp,
+
.tbls = {
.serdes = sdm845_qhp_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
@@ -2460,6 +2530,8 @@ static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v4x1,
+
.tbls = {
.serdes = sm8250_qmp_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
@@ -2495,6 +2567,8 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
.lanes = 2,
+ .offsets = &qmp_pcie_offsets_v4x2,
+
.tbls = {
.serdes = sm8250_qmp_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
@@ -2530,6 +2604,8 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v3,
+
.tbls = {
.serdes = msm8998_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
@@ -2555,6 +2631,8 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
.lanes = 2,
+ .offsets = &qmp_pcie_offsets_v4x2,
+
.tbls = {
.serdes = sc8180x_qmp_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
@@ -2682,6 +2760,8 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x4_pciephy_cfg = {
static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
.lanes = 2,
+ .offsets = &qmp_pcie_offsets_v4_20,
+
.tbls = {
.serdes = sdx55_qmp_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
@@ -2819,6 +2899,8 @@ static const struct qmp_phy_cfg sdx65_qmp_pciephy_cfg = {
static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
.lanes = 1,
+ .offsets = &qmp_pcie_offsets_v5,
+
.tbls = {
.serdes = sm8450_qmp_gen3_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_serdes_tbl),
@@ -2852,6 +2934,8 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
.lanes = 2,
+ .offsets = &qmp_pcie_offsets_v5_20,
+
.tbls = {
.serdes = sm8450_qmp_gen4x2_pcie_serdes_tbl,
.serdes_num = ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_serdes_tbl),
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 04/13] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (2 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 03/13] phy: qcom-qmp-pcie: populate offsets configuration Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:21 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 05/13] arm64: dts: qcom: ipq8074: " Dmitry Baryshkov
` (9 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 32 ++++++++++-----------------
1 file changed, 12 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 47b8b1d6730a..3c8a2f4e26a3 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -278,33 +278,25 @@ qusb_phy_0: qusb@79000 {
pcie_phy: phy@84000 {
compatible = "qcom,ipq6018-qmp-pcie-phy";
- reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+ reg = <0x0 0x00084000 0x0 0x1000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_PCIE0_AUX_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>;
- clock-names = "aux", "cfg_ahb";
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "pipe";
+
+ clock-output-names = "gcc_pcie0_pipe_clk_src";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy",
"common";
-
- pcie_phy0: phy@84200 {
- reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
- <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
- <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
- <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "gcc_pcie0_pipe_clk_src";
- #clock-cells = <0>;
- };
};
mdio: mdio@90000 {
@@ -756,7 +748,7 @@ pcie0: pci@20000000 {
#address-cells = <3>;
#size-cells = <2>;
- phys = <&pcie_phy0>;
+ phys = <&pcie_phy>;
phy-names = "pciephy";
ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 05/13] arm64: dts: qcom: ipq8074: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (3 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 04/13] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:22 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 06/13] arm64: dts: qcom: msm8998: " Dmitry Baryshkov
` (8 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 63 +++++++++++----------------
1 file changed, 26 insertions(+), 37 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 00ed71936b47..e4447a9d7929 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -211,59 +211,48 @@ qusb_phy_0: phy@79000 {
pcie_qmp0: phy@84000 {
compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
- reg = <0x00084000 0x1bc>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00084000 0x1000>;
clocks = <&gcc GCC_PCIE0_AUX_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>;
- clock-names = "aux", "cfg_ahb";
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "pipe";
+
+ clock-output-names = "pcie20_phy0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
-
- pcie_phy0: phy@84200 {
- reg = <0x84200 0x16c>,
- <0x84400 0x200>,
- <0x84800 0x1f0>,
- <0x84c00 0xf4>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "pcie20_phy0_pipe_clk";
- };
};
pcie_qmp1: phy@8e000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
- reg = <0x0008e000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x0008e000 0x1000>;
clocks = <&gcc GCC_PCIE1_AUX_CLK>,
- <&gcc GCC_PCIE1_AHB_CLK>;
- clock-names = "aux", "cfg_ahb";
+ <&gcc GCC_PCIE1_AHB_CLK>,
+ <&gcc GCC_PCIE1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "pipe";
+
+ clock-output-names = "pcie20_phy1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
resets = <&gcc GCC_PCIE1_PHY_BCR>,
<&gcc GCC_PCIE1PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
