From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm1-f48.google.com (mail-wm1-f48.google.com [209.85.128.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9E20A3B0ADF for ; Mon, 11 May 2026 08:19:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.48 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1778487564; cv=none; b=KIWS0Q5k0I/JPMgDwZ773TlZYiooLIuKTDuSaCD6jxBN81eHo1XmxQNZTy5ljyaYQWTJxX0sy9vwW1QHDA7em+9FPsrHKF9qttMLsOSoVdv7NHupMzaTlgnpoq+srNcLBcooI/Q1UzvcSWEbETWmGGKvmNEG+038qdUkyGNFwQE= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1778487564; c=relaxed/simple; bh=NwVyXbFXLaRVIuradKbOPLojYL57TmtZJtz4Pm5cM3g=; h=Message-ID:Date:MIME-Version:Subject:To:Cc:References:From: In-Reply-To:Content-Type; b=LgPlTa34PBZG9APTOqBzCgbKMXQw0quXz1ytfiFx77gRmPsmSeXD93aUJaiJiiWlTCM7CHfCoyam1kn3u1T7h7cnwtUuJ/hlFCbvVrC8Q2Sv1SziSNfbPkad+7e/WlKz7gtTfs5A0DJ9IFAxMpedKAKuLP9eE7IcdvZxBr+x5h0= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=z0A614Wq; arc=none smtp.client-ip=209.85.128.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="z0A614Wq" Received: by mail-wm1-f48.google.com with SMTP id 5b1f17b1804b1-488b8bc6bc9so24404375e9.3 for ; Mon, 11 May 2026 01:19:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1778487543; x=1779092343; darn=vger.kernel.org; h=content-transfer-encoding:in-reply-to:organization:autocrypt :content-language:from:references:cc:to:subject:reply-to:user-agent :mime-version:date:message-id:from:to:cc:subject:date:message-id :reply-to; bh=oW1dcXgQjovcdY6k/1vZS5jRNNH7isj2uzAbIZD+FZY=; b=z0A614WqayDmah65aNEndsIGpqLDs6mRSZU+N8AlKPlTGzo99ye0SWjhVKcPWfSPdF UD5NQyxtraea6SFnjoFgsMuReUWyusQxVqw50g2B3Trq5GOnSBn2Mlt/MQn+4YTvA3Tj aqiNvIu94KvUFsXOHRhom/d2CBiHJBsEwsHilcv8hoyVrE/r+jtglYkAozqwEkVgYOM+ 8u8fn2pHKvacJVW7SWDMjbxb2EyyGJIh49uQfDtd1ASRl2LjAgLVVSdTRLRiOuXMQ+HG ceiQkegBw+FuRNTVbV4wjGv+/BZDFGvvbg7Z1+CYjO14f+y6jN/OhhJp9FGvO35Hy2Az U5qw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1778487543; x=1779092343; h=content-transfer-encoding:in-reply-to:organization:autocrypt :content-language:from:references:cc:to:subject:reply-to:user-agent :mime-version:date:message-id:x-gm-gg:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=oW1dcXgQjovcdY6k/1vZS5jRNNH7isj2uzAbIZD+FZY=; b=ILJP/bLSNBse9V6LQVdHOWqUkI8uLmuToEW3XgpS6hQ45GfExNx6/maojh+mhnnW5C gOyiSKb1CIjFGEtN9Nt3Fu5+fiLg7VIOWZNa0VEvXOoHue4skB1M88TCvGWdq+ga/Bx0 r1L0MgtZqrNz34nSULWTf4IClXikb3isJcVAeTxC1doFvrILRCuK5KraPWvrXYng8iRv JMN+cCZM6EdYzXqDgIb3dWqDRxQvs5X38pC6s79VfutjYIAgy1u97zfsnlP/33r0cxD1 67a1lV8SFFut/Fq5B6tdVfW71R5fgDnwn/NSOqMGdruKm8Y1E6roN42jtoc6QD9OLUrj LemQ== X-Forwarded-Encrypted: i=1; AFNElJ/3w2S/X4IYovbcyUoxvlh0lTF0HPHL/Tcv/pp9nsCWupPqaMwXCKByXJzkCATeWgkjarTF0QoS+sXZ@vger.kernel.org X-Gm-Message-State: AOJu0YxCeCeNjGlTIHQavfhS831zT+jm1KAbJ2WEg7iBdrrpiB8TlO3A ZExK2rGpH7z6v03eDI/bR0KZiAEBN4a1akkJZXtIZILmRqk/tSXsHA/yl+SoATvRVxk= X-Gm-Gg: Acq92OG7jzQWsHb84UFvnrk9uoiqNmOtmpDicHZRTs68RAFgokadScEh4zaQMIWUDs2 8eSlmzbyQxAHvCvJQKphXymZd17S5/aImuy4eoo1hT6apc7tQbXUaEkirxhGP6LFbjt8NSK7QWz 6hvm6Jm8n0jcj7Cie3El5CxSlHoXOGelwPgMZdyHAxX0FHmhm8qlneNLVljQuwUkh13GonSIeRY DUjNMQY1PNW/AcRL744CL2Ij5ZZQVFM0RbXLfnoIALKN/Hc1Uhrv4J3BAv6njLjFm00atOVo5iJ ip+n5B+3ScnEe68FHJ2cC303kVTtxrkpBRx0L19KldbewTbAIiyGqyNG0tiztcyLDOKYOzZ5xXA mDmwl8/zQFD1RJsqTW6Jhe4DNgKt1PL7CmdeNUtWTkU55GFUj9lhFPelWTbFAUK3KLX2o6gpqp3 IdRl9MiRLDTkJDsN2n90rLIMZeskk0w5NkWrY2isqv32xkg1ohsCqIamGzDAgINdqMhB0YJZXq2 0O4C34= X-Received: by 2002:a05:600c:c094:b0:48a:599a:3716 with SMTP id 5b1f17b1804b1-48e51f40a29mr267305125e9.23.1778487542911; Mon, 11 May 2026 01:19:02 -0700 (PDT) Received: from ?IPV6:2a01:e0a:106d:1080:63dd:7879:45c5:21b9? ([2a01:e0a:106d:1080:63dd:7879:45c5:21b9]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-48e701e957asm170120755e9.6.2026.05.11.01.19.02 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Mon, 11 May 2026 01:19:02 -0700 (PDT) Message-ID: <9f7368f9-f6ea-4b97-b8f6-2e2f2e62c261@linaro.org> Date: Mon, 11 May 2026 10:19:01 +0200 Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Reply-To: Neil Armstrong Subject: Re: [PATCH 2/2] arm64: dts: qcom: add basic devicetree for Ayaneo Pocket DS gaming console To: azkali.limited@gmail.com, Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Teguh Sobirin References: <20260510-pocketds-v1-0-cf05acec06af@gmail.com> <20260510-pocketds-v1-2-cf05acec06af@gmail.com> From: Neil Armstrong Content-Language: en-US, fr Autocrypt: addr=neil.armstrong@linaro.org; keydata= xsBNBE1ZBs8BCAD78xVLsXPwV/2qQx2FaO/7mhWL0Qodw8UcQJnkrWmgTFRobtTWxuRx8WWP GTjuhvbleoQ5Cxjr+v+1ARGCH46MxFP5DwauzPekwJUD5QKZlaw/bURTLmS2id5wWi3lqVH4 BVF2WzvGyyeV1o4RTCYDnZ9VLLylJ9bneEaIs/7cjCEbipGGFlfIML3sfqnIvMAxIMZrvcl9 qPV2k+KQ7q+aXavU5W+yLNn7QtXUB530Zlk/d2ETgzQ5FLYYnUDAaRl+8JUTjc0CNOTpCeik 