Re: [PATCH v6 10/12] reset: Add Nuvoton ma35d1 reset driver support

[Jacky Huang <ychuang570808@gmail.com>]

Dear Philipp,



On 2023/4/25 上午 04:02, Philipp Zabel wrote:
> Hi Jacky,
>
> On Tue, Mar 28, 2023 at 02:19:10AM +0000, Jacky Huang wrote:
>> From: Jacky Huang <ychuang3@nuvoton.com>
>>
>> This driver supports individual IP reset for ma35d1. The reset
>> control registers is a subset of system control registers.
>>
>> Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
>> ---
>>   drivers/reset/Kconfig        |   6 ++
>>   drivers/reset/Makefile       |   1 +
>>   drivers/reset/reset-ma35d1.c | 152 +++++++++++++++++++++++++++++++++++
>>   3 files changed, 159 insertions(+)
>>   create mode 100644 drivers/reset/reset-ma35d1.c
>>
> [...]
>> diff --git a/drivers/reset/reset-ma35d1.c b/drivers/reset/reset-ma35d1.c
>> new file mode 100644
>> index 000000000000..221299e7b873
>> --- /dev/null
>> +++ b/drivers/reset/reset-ma35d1.c
>> @@ -0,0 +1,152 @@
> [...]
>> +static int ma35d1_reset_update(struct reset_controller_dev *rcdev,
>> +			       unsigned long id, bool assert)
>> +{
>> +	unsigned int reg;
>> +	int ret;
>> +	int offset = (id / RST_PRE_REG) * 4;
>> +	struct ma35d1_reset_data *data =
>> +			container_of(rcdev, struct ma35d1_reset_data, rcdev);
>> +
>> +	ret = regmap_read(data->regmap, REG_SYS_IPRST0 + offset, &reg);
>> +	if (ret < 0)
>> +		return ret;
>> +	if (assert)
>> +		reg |= 1 << (id % RST_PRE_REG);
>> +	else
>> +		reg &= ~(1 << (id % RST_PRE_REG));
>> +
>> +	return regmap_write(data->regmap, REG_SYS_IPRST0 + offset, reg);
> This should use regmap_update_bits().
>
> [...]
>> +static int ma35d1_reset_status(struct reset_controller_dev *rcdev,
>> +			      unsigned long id)
>> +{
>> +	int reg, ret;
>> +	int offset = id / RST_PRE_REG;
> Should this be
>
> 	int offset = (id / RST_PRE_REG) * 4;
>
> ?

Yes, here is a coding mistake.
As the register offset was modified to be indexed by lookup table in v7, 
this
code was obsoleted.
Thank you for pointing out this.

>> +static int ma35d1_reset_probe(struct platform_device *pdev)
>> +{
>> +	int err;
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *parent;
>> +	struct ma35d1_reset_data *reset_data;
>> +	struct ma35d1_reboot_data *reboot_data;
>> +
>> +	if (!pdev->dev.of_node) {
>> +		dev_err(&pdev->dev, "Device tree node not found\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	reset_data = devm_kzalloc(dev, sizeof(*reset_data), GFP_KERNEL);
>> +	if (!reset_data)
>> +		return -ENOMEM;
>> +
>> +	reboot_data = devm_kzalloc(dev, sizeof(*reboot_data), GFP_KERNEL);
>> +	if (!reboot_data)
>> +		return -ENOMEM;
> These structures could be combined into one.

OK, we will combine them into one.

> regards
> Philipp

Best regards,
Jacky Huang