-
- pcie_phy1: phy@8e200 {
- reg = <0x8e200 0x130>,
- <0x8e400 0x200>,
- <0x8e800 0x1f8>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "pcie20_phy1_pipe_clk";
- };
};
mdio: mdio@90000 {
@@ -807,7 +796,7 @@ pcie1: pci@10000000 {
#address-cells = <3>;
#size-cells = <2>;
- phys = <&pcie_phy1>;
+ phys = <&pcie_qmp1>;
phy-names = "pciephy";
ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */
@@ -869,7 +858,7 @@ pcie0: pci@20000000 {
#address-cells = <3>;
#size-cells = <2>;
- phys = <&pcie_phy0>;
+ phys = <&pcie_qmp0>;
phy-names = "pciephy";
ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 06/13] arm64: dts: qcom: msm8998: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (4 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 05/13] arm64: dts: qcom: ipq8074: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:24 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 07/13] arm64: dts: qcom: sc7280: " Dmitry Baryshkov
` (7 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 30 ++++++++++++---------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index d0af22fa63f2..94921e75f8c2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -926,7 +926,7 @@ pcie0: pci@1c00000 {
#address-cells = <3>;
#size-cells = <2>;
num-lanes = <1>;
- phys = <&pciephy>;
+ phys = <&pcie_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -956,32 +956,28 @@ pcie0: pci@1c00000 {
pcie_phy: phy@1c06000 {
compatible = "qcom,msm8998-qmp-pcie-phy";
- reg = <0x01c06000 0x18c>;
- #address-cells = <1>;
- #size-cells = <1>;
+ reg = <0x01c06000 0x1000>;
status = "disabled";
- ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_PCIE_CLKREF_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk_src";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
reset-names = "phy", "common";
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
-
- pciephy: phy@1c06800 {
- reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "pcie_0_pipe_clk_src";
- #clock-cells = <0>;
- };
};
ufshc: ufshc@1da4000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 07/13] arm64: dts: qcom: sc7280: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (5 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 06/13] arm64: dts: qcom: msm8998: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:25 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 08/13] arm64: dts: qcom: sc8180x: " Dmitry Baryshkov
` (6 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ++++++++++------------------
1 file changed, 12 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 4353f7265877..670092731c6c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -869,7 +869,7 @@ gcc: clock-controller@100000 {
reg = <0 0x00100000 0 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
- <0>, <&pcie1_lane>,
+ <0>, <&pcie1_phy>,
<0>, <0>, <0>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
@@ -2121,7 +2121,7 @@ pcie1: pci@1c08000 {
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
- <&pcie1_lane>,
+ <&pcie1_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2155,7 +2155,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc GCC_PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
pinctrl-names = "default";
@@ -2171,15 +2171,18 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
- reg = <0 0x01c0e000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x1000>;
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_EN>,
- <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen", "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2188,21 +2191,6 @@ pcie1_phy: phy@1c0e000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e200 {
- reg = <0 0x01c0e200 0 0x170>,
- <0 0x01c0e400 0 0x200>,
- <0 0x01c0ea00 0 0x1f0>,
- <0 0x01c0e600 0 0x170>,
- <0 0x01c0e800 0 0x200>,
- <0 0x01c0ee00 0 0xf4>;
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
ipa: ipa@1e40000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 08/13] arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (6 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 07/13] arm64: dts: qcom: sc7280: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:26 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 09/13] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
` (5 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 140 ++++++++++----------------
1 file changed, 51 insertions(+), 89 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 486f7ffef43b..fae149e33b98 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -1749,7 +1749,7 @@ pcie0: pci@1c00000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -1757,15 +1757,20 @@ pcie0: pci@1c00000 {
pcie0_phy: phy-wrapper@1c06000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c06000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x1c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1774,21 +1779,6 @@ pcie0_phy: phy-wrapper@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x1c06200 0 0x170>, /* tx0 */
- <0 0x1c06400 0 0x200>, /* rx0 */
- <0 0x1c06a00 0 0x1f0>, /* pcs */
- <0 0x1c06600 0 0x170>, /* tx1 */
- <0 0x1c06800 0 0x200>, /* rx1 */
- <0 0x1c06e00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- #phy-cells = <0>;