80TZcE6f8M76Xa6yU8VcNko94Ck7iB4vj70q76P/J7kt98hklrr85/3NU3oti3nrIHmHABEB AAHNKk5laWwgQXJtc3Ryb25nIDxuZWlsLmFybXN0cm9uZ0BsaW5hcm8ub3JnPsLAkQQTAQoA OwIbIwULCQgHAwUVCgkICwUWAgMBAAIeAQIXgBYhBInsPQWERiF0UPIoSBaat7Gkz/iuBQJk Q5wSAhkBAAoJEBaat7Gkz/iuyhMIANiD94qDtUTJRfEW6GwXmtKWwl/mvqQtaTtZID2dos04 YqBbshiJbejgVJjy+HODcNUIKBB3PSLaln4ltdsV73SBcwUNdzebfKspAQunCM22Mn6FBIxQ GizsMLcP/0FX4en9NaKGfK6ZdKK6kN1GR9YffMJd2P08EO8mHowmSRe/ExAODhAs9W7XXExw UNCY4pVJyRPpEhv373vvff60bHxc1k/FF9WaPscMt7hlkbFLUs85kHtQAmr8pV5Hy9ezsSRa GzJmiVclkPc2BY592IGBXRDQ38urXeM4nfhhvqA50b/nAEXc6FzqgXqDkEIwR66/Gbp0t3+r yQzpKRyQif3OwE0ETVkGzwEIALyKDN/OGURaHBVzwjgYq+ZtifvekdrSNl8TIDH8g1xicBYp QTbPn6bbSZbdvfeQPNCcD4/EhXZuhQXMcoJsQQQnO4vwVULmPGgtGf8PVc7dxKOeta+qUh6+ SRh3vIcAUFHDT3f/Zdspz+e2E0hPV2hiSvICLk11qO6cyJE13zeNFoeY3ggrKY+IzbFomIZY 4yG6xI99NIPEVE9lNBXBKIlewIyVlkOaYvJWSV+p5gdJXOvScNN1epm5YHmf9aE2ZjnqZGoM Mtsyw18YoX9BqMFInxqYQQ3j/HpVgTSvmo5ea5qQDDUaCsaTf8UeDcwYOtgI8iL4oHcsGtUX oUk33HEAEQEAAcLAXwQYAQIACQUCTVkGzwIbDAAKCRAWmrexpM/4rrXiB/sGbkQ6itMrAIfn M7IbRuiSZS1unlySUVYu3SD6YBYnNi3G5EpbwfBNuT3H8//rVvtOFK4OD8cRYkxXRQmTvqa3 3eDIHu/zr1HMKErm+2SD6PO9umRef8V82o2oaCLvf4WeIssFjwB0b6a12opuRP7yo3E3gTCS KmbUuLv1CtxKQF+fUV1cVaTPMyT25Od+RC1K+iOR0F54oUJvJeq7fUzbn/KdlhA8XPGzwGRy 4zcsPWvwnXgfe5tk680fEKZVwOZKIEuJC3v+/yZpQzDvGYJvbyix0lHnrCzq43WefRHI5XTT QbM0WUIBIcGmq38+OgUsMYu4NzLu7uZFAcmp6h8g Organization: Linaro In-Reply-To: <20260510-pocketds-v1-2-cf05acec06af@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Hi, On 5/10/26 18:05, Alexandre Hamamdjian via B4 Relay wrote: > From: Teguh Sobirin > > Add initial device tree support for the Ayaneo Pocket DS gaming > console based on the Qualcomm QCS8550 platform. > > The board file is split into qcs8550-ayaneo-pocket-common.dtsi and > qcs8550-ayaneo-pocketds.dts in anticipation of additional boards in > the same family that share the QCS8550 base. Only the Pocket DS has > been verified on hardware so far; the shared dtsi is intended to pick > up sibling boards as they are submitted. Please don't, this is dead code, please send a single file and then split it when you introduce variants boards. > > Co-developed-by: Alexandre Hamamdjian > Signed-off-by: Alexandre Hamamdjian > Signed-off-by: Teguh Sobirin > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/qcs8550-ayaneo-pocket-common.dtsi | 1596 ++++++++++++++++++++ > .../boot/dts/qcom/qcs8550-ayaneo-pocketds.dts | 170 +++ > 3 files changed, 1767 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index cc42829f92eb..45859e977bc9 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -185,6 +185,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo > > dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayaneo-pocketds.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb > > diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocket-common.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocket-common.dtsi > new file mode 100644 > index 000000000000..8d215a9d31d5 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocket-common.dtsi > @@ -0,0 +1,1596 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2025, Teguh Sobirin. > + */ > + > +#include > +#include > +#include "qcs8550.dtsi" > +#include "pm8550.dtsi" > +#include "pm8550b.dtsi" > +#define PMK8550VE_SID 5 > +#include "pm8550ve.dtsi" > +#include "pm8550vs.dtsi" > +#include "pmk8550.dtsi" > + > +/delete-node/ &aop_image_mem; > +/delete-node/ &aop_config_mem; > +/delete-node/ &camera_mem; > +/delete-node/ &ipa_fw_mem; > +/delete-node/ &ipa_gsi_mem; > +/delete-node/ &mpss_dsm_mem; > +/delete-node/ &mpss_mem; > +/delete-node/ &q6_mpss_dtb_mem; > +/delete-node/ &cdsp_mem; > +/delete-node/ &q6_cdsp_dtb_mem; > + > +/delete-node/ &remoteproc_mpss; > +/delete-node/ &remoteproc_cdsp; > + > +/ { > + chassis-type = "handset"; > + > + aliases { > + serial0 = &uart7; > + serial1 = &uart14; > + hsuart0 = &uart11; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&volume_up_n>; > + pinctrl-names = "default"; > + > + key-volume-up { > + label = "Volume Up"; > + debounce-interval = <15>; > + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; > + linux,code = ; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; > + #address-cells = <1>; > + #size-cells = <0>; > + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_hs_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss_in: endpoint { > + remote-endpoint = <&redriver_ss_out>; > + }; > + }; > + }; > + }; > + }; > + > + reserved-memory { > + hyp_mem: hyp-region@80000000 { > + reg = <0 0x80000000 0 0xa00000>; > + no-map; > + }; > + > + cpusys_vm_mem: cpusys-vm-region@80a00000 { > + reg = <0 0x80a00000 0 0x400000>; > + no-map; > + }; > + > + hyp_tags_mem: hyp-tags-region@80e00000 { > + reg = <0 0x80e00000 0 0x3d0000>; > + no-map; > + }; > + > + xbl_sc_mem: