From: Walker Chen <walker.chen@starfivetech.com>
To: Rob Herring <robh@kernel.org>
Cc: <linux-riscv@lists.infradead.org>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>,
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
Vinod Koul <vkoul@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
Emil Renner Berthing <kernel@esmil.dk>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 1/3] dt-bindings: dma: snps,dw-axi-dmac: Update resets and add snps,num-hs-if
Date: Mon, 13 Feb 2023 18:08:40 +0800 [thread overview]
Message-ID: <9f8c3242-762c-96a3-ad5b-e71e2321e7bf@starfivetech.com> (raw)
In-Reply-To: <20230207205800.GA4140140-robh@kernel.org>
On 2023/2/8 4:58, Rob Herring wrote:
> On Mon, Feb 06, 2023 at 07:38:09PM +0800, Walker Chen wrote:
>> Add two reset items and properties 'snps,num-hs-if'.
>> The DMA controller needs to be reset before being used in JH7110 SoC.
>> Another difference from the original version is that the hardware
>> handshake number of DMA can be up to 56 while the number in original
>> version is less than 16, and different registers are selected according
>> to this.
>>
>> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
>> ---
>> .../bindings/dma/snps,dw-axi-dmac.yaml | 17 ++++++++++++++++-
>> 1 file changed, 16 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
>> index 67aa7bb6d36a..1a8d8c20e254 100644
>> --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
>> +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
>> @@ -9,6 +9,7 @@ title: Synopsys DesignWare AXI DMA Controller
>> maintainers:
>> - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
>> - Jee Heng Sia <jee.heng.sia@intel.com>
>> + - Walker Chen <walker.chen@starfivetech.com>
>>
>> description:
>> Synopsys DesignWare AXI DMA Controller DT Binding
>> @@ -21,6 +22,7 @@ properties:
>> enum:
>> - snps,axi-dma-1.01a
>> - intel,kmb-axi-dma
>> + - starfive,axi-dma
>
> This should be SoC specific.
Well, so this should be 'starfive,jh7110-axi-dma'.
>
>>
>> reg:
>> minItems: 1
>> @@ -59,7 +61,12 @@ properties:
>> maximum: 8
>>
>> resets:
>> - maxItems: 1
>> + maxItems: 2
>> +
>> + reset-names:
>> + items:
>> + - const: axi-rst
>> + - const: ahb-rst
>
> '-rst' is redundant.
Okay, will be drop '-rst' in next version.
>
>>
>> snps,dma-masters:
>> description: |
>> @@ -74,6 +81,14 @@ properties:
>> $ref: /schemas/types.yaml#/definitions/uint32
>> enum: [0, 1, 2, 3, 4, 5, 6]
>>
>> + snps,num-hs-if:
>> + description: |
>> + The number of hardware handshake. If it is more than 16,
>> + CHx_CFG2 is used to configure the DMA transfer instead of CHx_CFG.
>
> Can't you infer this from the compatible string?
Yeah, maybe this is also feasible from the compatible string.
Thanks.
Best regards,
Walker
next prev parent reply other threads:[~2023-02-13 10:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 11:38 [PATCH v1 0/3] Add DMA driver for StarFive JH7110 SoC Walker Chen
2023-02-06 11:38 ` [PATCH v1 1/3] dt-bindings: dma: snps,dw-axi-dmac: Update resets and add snps,num-hs-if Walker Chen
2023-02-07 20:58 ` Rob Herring
2023-02-13 10:08 ` Walker Chen [this message]
2023-02-06 11:38 ` [PATCH v1 2/3] dma: dw-axi-dmac: Add support for StarFive DMA Walker Chen
2023-02-10 8:59 ` Vinod Koul
2023-02-13 13:08 ` Walker Chen
2023-02-15 1:22 ` Walker Chen
2023-02-06 11:38 ` [PATCH v1 3/3] riscv: dts: starfive: add dma controller node Walker Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9f8c3242-762c-96a3-ad5b-e71e2321e7bf@starfivetech.com \
--to=walker.chen@starfivetech.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).