- };
};
pcie3: pci@1c08000 {
@@ -1856,7 +1846,7 @@ pcie3: pci@1c08000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie3_lane>;
+ phys = <&pcie3_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -1864,15 +1854,21 @@ pcie3: pci@1c08000 {
pcie3_phy: phy-wrapper@1c0c000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c0c000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x1c0c000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_3_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3_CLKREF_CLK>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_3_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_3_pipe_clk";
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_3_PHY_BCR>;
reset-names = "phy";
@@ -1881,21 +1877,6 @@ pcie3_phy: phy-wrapper@1c0c000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie3_lane: phy@1c0c200 {
- reg = <0 0x1c0c200 0 0x170>, /* tx0 */
- <0 0x1c0c400 0 0x200>, /* rx0 */
- <0 0x1c0ca00 0 0x1f0>, /* pcs */
- <0 0x1c0c600 0 0x170>, /* tx1 */
- <0 0x1c0c800 0 0x200>, /* rx1 */
- <0 0x1c0ce00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_3_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_3_pipe_clk";
- #phy-cells = <0>;
- };
};
pcie1: pci@1c10000 {
@@ -1963,7 +1944,7 @@ pcie1: pci@1c10000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -1971,15 +1952,21 @@ pcie1: pci@1c10000 {
pcie1_phy: phy-wrapper@1c16000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c16000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x1c16000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -1988,21 +1975,6 @@ pcie1_phy: phy-wrapper@1c16000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e200 {
- reg = <0 0x1c16200 0 0x170>, /* tx0 */
- <0 0x1c16400 0 0x200>, /* rx0 */
- <0 0x1c16a00 0 0x1f0>, /* pcs */
- <0 0x1c16600 0 0x170>, /* tx1 */
- <0 0x1c16800 0 0x200>, /* rx1 */
- <0 0x1c16e00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
-
- #phy-cells = <0>;
- };
};
pcie2: pci@1c18000 {
@@ -2070,7 +2042,7 @@ pcie2: pci@1c18000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie2_lane>;
+ phys = <&pcie2_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -2078,15 +2050,21 @@ pcie2: pci@1c18000 {
pcie2_phy: phy-wrapper@1c1c000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c1c000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x1c1c000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2_CLKREF_CLK>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_3_pipe_clk";
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "phy";
@@ -2095,22 +2073,6 @@ pcie2_phy: phy-wrapper@1c1c000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie2_lane: phy@1c0e200 {
- reg = <0 0x1c1c200 0 0x170>, /* tx0 */
- <0 0x1c1c400 0 0x200>, /* rx0 */
- <0 0x1c1ca00 0 0x1f0>, /* pcs */
- <0 0x1c1c600 0 0x170>, /* tx1 */
- <0 0x1c1c800 0 0x200>, /* rx1 */
- <0 0x1c1ce00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_2_pipe_clk";
-
- #phy-cells = <0>;
- };
};
ufs_mem_hc: ufshc@1d84000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 09/13] arm64: dts: qcom: sdm845: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (7 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 08/13] arm64: dts: qcom: sc8180x: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:26 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 10/13] arm64: dts: qcom: sm8150: " Dmitry Baryshkov
` (4 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 71 ++++++++++++----------------
1 file changed, 30 insertions(+), 41 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 3d4050548f3a..ef7b6994fdab 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1198,8 +1198,8 @@ gcc: clock-controller@100000 {
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>,
- <&pcie0_lane>,
- <&pcie1_lane>;
+ <&pcie0_phy>,
+ <&pcie1_phy>;
clock-names = "bi_tcxo",
"bi_tcxo_ao",
"sleep_clk",
@@ -2371,7 +2371,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -2379,15 +2379,22 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sdm845-qmp-pcie-phy";
- reg = <0 0x01c06000 0 0x18c>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -2396,19 +2403,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06200 0 0x128>,
- <0 0x01c06400 0 0x1fc>,
- <0 0x01c06800 0 0x218>,
- <0 0x01c06600 0 0x70>;
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -2481,7 +2475,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -2489,15 +2483,22 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0a000 {
compatible = "qcom,sdm845-qhp-pcie-phy";
- reg = <0 0x01c0a000 0 0x800>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0a000 0 0x2000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2506,18 +2507,6 @@ pcie1_phy: phy@1c0a000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c06200 {
- reg = <0 0x01c0a800 0 0x800>,
- <0 0x01c0a800 0 0x800>,
- <0 0x01c0b800 0 0x400>;
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
mem_noc: interconnect@1380000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 10/13] arm64: dts: qcom: sm8150: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (8 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 09/13] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:27 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 11/13] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