xbl-sc-region@d8100000 { > + reg = <0 0xd8100000 0 0x40000>; > + no-map; > + }; > + > + hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 { > + reg = <0 0x811d0000 0 0x30000>; > + no-map; > + }; > + > + xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 { > + reg = <0 0x81a00000 0 0x260000>; > + no-map; > + }; > + > + aop_config_merged_mem: aop-config-merged-region@81c80000 { > + reg = <0 0x81c80000 0 0x74000>; > + no-map; > + }; > + > + chipinfo_mem: chipinfo-region@81cf4000 { > + reg = <0 0x81cf4000 0 0x1000>; > + no-map; > + }; > + > + global_sync_mem: global-sync-region@82600000 { > + reg = <0 0x82600000 0 0x100000>; > + no-map; > + }; > + > + tz_stat_mem: tz-stat-region@82700000 { > + reg = <0 0x82700000 0 0x100000>; > + no-map; > + }; > + > + cpucp_fw_mem: cpucp-fw-region@d8140000 { > + reg = <0 0xd8140000 0 0x1c0000>; > + no-map; > + }; > + > + qtee_mem: qtee-region@d8300000 { > + reg = <0 0xd8300000 0 0x500000>; > + no-map; > + }; > + > + hwfence_shbuf: hwfence-shbuf-region@e6440000 { > + reg = <0 0xe6440000 0 0x2dd000>; > + no-map; > + }; > + > + hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 { > + reg = <0 0xff700000 0 0x100000>; > + no-map; > + }; > + > + llcc_lpi_mem: llcc_lpi_region@ff800000 { > + reg = <0 0xff800000 0 0x600000>; > + no-map; > + }; > + > + hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 { > + reg = <0 0xfce00000 0 0x2900000>; > + no-map; > + }; > + > + splash_region: splash_region@b8000000 { > + reg = <0x0 0xb8000000 0x0 0x2b00000>; > + label = "cont_splash_region"; > + no-map; > + }; > + }; > + > + sound { > + status = "okay"; > + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; > + model = "SM8550-APS"; > + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", > + "SpkrRight IN", "WSA_SPK2 OUT", > + "VA DMIC0", "vdd-micb", > + "VA DMIC1", "vdd-micb"; > + > + wsa-dai-link { > + link-name = "WSA Playback"; > + > + cpu { > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&spk_amp_l>, > + <&spk_amp_r>, > + <&swr0 0>, > + <&lpass_wsamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + va-dai-link { > + link-name = "VA Capture"; > + > + cpu { > + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; > + }; > + > + codec { > + sound-dai = <&lpass_vamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + }; > + > + thermal-zones { > + cpuss0-thermal { Add labels for each thermal zones on the sm8550.dtsi files instead. Please see the sm8650-ayaneo-pocket-s2 as reference. > + polling-delay = <200>; > + trips { > + cpuss0_fan0: trip-point2 { > + temperature = <40000>; > + hysteresis = <3000>; > + type = "passive"; > + }; Bad alignment Please add empty lines like the rest of the file. > + cpuss0_fan1: trip-point3 { > + temperature = <50000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss0_fan2: trip-point4 { > + temperature = <60000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss0_fan3: trip-point5 { > + temperature = <65000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss0_fan4: trip-point6 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss0_fan5: trip-point7 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss0_fan6: trip-point8 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + cpuss1-thermal { > + polling-delay = <200>; > + trips { > + cpuss1_fan0: trip-point2 { > + temperature = <40000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss1_fan1: trip-point3 { > + temperature = <50000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss1_fan2: trip-point4 { > + temperature = <60000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss1_fan3: trip-point5 { > + temperature = <65000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss1_fan4: trip-point6 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss1_fan5: trip-point7 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss1_fan6: trip-point8 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + cpuss2-thermal { > + polling-delay = <200>; > + trips { > + cpuss2_fan0: trip-point2 { > + temperature = <40000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss2_fan1: trip-point3 { > + temperature = <50000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss2_fan2: trip-point4 { > + temperature = <60000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss2_fan3: trip-point5 { > + temperature = <65000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss2_fan4: trip-point6 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss2_fan5: trip-point7 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss2_fan6: trip-point8 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + cpuss3-thermal { > + polling-delay = <200>; > + trips { > + cpuss3_fan0: trip-point2 { > + temperature = <40000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss3_fan1: