From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Javier Carrasco <javier.carrasco.cruz@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH v2 4/4] dt-bindings: hwmon: Add Amphenol ChipCap 2
Date: Thu, 9 Nov 2023 10:20:05 +0100 [thread overview]
Message-ID: <9fb14ef2-ee2e-41c6-a080-01df2e947091@linaro.org> (raw)
In-Reply-To: <0b103837-54e7-430f-8a01-94b620b84f89@gmail.com>
On 09/11/2023 10:02, Javier Carrasco wrote:
>
>
> On 09.11.23 09:53, Krzysztof Kozlowski wrote:
>> On 08/11/2023 16:37, Javier Carrasco wrote:
>>> Add device tree bindings and an example for the ChipCap 2 humidity
>>> and temperature sensor.
>>>
>>> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
>>> ---
>>> .../bindings/hwmon/amphenol,chipcap2.yaml | 68 ++++++++++++++++++++++
>>> 1 file changed, 68 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
>>> new file mode 100644
>>> index 000000000000..8bb6daa293d3
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
>>> @@ -0,0 +1,68 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: ChipCap 2 humidity and temperature iio sensor
>>> +
>>> +maintainers:
>>> + - Javier Carrasco <javier.carrasco.cruz@gmail.com>
>>> +
>>> +description: |
>>> + Relative humidity and temperature sensor on I2C bus.
>>> +
>>> + Datasheets:
>>> + https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - amphenol,cc2dxx
>>> + - amphenol,cc2dxxs
>>> +
>>
>> Nothing improved.
>>
>> Really, you just ignored the review.
>>
>> Best regards,
>> Krzysztof
>>
> I am sorry if I missed something from your first review. I changed the
> interrupt description to have one per item as you suggested and removed
> the empty line. I did not change the compatible enum to add all part
> numbers because it was still under discussion, but now that I know that
> I have to add all of them, I will change for the next version.
And a new patch should not be sent while discussion happens. Literally I
had no chances to respond to your comment and v2 appears.
Best regards,
Krzysztof
next prev parent reply other threads:[~2023-11-09 9:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-08 15:37 [PATCH v2 0/4] hwmon: Add support for Amphenol ChipCap 2 Javier Carrasco
2023-11-08 15:37 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: add Amphenol Javier Carrasco
2023-11-09 8:53 ` Krzysztof Kozlowski
2023-11-08 15:37 ` [PATCH v2 2/4] hwmon: (core) Add support for humidity min/max alarm Javier Carrasco
2023-11-09 0:02 ` Guenter Roeck
2023-11-09 6:24 ` Javier Carrasco
2023-11-15 13:25 ` Guenter Roeck
2023-11-15 13:56 ` Javier Carrasco
2023-11-08 15:37 ` [PATCH v2 3/4] hwmon: Add support for Amphenol ChipCap 2 Javier Carrasco
2023-11-09 8:52 ` Krzysztof Kozlowski
2023-11-09 14:55 ` Guenter Roeck
2023-11-09 15:36 ` Javier Carrasco
2023-11-09 16:18 ` Krzysztof Kozlowski
2023-11-09 16:25 ` Guenter Roeck
2023-11-08 15:37 ` [PATCH v2 4/4] dt-bindings: hwmon: Add " Javier Carrasco
2023-11-09 8:53 ` Krzysztof Kozlowski
2023-11-09 9:02 ` Javier Carrasco
2023-11-09 9:20 ` Krzysztof Kozlowski [this message]
2023-11-09 9:25 ` Javier Carrasco
2023-11-09 17:28 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9fb14ef2-ee2e-41c6-a080-01df2e947091@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=javier.carrasco.cruz@gmail.com \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).