` (3 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes). As a part of this conversion also
add the missing "ref" clock to the PCIe PHY devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 70 ++++++++++++----------------
1 file changed, 30 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 4381527da3fb..2baac91aecfb 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1874,7 +1874,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
@@ -1888,14 +1888,22 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
- reg = <0 0x01c06000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "refgen";
+ <&gcc GCC_PCIE_0_CLKREF_CLK>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1904,18 +1912,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06200 0 0x170>, /* tx */
- <0 0x01c06400 0 0x200>, /* rx */
- <0 0x01c06800 0 0x1f0>, /* pcs */
- <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -1972,7 +1968,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
@@ -1986,14 +1982,22 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
- reg = <0 0x01c0e000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "refgen";
+ <&gcc GCC_PCIE_1_CLKREF_CLK>,
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2002,20 +2006,6 @@ pcie1_phy: phy@1c0e000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e200 {
- reg = <0 0x01c0e200 0 0x170>, /* tx0 */
- <0 0x01c0e400 0 0x200>, /* rx0 */
- <0 0x01c0ea00 0 0x1f0>, /* pcs */
- <0 0x01c0e600 0 0x170>, /* tx1 */
- <0 0x01c0e800 0 0x200>, /* rx1 */
- <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
ufs_mem_hc: ufshc@1d84000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 11/13] arm64: dts: qcom: sm8250: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (9 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 10/13] arm64: dts: qcom: sm8150: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:27 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 12/13] arm64: dts: qcom: sm8450: " Dmitry Baryshkov
` (2 subsequent siblings)
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 112 +++++++++++----------------
1 file changed, 45 insertions(+), 67 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1365052e0a13..abe39b0470da 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1899,7 +1899,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
@@ -1914,15 +1914,23 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
- reg = <0 0x01c06000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
+
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_WIFI_CLKREF_EN>,
- <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1931,20 +1939,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06200 0 0x170>, /* tx */
- <0 0x01c06400 0 0x200>, /* rx */
- <0 0x01c06800 0 0x1f0>, /* pcs */
- <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -2006,7 +2000,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
@@ -2021,15 +2015,23 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
- reg = <0 0x01c0e000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x1000>;
+
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2038,22 +2040,6 @@ pcie1_phy: phy@1c0e000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e200 {
- reg = <0 0x01c0e200 0 0x170>, /* tx0 */
- <0 0x01c0e400 0 0x200>, /* rx0 */
- <0 0x01c0ea00 0 0x1f0>, /* pcs */
- <0 0x01c0e600 0 0x170>, /* tx1 */
- <0 0x01c0e800 0 0x200>, /* rx1 */
- <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
pcie2: pci@1c10000 {
@@ -2115,7 +2101,7 @@ pcie2: pci@1c10000 {
power-domains = <&gcc PCIE_2_GDSC>;
- phys = <&pcie2_lane>;
+ phys = <&pcie2_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
@@ -2130,15 +2116,23 @@ pcie2: pci@1c10000 {
pcie2_phy: phy@1c16000 {
compatible = "qcom,sm8250-qmp-modem-pcie-phy";
- reg = <0 0x01c16000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c16000 0 0x1000>;
+
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_MDM_CLKREF_EN>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_2_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "phy";
@@ -2147,22 +2141,6 @@ pcie2_phy: phy@1c16000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie2_lane: phy@1c16200 {
- reg = <0 0x01c16200 0 0x170>, /* tx0 */
- <0 0x01c16400 0 0x200>, /* rx0 */
- <0 0x01c16a00 0 0x1f0>, /* pcs */
- <0 0x01c16600 0 0x170>, /* tx1 */
- <0 0x01c16800 0 0x200>, /* rx1 */
- <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "pcie_2_pipe_clk";
- };
};
ufs_mem_hc: ufshc@1d84000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 12/13] arm64: dts: qcom: sm8450: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (10 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 11/13] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:28 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 13/13] ARM: dts: qcom-sdx55: " Dmitry Baryshkov
2023-08-17 9:55 ` (subset) [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer " Vinod Koul
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes). As a part of this conversion also
change the "refgen" name to more correct "rchng".