trip-point3 { > + temperature = <50000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss3_fan2: trip-point4 { > + temperature = <60000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss3_fan3: trip-point5 { > + temperature = <65000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss3_fan4: trip-point6 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss3_fan5: trip-point7 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpuss3_fan6: trip-point8 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + cpu7-top-thermal { > + polling-delay = <200>; > + trips { > + cpu7_top_fan0: trip-point2 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpu7_top_fan1: trip-point3 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + cpu7_top_fan2: trip-point4 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-0-thermal { > + polling-delay = <200>; > + trips { > + gpuss0_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss0_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss0_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-1-thermal { > + polling-delay = <200>; > + trips { > + gpuss1_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss1_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss1_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-2-thermal { > + polling-delay = <200>; > + trips { > + gpuss2_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss2_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss2_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-3-thermal { > + polling-delay = <200>; > + trips { > + gpuss3_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss3_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss3_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-4-thermal { > + polling-delay = <200>; > + trips { > + gpuss4_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss4_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss4_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-5-thermal { > + polling-delay = <200>; > + trips { > + gpuss5_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss5_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss5_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-6-thermal { > + polling-delay = <200>; > + trips { > + gpuss6_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss6_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss6_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + gpuss-7-thermal { > + polling-delay = <200>; > + trips { > + gpuss7_fan0: trip-point3 { > + temperature = <70000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss7_fan1: trip-point4 { > + temperature = <75000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + gpuss7_fan2: trip-point5 { > + temperature = <80000>; > + hysteresis = <3000>; > + type = "passive"; > + }; > + }; > + > + }; > + }; > + > + vdd_fan_5v0: vdd-fan-5v0-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_fan_5v0"; > + > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + > + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&fan_pwr_active>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vph_pwr: regulator-vph-pwr { > + compatible = "regulator-fixed"; > + regulator-name = " vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > + > + pwm_fan: pwm-fan { > + compatible = "pwm-fan"; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&fan_pwm_active>, <&fan_int>; > + > + fan-supply = <&vdd_fan_5v0>; > + pwms = <&pm8550_pwm 3 40000>; > + interrupt-parent = <&tlmm>; > + interrupts = <64 IRQ_TYPE_EDGE_FALLING>; > + > + #cooling-cells = <2>; > + cooling-levels = <0 30 45 60 70 90 120 150>; > + }; > + > + wcn7850-pmu { > + compatible = "qcom,wcn7850-pmu"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>; > + > + wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; > + bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; > + > + vdd-supply = <&vreg_s5g_0p85>; > + vddio-supply = <&vreg_l15b_1p8>; > + vddaon-supply = <&vreg_s2g_0p85>; > + vdddig-supply = <&vreg_s4e_0p95>; > + vddrfa1p2-supply = <&vreg_s4g_1p25>; > + vddrfa1p8-supply = <&vreg_s6g_1p86>; > + > + regulators { > + vreg_pmu_rfa_cmn: ldo0 { > + regulator-name = "vreg_pmu_rfa_cmn"; > + }; > + > + vreg_pmu_aon_0p59: ldo1 { > + regulator-name = "vreg_pmu_aon_0p59"; > + }; > + > + vreg_pmu_wlcx_0p8: ldo2 { > + regulator-name = "vreg_pmu_wlcx_0p8"; > + }; > + > + vreg_pmu_wlmx_0p85: ldo3 { > + regulator-name = "vreg_pmu_wlmx_0p85"; > + }; > + > + vreg_pmu_btcmx_0p85: ldo4 { > + regulator-name = "vreg_pmu_btcmx_0p85"; > + }; > + > + vreg_pmu_rfa_0p8: ldo5 { > + regulator-name = "vreg_pmu_rfa_0p8"; > + }; > + > + vreg_pmu_rfa_1p2: ldo6 { > + regulator-name = "vreg_pmu_rfa_1p2"; > + }; > + > + vreg_pmu_rfa_1p8: ldo7 { > + regulator-name = "vreg_pmu_rfa_1p8"; > + }; > + > + vreg_pmu_pcie_0p9: ldo8 { > + regulator-name = "vreg_pmu_pcie_0p9"; > + }; > + > + vreg_pmu_pcie_1p8: ldo9 { > + regulator-name = "vreg_pmu_pcie_1p8"; > + }; > + }; > + }; > +}; > + > +/* DMIC 01 23 */ > +&lpass_vamacro { > + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; > + pinctrl-names = "default"; > + vdd-micb-supply = <&vreg_l10b_1p8>; > + qcom,dmic-sample-rate = <4800000>; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > + vdd-l3-supply = <&vreg_s4g_1p25>; > + vdd-l5-l16-supply = <&vreg_bob1>; > + vdd-l6-l7-supply = <&vreg_bob1>; > + vdd-l8-l9-supply = <&vreg_bob1>; > + vdd-l11-supply = <&vreg_s4g_1p25>; > + vdd-l12-supply = <&vreg_s6g_1p86>; > + vdd-l15-supply = <&vreg_s6g_1p86>; > + vdd-l17-supply = <&vreg_bob2>; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = ; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2720000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5b_3p1: ldo5 { > + regulator-name = "vreg_l5b_3p1"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p8: ldo6 { > + regulator-name = "vreg_l6b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7b_1p8: ldo7 { > + regulator-name = "vreg_l7b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l8b_1p8: ldo8 { > + regulator-name = "vreg_l8b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_2p9: ldo9 { > + regulator-name = "vreg_l9b_2p9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10b_1p8: ldo10 { > + regulator-name = "vreg_l10b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11b_1p2: ldo11 { > + regulator-name = "vreg_l11b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p8: ldo12 { > + regulator-name = "vreg_l12b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_3p0: ldo13 { > + regulator-name = "vreg_l13b_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p2: ldo14 { > + regulator-name = "vreg_l14b_3p2"; > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3200000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16b_2p8: ldo16 { > + regulator-name = "vreg_l16b_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_2p5: ldo17 { > + regulator-name = "vreg_l17b_2p5"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = ; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-l1-supply = <&vreg_s4g_1p25>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4e_0p95>; > + > + vreg_l3c_0p9: ldo3 { > + regulator-name = "vreg_l3c_0p9"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-supply = <&vreg_s4e_0p95>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4e_0p95>; > + > + vreg_l1d_0p88: ldo1 { > + regulator-name = "vreg_l1d_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-3 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-l1-supply = <&vreg_s4e_0p95>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4g_1p25>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + > + vreg_s4e_0p95: smps4 { > + regulator-name = "vreg_s4e_0p95"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s5e_1p08: smps5 { > + regulator-name = "vreg_s5e_1p08"; > + regulator-min-microvolt = <1010000>; > + regulator-max-microvolt = <1120000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l1e_0p88: ldo1 { > + regulator-name = "vreg_l1e_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2e_0p9: ldo2 { > + regulator-name = "vreg_l2e_0p9"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <970000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3e_1p2: ldo3 { > + regulator-name = "vreg_l3e_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-4 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-l1-supply = <&vreg_s4e_0p95>; > + vdd-l2-supply = <&vreg_s4e_0p95>; > + vdd-l3-supply = <&vreg_s4e_0p95>; > + vdd-s4-supply = <&vph_pwr>; > + > + vreg_s4f_0p5: smps4 { > + regulator-name = "vreg_s4f_0p5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <700000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l1f_0p9: ldo1 { > + regulator-name = "vreg_l1f_0p9"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2f_0p88: ldo2 { > + regulator-name = "vreg_l2f_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3f_0p88: ldo3 { > + regulator-name = "vreg_l3f_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-5 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "g"; > + vdd-l1-supply = <&vreg_s4g_1p25>; > + vdd-l2-supply = <&vreg_s4g_1p25>; > + vdd-l3-supply = <&vreg_s4g_1p25>; > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + > + vreg_s1g_1p25: smps1 { > + regulator-name = "vreg_s1g_1p25"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s2g_0p85: smps2 { > + regulator-name = "vreg_s2g_0p85"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s3g_0p8: smps3 { > + regulator-name = "vreg_s3g_0p8"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s4g_1p25: smps4 { > + regulator-name = "vreg_s4g_1p25"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1352000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s5g_0p85: smps5 { > + regulator-name = "vreg_s5g_0p85"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s6g_1p86: smps6 { > + regulator-name = "vreg_s6g_1p86"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l1g_1p2: ldo1 { > + regulator-name = "vreg_l1g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3g_1p2: ldo3 { > + regulator-name = "vreg_l3g_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&pm8550_gpios { > + sdc2_card_det_n: sdc2-card-det-n-state { > + pins = "gpio12"; > + function = "normal"; > + input-enable; > + output-disable; > + bias-pull-up; > + power-source = <1>; > + }; > + > + volume_up_n: volume-up-n-state { > + pins = "gpio6"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > + > + fan_pwm_active: fan-pwm-active-state { > + pins = "gpio9"; > + function = "func1"; > + output-low; > + bias-disable; > + power-source = <0>; > + qcom,drive-strength = <3>; /* PMIC_GPIO_STRENGTH_LOW */ > + }; > +}; > + > +&pmk8550_gpios { > + pmk8550_sleep_clk: sleep-clk-state { > + pins = "gpio3"; > + function = "func1"; > + input-disable; > + output-enable; > + bias-disable; > + power-source = <0>; > + }; > +}; > + > +&pm8550b_eusb2_repeater { > + vdd18-supply = <&vreg_l15b_1p8>; > + vdd3-supply = <&vreg_l5b_3p1>; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = ; > + > + status = "okay"; > +}; > + > +&pmk8550_rtc { > + nvmem-cells = <&rtc_offset>; > + nvmem-cell-names = "offset"; > +}; > + > +&pmk8550_sdam_2 { > + rtc_offset: rtc-offset@bc { > + reg = <0xbc 0x4>; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > + > + /* AYANEO Controller serial interface */ > + uart11: serial@88c000 { > + compatible = "qcom,geni-uart"; > + reg = <0 0x0088c000 0 0x4000>; > + clock-names = "se"; > + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&qup_uart11_default>; > + interrupts = ; > + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS > + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, > + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY > + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; > + interconnect-names = "qup-core", "qup-config"; > + operating-points-v2 = <&qup_opp_table_100mhz>; > + power-domains = <&rpmhpd RPMHPD_CX>; > + status = "okay"; > + }; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/sm8550/ayaneo/adsp.mdt", > + "qcom/sm8550/ayaneo/adsp_dtb.mdt"; > + status = "okay"; > +}; > + > +&sdhc_2 { > + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; > + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; > + vmmc-supply = <&vreg_l9b_2p9>; > + vqmmc-supply = <&vreg_l8b_1p8>; > + no-sdio; > + no-mmc; > + > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sd-uhs-ddr50; > + > + qcom,dll-config = <0x0007442c>; > + sdhci-caps-mask = <0x3 0x0>; > + > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32764>; > +}; > + > +&swr0 { > + status = "okay"; > + > + spk_amp_l: speaker@0,0 { > + compatible = "sdw20217020400"; > + reg = <0 0>; > + > + pinctrl-0 = <&spkr_1_sd_n_active>; > + pinctrl-names = "default"; > + > + powerdown-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; > + > + vdd-1p8-supply = <&vreg_l10b_1p8>; > + vdd-io-supply = <&vreg_l10b_1p8>; > + > + #sound-dai-cells = <0>; > + sound-name-prefix = "SpkrLeft"; > + qcom,port-mapping = <1 2 3 7 10 13>; > + }; > + > + spk_amp_r: speaker@0,1 { > + compatible = "sdw20217020400"; > + reg = <0 1>; > + > + pinctrl-0 = <&spkr_2_sd_n_active>; > + pinctrl-names = "default"; > + > + powerdown-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; > + > + vdd-1p8-supply = <&vreg_l10b_1p8>; > + vdd-io-supply = <&vreg_l10b_1p8>; > + > + #sound-dai-cells = <0>; > + sound-name-prefix = "SpkrRight"; > + qcom,port-mapping = <4 5 6 7 11 13>; > + }; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <32 8>; > + > + bt_default: bt-default-state { > + bt-en-pins { > + pins = "gpio81"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + > + sw-ctrl-pins { > + pins = "gpio82"; > + function = "gpio"; > + bias-pull-down; > + }; > + }; > + > + fan_pwr_active: fan-pwr-active-state { > + pins = "gpio31"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + output-low; > + }; > + > + fan_int: fan-int-state { > + pins = "gpio64"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + upd720201_active: upd720201-active-state { > + pins = "gpio10", "gpio13", "gpio18"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + output-high; > + }; > + > + gamepad_pwr_en: gamepad-pwr-en-active-state { > + pins = "gpio52"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + output-high; > + }; > + > + qup_uart11_default: qup-uart11-default-state { > + /* TX, RX */ > + pins = "gpio70", "gpio71"; > + function = "qup2_se3"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + sde_dsi_active: sde-dsi-active-state { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <8>; > + bias-disable; > + output-high; > + }; > + > + sde_dsi_suspend: sde-dsi-suspend-state { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + sde_te_active: sde-te-active-state { > + pins = "gpio86"; > + function = "mdp_vsync"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + sde_te_suspend: sde-te-suspend-state { > + pins = "gpio86"; > + function = "mdp_vsync"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + wlan_en: wlan-en-state { > + pins = "gpio80"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + > + spkr_1_sd_n_active: spkr-1-sd-n-active-state { > + pins = "gpio7"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + output-high; > + }; > + > + spkr_2_sd_n_active: spkr-2-sd-n-active-state { > + pins = "gpio12"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + output-high; > + }; > +}; > + > +&pm8550_pwm { > + status = "okay"; > +}; > + > +&xo_board { > + clock-frequency = <76800000>; > +}; > + > +&gpi_dma1 { > + status = "okay"; > +}; > + > +&gpi_dma2 { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + firmware-name = "qcom/sm8550/a740_zap.mbn"; > + }; > +}; > + > +&gpu_opp_table { > + /* Additional speedbin for Adreno A32 > + * 719000000 RPMH_REGULATOR_LEVEL_SVS_L2 > + * 746000000 RPMH_REGULATOR_LEVEL_NOM > + * 794000000 RPMH_REGULATOR_LEVEL_NOM_L1 > + * 827000000 RPMH_REGULATOR_LEVEL_TURBO > + * 860000000 RPMH_REGULATOR_LEVEL_TURBO_L1 > + * 1000000000 RPMH_REGULATOR_LEVEL_TURBO_L2 > + */ > + opp-719000000 { > + opp-hz = /bits/ 64 <719000000>; > + opp-level = ; > + opp-peak-kBps = <10687500>; // Level 7 > + qcom,opp-acd-level = <0x882e5ffd>; > + }; > + > + opp-746000000 { > + opp-hz = /bits/ 64 <746000000>; > + opp-level = ; > + opp-peak-kBps = <10687500>; // Level 7 > + qcom,opp-acd-level = <0x882e5ffd>; > + }; > + > + opp-794000000 { > + opp-hz = /bits/ 64 <794000000>; > + opp-level = ; > + opp-peak-kBps = <14398438>; // Level 8 > + qcom,opp-acd-level = <0xa82d5ffd>; > + }; > + > + opp-827000000 { > + opp-hz = /bits/ 64 <827000000>; > + opp-level = ; > + opp-peak-kBps = <16500000>; // Level 9 > + qcom,opp-acd-level = <0xa82d5ffd>; > + }; > + > + opp-860000000 { > + opp-hz = /bits/ 64 <860000000>; > + opp-level = ; > + opp-peak-kBps = <16500000>; // Level 9 > + qcom,opp-acd-level = <0x882d5ffd>; > + }; > + > + opp-1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-level = ; > + opp-peak-kBps = <16500000>; // Level 9 > + qcom,opp-acd-level = <0x882d5ffd>; > + }; > +}; > + > +&i2c_master_hub_0 { > + status = "okay"; > +}; > + > +&i2c_hub_2 { > + status = "okay"; > + > + typec-retimer@1c { > + compatible = "onnn,nb7vpq904m"; > + reg = <0x1c>; > + vcc-supply = <&vreg_l15b_1p8>; > + > + retimer-switch; > + orientation-switch; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + redriver_ss_out: endpoint { > + remote-endpoint = <&pmic_glink_ss_in>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + redriver_ss_in: endpoint { > + data-lanes = <3 2 1 0>; > + remote-endpoint = <&usb_dp_qmpphy_out>; > + }; > + }; > + }; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_dsi0 { > + vdda-supply = <&vreg_l3e_1p2>; > + status = "okay"; > + > + display_panel: panel@0 { > + reg = <0>; > + > + pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; > + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; > + pinctrl-names = "default", "sleep"; > + }; The panel compatible is not added in the main board file, this is wrong and leaves a node without compatible. I guess you did not test your DT files against the bindings > +}; > + > +&mdss_dsi0_phy { > + vdds-supply = <&vreg_l1e_0p88>; > + status = "okay"; > +}; > + > +&mdss_dp0 { > + status = "okay"; > +}; > + > +&mdss_dp0_out { > + data-lanes = <0 1>; > +}; > + > +&pcie0 { > + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; > + > + max-link-speed = <2>; > + > + pinctrl-0 = <&pcie0_default_state>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie1 { > + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; > + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; > + > + pinctrl-0 = <&pcie1_default_state>, <&upd720201_active>, <&gamepad_pwr_en>; This is wrong, please add an upd720201 node like the ayaneo pocket s2 > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie1_phy { > + vdda-phy-supply = <&vreg_l3c_0p9>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + vdda-qref-supply = <&vreg_l1e_0p88>; > + > + status = "okay"; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l17b_2p5>; > + vcc-max-microamp = <1300000>; > + vccq-supply = <&vreg_l1g_1p2>; > + vccq-max-microamp = <1200000>; > + vdd-hba-supply = <&vreg_l3g_1p2>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l1d_0p88>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_hs_in>; > +}; > + > +&usb_1_hsphy { > + vdd-supply = <&vreg_l1e_0p88>; > + vdda12-supply = <&vreg_l3e_1p2>; > + > + phys = <&pm8550b_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_dp_qmpphy { > + vdda-phy-supply = <&vreg_l3e_1p2>; > + vdda-pll-supply = <&vreg_l3f_0p88>; > + > + status = "okay"; > +}; > + > +&usb_dp_qmpphy_out { > + remote-endpoint = <&redriver_ss_in>; > +}; > + > +&uart7 { > + status = "okay"; > +}; > + > +&uart14 { > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn7850-bt"; > + > + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; > + vddaon-supply = <&vreg_pmu_aon_0p59>; > + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; > + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; > + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; > + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; > + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; > + > + max-speed = <3200000>; > + }; > +}; > + > +&iris { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts > new file mode 100644 > index 000000000000..723b027fa73b > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts > @@ -0,0 +1,170 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2025, Teguh Sobirin. > + * Copyright (c) 2025, ROCKNIX (https://github.com/ROCKNIX) > + */ > + > +/dts-v1/; > + > +#include "qcs8550-ayaneo-pocket-common.dtsi" > + > +/ { > + model = "AYANEO Pocket DS"; > + compatible = "ayaneo,pocketds", "qcom,sm8550"; > + rocknix-u-boot-dt-id = "u-boot-pocket-ds"; > + > + tca6424_vcc: regulator-tca6424-vcc { > + compatible = "regulator-fixed"; > + regulator-name = "tca6424_vcc"; > + > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 168 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_ts: vdd-ts { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_ts_en"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&tca6408 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > +}; > + > +&tlmm { > + gpio-reserved-ranges = <32 4>; > + panel_pwr_active: panel-pwr-active-state { > + pins = "gpio152", "gpio153"; > + function = "gpio"; > + drive-strength = <8>; > + bias-disable; > + output-high; > + }; > + > + sde_dsi1_active: sde-dsi1-active-state { > + pins = "gpio137"; > + function = "gpio"; > + drive-strength = <8>; > + bias-disable; > + output-high; > + }; > + > + sde_dsi1_suspend: sde-dsi1-suspend-state { > + pins = "gpio137"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + ts_rst_default: ts-rst-default-state { > + pins = "gpio24"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <8>; > + }; > + > + ts_rst_sleep: ts-rst-sleep-state { > + pins = "gpio24"; > + function = "gpio"; > + bias-pull-down; > + drive-strength = <2>; > + }; > + > + ts_int_default: ts-int-default-state { > + pins = "gpio25"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <8>; > + }; > + > + ts_int_sleep: ts-int-sleep-state { > + pins = "gpio25"; > + function = "gpio"; > + bias-pull-down; > + drive-strength = <2>; > + }; > + > + ts2_irq: ts2-irq-state { > + pins = "gpio39"; > + function = "gpio"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + ts2_reset: ts2-reset-state { > + pins = "gpio38"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-down; > + }; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + status = "okay"; > + > + tca6408: tca64_20@20 { > + gpio-controller; > + compatible = "ti,tca6408"; > + status = "okay"; > + reg = <0x20>; > + #gpio-cells = <0x02>; > + vcc-supply = <&tca6424_vcc>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen@5d { > + reg = <0x5d>; > + compatible = "goodix,gt911"; > + > + interrupt-parent = <&tlmm>; > + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; > + > + reset-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; > + irq-gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; > + VDDIO-supply = <&vdd_ts>; > + > + touchscreen-size-x = <768>; > + touchscreen-size-y = <1024>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts2_reset>, <&ts2_irq>; > + > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + touchscreen: touchscreen@38 { > + compatible = "focaltech,ft5426"; > + reg = <0x38>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > + > + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l14b_3p2>; > + iovcc-supply = <&vreg_l12b_1p8>; > + > + pinctrl-0 = <&ts_int_default &ts_rst_default>; > + pinctrl-1 = <&ts_int_sleep &ts_rst_sleep>; > + pinctrl-names = "default", "sleep"; > + > + touchscreen-size-x = <1080>; > + touchscreen-size-y = <1920>; > + }; > +}; > Why 2 touch controllers ? Thanks, Neil