Re: [PATCH v2] ARM: dts: lan966x: add led configuration

[<Claudiu.Beznea@microchip.com>]

On 02.09.2022 09:24, Horatiu Vultur wrote:
> Add led configuration for pcb8291 and pcb8309. Both pcbs have 4 leds which
> are connected to the sgpio controller.
> 
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

Applied to at91-dt, thanks!

> ---
> v1->v2:
> - remove status from the leds node as default is okay
> ---
>  arch/arm/boot/dts/lan966x-pcb8291.dts | 28 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/lan966x-pcb8309.dts | 28 +++++++++++++++++++++++++++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
> index 24d9055c4a08..289a31649422 100644
> --- a/arch/arm/boot/dts/lan966x-pcb8291.dts
> +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
> @@ -23,6 +23,34 @@ gpio-restart {
>  		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
>  		priority = <200>;
>  	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led-s0-blue {
> +			label = "s0:blue";
> +			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led-s0-green {
> +			label = "s0:green";
> +			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led-s1-blue {
> +			label = "s1:blue";
> +			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led-s1-green {
> +			label = "s1:green";
> +			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +	};
>  };
>  
>  &gpio {
> diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
> index 05ce27ed5648..cfd7c8933703 100644
> --- a/arch/arm/boot/dts/lan966x-pcb8309.dts
> +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
> @@ -42,6 +42,34 @@ i2c103: i2c-sfp@2 {
>  		};
>  	};
>  
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led-s0-green {
> +			label = "s0:green";
> +			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led-s0-red {
> +			label = "s0:red";
> +			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led-s1-green {
> +			label = "s1:green";
> +			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led-s1-red {
> +			label = "s1:red";
> +			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +	};
> +
>  	mux: mux-controller {
>  		compatible = "gpio-mux";
>  		#mux-control-cells = <0>;