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 82 ++++++++++++----------------
1 file changed, 35 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 8c58b7747ff9..02153f6cb274 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -750,8 +750,8 @@ gcc: clock-controller@100000 {
#power-domain-cells = <1>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>,
- <&pcie0_lane>,
- <&pcie1_lane>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
<0>,
<&ufs_mem_phy 0>,
<&ufs_mem_phy 1>,
@@ -1775,7 +1775,7 @@ pcie0: pci@1c00000 {
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
- <&pcie0_lane>,
+ <&pcie0_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1806,7 +1806,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1820,15 +1820,23 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
- reg = <0 0x01c06000 0 0x200>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x2000>;
+
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_EN>,
- <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1837,19 +1845,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06e00 0 0x200>, /* tx */
- <0 0x01c07000 0 0x200>, /* rx */
- <0 0x01c06200 0 0x200>, /* pcs */
- <0 0x01c06600 0 0x200>; /* pcs_pcie */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -1889,7 +1884,7 @@ pcie1: pci@1c08000 {
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
- <&pcie1_lane>,
+ <&pcie1_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1918,7 +1913,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
@@ -1930,17 +1925,25 @@ pcie1: pci@1c08000 {
status = "disabled";
};
- pcie1_phy: phy@1c0f000 {
+ pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
- reg = <0 0x01c0f000 0 0x200>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x2000>;
+
clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_EN>,
- <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -1949,21 +1952,6 @@ pcie1_phy: phy@1c0f000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e000 {
- reg = <0 0x01c0e000 0 0x200>, /* tx */
- <0 0x01c0e200 0 0x300>, /* rx */
- <0 0x01c0f200 0 0x200>, /* pcs */
- <0 0x01c0e800 0 0x200>, /* tx */
- <0 0x01c0ea00 0 0x300>, /* rx */
- <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- #phy-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
config_noc: interconnect@1500000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 13/13] ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (11 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 12/13] arm64: dts: qcom: sm8450: " Dmitry Baryshkov
@ 2023-07-31 10:57 ` Dmitry Baryshkov
2023-07-31 19:29 ` Konrad Dybcio
2023-08-17 9:55 ` (subset) [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer " Vinod Koul
13 siblings, 1 reply; 27+ messages in thread
From: Dmitry Baryshkov @ 2023-07-31 10:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 31 ++++++++++----------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 55ce87b75253..4b0039ccd0da 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -379,7 +379,7 @@ pcie_rc: pcie@1c00000 {
power-domains = <&gcc PCIE_GDSC>;
- phys = <&pcie_lane>;
+ phys = <&pcie_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -428,7 +428,7 @@ pcie_ep: pcie-ep@1c00000 {
resets = <&gcc GCC_PCIE_BCR>;
reset-names = "core";
power-domains = <&gcc PCIE_GDSC>;
- phys = <&pcie_lane>;
+ phys = <&pcie_phy>;
phy-names = "pciephy";
max-link-speed = <3>;
num-lanes = <2>;
@@ -438,18 +438,25 @@ pcie_ep: pcie-ep@1c00000 {
pcie_phy: phy@1c07000 {
compatible = "qcom,sdx55-qmp-pcie-phy";
- reg = <0x01c07000 0x1c4>;
+ reg = <0x01c07000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
<&gcc GCC_PCIE_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+ <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+ <&gcc GCC_PCIE_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
- "refgen";
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_PHY_BCR>;
reset-names = "phy";
@@ -458,20 +465,6 @@ pcie_phy: phy@1c07000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie_lane: lanes@1c06000 {
- reg = <0x01c06000 0x104>, /* tx0 */
- <0x01c06200 0x328>, /* rx0 */
- <0x01c07200 0x1e8>, /* pcs */
- <0x01c06800 0x104>, /* tx1 */
- <0x01c06a00 0x328>, /* rx1 */
- <0x01c07600 0x800>; /* pcs_misc */
- clocks = <&gcc GCC_PCIE_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- clock-output-names = "pcie_pipe_clk";
- };
};
ipa: ipa@1e40000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v2 02/13] phy: qcom-qmp-pcie: simplify clock handling
2023-07-31 10:57 ` [PATCH v2 02/13] phy: qcom-qmp-pcie: simplify clock handling Dmitry Baryshkov
@ 2023-07-31 12:56 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 12:56 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> For some of existing PHYs for new binding we are going to change refgen
> to more correct "rchng". Rather than introducing additional code
> to handle legacy vs current bindings (and clock names), use
> devm_clk_bulk_get_optional().
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Nice!
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 04/13] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 04/13] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings Dmitry Baryshkov
@ 2023-07-31 19:21 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:21 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 05/13] arm64: dts: qcom: ipq8074: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 05/13] arm64: dts: qcom: ipq8074: " Dmitry Baryshkov
@ 2023-07-31 19:22 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:22 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 63 +++++++++++----------------
> 1 file changed, 26 insertions(+), 37 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index 00ed71936b47..e4447a9d7929 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -211,59 +211,48 @@ qusb_phy_0: phy@79000 {
>
> pcie_qmp0: phy@84000 {
> compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
> - reg = <0x00084000 0x1bc>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> + reg = <0x00084000 0x1000>;
>
> clocks = <&gcc GCC_PCIE0_AUX_CLK>,
> - <&gcc GCC_PCIE0_AHB_CLK>;
> - clock-names = "aux", "cfg_ahb";
> + <&gcc GCC_PCIE0_AHB_CLK>,
> + <&gcc GCC_PCIE0_PIPE_CLK>;
Can you align the clocks entries?
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 06/13] arm64: dts: qcom: msm8998: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 06/13] arm64: dts: qcom: msm8998: " Dmitry Baryshkov
@ 2023-07-31 19:24 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:24 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 07/13] arm64: dts: qcom: sc7280: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 07/13] arm64: dts: qcom: sc7280: " Dmitry Baryshkov
@ 2023-07-31 19:25 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:25 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ++++++++++------------------
> 1 file changed, 12 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 4353f7265877..670092731c6c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -869,7 +869,7 @@ gcc: clock-controller@100000 {
> reg = <0 0x00100000 0 0x1f0000>;
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
> - <0>, <&pcie1_lane>,
> + <0>, <&pcie1_phy>,
> <0>, <0>, <0>,
> <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
> clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
> @@ -2121,7 +2121,7 @@ pcie1: pci@1c08000 {
>
> clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
> <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
> - <&pcie1_lane>,
> + <&pcie1_phy>,
> <&rpmhcc RPMH_CXO_CLK>,
> <&gcc GCC_PCIE_1_AUX_CLK>,
> <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> @@ -2155,7 +2155,7 @@ pcie1: pci@1c08000 {
>
> power-domains = <&gcc GCC_PCIE_1_GDSC>;
>
> - phys = <&pcie1_lane>;
> + phys = <&pcie1_phy>;
> phy-names = "pciephy";
>
> pinctrl-names = "default";
> @@ -2171,15 +2171,18 @@ pcie1: pci@1c08000 {
>
> pcie1_phy: phy@1c0e000 {
> compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
> - reg = <0 0x01c0e000 0 0x1c0>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> + reg = <0 0x01c0e000 0 0x1000>;
> clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
> <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> <&gcc GCC_PCIE_CLKREF_EN>,
> - <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
> - clock-names = "aux", "cfg_ahb", "ref", "refgen";
> + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
> + <&gcc GCC_PCIE_1_PIPE_CLK>;
> + clock-names = "aux", "cfg_ahb", "ref", "refgen", "pipe";
1 per line, pretty please?
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 08/13] arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 08/13] arm64: dts: qcom: sc8180x: " Dmitry Baryshkov
@ 2023-07-31 19:26 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:26 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sc8180x.dtsi | 140 ++++++++++----------------
> 1 file changed, 51 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> index 486f7ffef43b..fae149e33b98 100644
> --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> @@ -1749,7 +1749,7 @@ pcie0: pci@1c00000 {
> <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
> interconnect-names = "pcie-mem", "cpu-pcie";
>
> - phys = <&pcie0_lane>;
> + phys = <&pcie0_phy>;
> phy-names = "pciephy";
>
> status = "disabled";
> @@ -1757,15 +1757,20 @@ pcie0: pci@1c00000 {
>
> pcie0_phy: phy-wrapper@1c06000 {
> compatible = "qcom,sc8180x-qmp-pcie-phy";
> - reg = <0 0x1c06000 0 0x1c0>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> + reg = <0 0x1c06000 0 0x1000>;
Please pad reg to 8 hex digits, here and below since you're already
touching this
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 09/13] arm64: dts: qcom: sdm845: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 09/13] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
@ 2023-07-31 19:26 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:26 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 10/13] arm64: dts: qcom: sm8150: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 10/13] arm64: dts: qcom: sm8150: " Dmitry Baryshkov
@ 2023-07-31 19:27 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:27 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes). As a part of this conversion also
> add the missing "ref" clock to the PCIe PHY devices.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 11/13] arm64: dts: qcom: sm8250: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 11/13] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
@ 2023-07-31 19:27 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:27 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 12/13] arm64: dts: qcom: sm8450: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 12/13] arm64: dts: qcom: sm8450: " Dmitry Baryshkov
@ 2023-07-31 19:28 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:28 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes). As a part of this conversion also
> change the "refgen" name to more correct "rchng".
Usually that's dodgy, but since this commit aligns things with
bindings, I'll allow it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 13/13] ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings
2023-07-31 10:57 ` [PATCH v2 13/13] ARM: dts: qcom-sdx55: " Dmitry Baryshkov
@ 2023-07-31 19:29 ` Konrad Dybcio
0 siblings, 0 replies; 27+ messages in thread
From: Konrad Dybcio @ 2023-07-31 19:29 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31.07.2023 12:57, Dmitry Baryshkov wrote:
> Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: (subset) [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
` (12 preceding siblings ...)
2023-07-31 10:57 ` [PATCH v2 13/13] ARM: dts: qcom-sdx55: " Dmitry Baryshkov
@ 2023-08-17 9:55 ` Vinod Koul
13 siblings, 0 replies; 27+ messages in thread
From: Vinod Koul @ 2023-08-17 9:55 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Dmitry Baryshkov
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On Mon, 31 Jul 2023 13:57:46 +0300, Dmitry Baryshkov wrote:
> Reviewing several patchsets for newer platforms made it clear that
> having two styles of QMP PHY bindings causes confusion. Despite binding
> documents having notes telling that old bindings should be used for
> older platforms, it is too easy to attempt adding new platform with
> older QMP PHY binding. Thus let's have just a single documented style of
> bindings.
>
> [...]
Applied, thanks!
[01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
commit: 1c42a5f4e84b217aa44747079aae9ba26c29e328
[02/13] phy: qcom-qmp-pcie: simplify clock handling
commit: c4b46cdfc9ef4cd003ee52bb0a2b3c43ed26cd60
[03/13] phy: qcom-qmp-pcie: populate offsets configuration
commit: 64adc0bf06ad5855da5a02b9653fb7cfda289c50
Best regards,
--
~Vinod
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
2023-07-31 10:57 ` [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml Dmitry Baryshkov
@ 2023-08-19 13:31 ` Krzysztof Kozlowski
0 siblings, 0 replies; 27+ messages in thread
From: Krzysztof Kozlowski @ 2023-08-19 13:31 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Vinod Koul, Kishon Vijay Abraham I, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Philipp Zabel, Johan Hovold, linux-arm-msm, linux-phy, devicetree
On 31/07/2023 12:57, Dmitry Baryshkov wrote:
> Migrate legacy bindings (described in qcom,ipq8074-qmp-pcie-phy.yaml)
> to qcom,sc8280xp-qmp-pcie-phy.yaml. This removes a need to declare
> the child PHY node or split resource regions.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 278 +++---------------
> .../phy/qcom,msm8998-qmp-pcie-phy.yaml | 97 ++++++
> .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 34 ++-
> 3 files changed, 163 insertions(+), 246 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
> index 3d42ee3901a1..5073007267ad 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
> @@ -13,287 +13,79 @@ description:
> QMP PHY controller supports physical layer functionality for a number of
> controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
>
> - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
> - qcom,sc8280xp-qmp-pcie-phy.yaml.
> -
> properties:
> compatible:
> enum:
> - qcom,ipq6018-qmp-pcie-phy
> - qcom,ipq8074-qmp-gen3-pcie-phy
> - qcom,ipq8074-qmp-pcie-phy
> - - qcom,msm8998-qmp-pcie-phy
> - - qcom,sc8180x-qmp-pcie-phy
> - - qcom,sdm845-qhp-pcie-phy
> - - qcom,sdm845-qmp-pcie-phy
> - - qcom,sdx55-qmp-pcie-phy
> - - qcom,sm8250-qmp-gen3x1-pcie-phy
> - - qcom,sm8250-qmp-gen3x2-pcie-phy
> - - qcom,sm8250-qmp-modem-pcie-phy
> - - qcom,sm8450-qmp-gen3x1-pcie-phy
> - - qcom,sm8450-qmp-gen4x2-pcie-phy
...
> + #phy-cells = <0>;
> +
> + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
> + reset-names = "phy", "common";
> +
> + vdda-phy-supply = <&vreg_l1a_0p875>;
> + vdda-pll-supply = <&vreg_l2a_1p2>;
> + };
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> index ca55ed9d74ac..a2c894a33c1c 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> @@ -18,11 +18,21 @@ properties:
> enum:
> - qcom,sa8775p-qmp-gen4x2-pcie-phy
> - qcom,sa8775p-qmp-gen4x4-pcie-phy
> + - qcom,sc8180x-qmp-pcie-phy
> - qcom,sc8280xp-qmp-gen3x1-pcie-phy
> - qcom,sc8280xp-qmp-gen3x2-pcie-phy
> - qcom,sc8280xp-qmp-gen3x4-pcie-phy
> + - qcom,sdm845-qhp-pcie-phy
> + - qcom,sdm845-qmp-pcie-phy
> + - qcom,sdx55-qmp-pcie-phy
> - qcom,sdx65-qmp-gen4x2-pcie-phy
> + - qcom,sm8150-qmp-gen3x1-pcie-phy
This was not present before. If you add new compatible, split it to new
patch.
> + - qcom,sm8250-qmp-gen3x1-pcie-phy
> + - qcom,sm8250-qmp-gen3x2-pcie-phy
> + - qcom,sm8250-qmp-modem-pcie-phy
> - qcom,sm8350-qmp-gen3x1-pcie-phy
> + - qcom,sm8450-qmp-gen3x1-pcie-phy
> + - qcom,sm8450-qmp-gen4x2-pcie-phy
> - qcom,sm8550-qmp-gen3x2-pcie-phy
> - qcom,sm8550-qmp-gen4x2-pcie-phy
The rest looks good to me.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2023-08-19 13:33 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-31 10:57 [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer style of bindings Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 01/13] dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml Dmitry Baryshkov
2023-08-19 13:31 ` Krzysztof Kozlowski
2023-07-31 10:57 ` [PATCH v2 02/13] phy: qcom-qmp-pcie: simplify clock handling Dmitry Baryshkov
2023-07-31 12:56 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 03/13] phy: qcom-qmp-pcie: populate offsets configuration Dmitry Baryshkov
2023-07-31 10:57 ` [PATCH v2 04/13] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings Dmitry Baryshkov
2023-07-31 19:21 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 05/13] arm64: dts: qcom: ipq8074: " Dmitry Baryshkov
2023-07-31 19:22 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 06/13] arm64: dts: qcom: msm8998: " Dmitry Baryshkov
2023-07-31 19:24 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 07/13] arm64: dts: qcom: sc7280: " Dmitry Baryshkov
2023-07-31 19:25 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 08/13] arm64: dts: qcom: sc8180x: " Dmitry Baryshkov
2023-07-31 19:26 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 09/13] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
2023-07-31 19:26 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 10/13] arm64: dts: qcom: sm8150: " Dmitry Baryshkov
2023-07-31 19:27 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 11/13] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
2023-07-31 19:27 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 12/13] arm64: dts: qcom: sm8450: " Dmitry Baryshkov
2023-07-31 19:28 ` Konrad Dybcio
2023-07-31 10:57 ` [PATCH v2 13/13] ARM: dts: qcom-sdx55: " Dmitry Baryshkov
2023-07-31 19:29 ` Konrad Dybcio
2023-08-17 9:55 ` (subset) [PATCH v2 00/13] phy: qcom-qmp-pcie: convert to newer " Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).