messages from 2016-01-11 10:36:39 to 2016-01-12 12:46:16 UTC [more...]
[PATCH v5 0/7] remoteproc: Add driver for STMicroelectronics platforms
2016-01-12 12:46 UTC (3+ messages)
` [PATCH v5 1/7] remoteproc: debugfs: Check of invalid 'count' value
` [PATCH v5 2/7] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
[RESEND PATCH 1/2] devicetree: mxsfb: add reset-active property
2016-01-12 12:44 UTC (3+ messages)
` [RESEND PATCH 2/2] video: mxsfb: manage LCD_RESET signal according to "
[PATCH V2 0/3] ASOC: bcm2835: move bcm2835-i2s to use clock framework
2016-01-12 12:35 UTC (4+ messages)
` [PATCH V2 1/3] ASoC: bcm2835: move to use the "
` [PATCH V2 2/3] ARM: bcm2835: I2S: use new register-range and "
` [PATCH V2 3/3] dt-bindings: bsm2835: fix bindings documentation to use new "
[RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics platforms
2016-01-12 12:30 UTC (13+ messages)
` [RESEND v4 2/6] remoteproc: debugfs: Add ability to boot remote processor using debugfs
[PATCH 00/23] HiSilicon SAS v2 hw support
2016-01-12 12:16 UTC (10+ messages)
` [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings
[PATCH v1 3/3] ARM64 LPC: update binding doc
2016-01-12 11:56 UTC (10+ messages)
[PATCH v2 1/1] USB: core: let USB device know device node
2016-01-12 11:54 UTC (2+ messages)
[PATCH] arm: dts: zynq: Add MicroZed board support
2016-01-12 11:47 UTC (5+ messages)
[PATCH v2 0/4] add reboot mode driver
2016-01-12 11:33 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: power: reset: add document for reboot-mode driver
` [PATCH v2 2/4] power: reset: add reboot mode driver
` [PATCH v2 3/4] ARM: dts: rockchip: add syscon-reboot-mode node
` [PATCH v2 4/4] ARM64: dts: rockchip: add syscon-reboot-mode DT node
[PATCH 1/2] input: gpio-keys: add support for disable button from DT
2016-01-12 11:32 UTC (2+ messages)
` [PATCH 2/2] input: gpio-keys: add support to name the gpio-keys
[PATCH 0/5] PCIe Xilinx with generic driver for Microblaze and
2016-01-12 11:31 UTC (8+ messages)
` [PATCH 1/5] PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
` [PATCH 2/5] PCI: xilinx: Removing struct hw_irq structure
` [PATCH 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze
` [PATCH 4/5] PCI: xilinx: Updating Zynq PCI binding documentation with Microblaze node
` [PATCH 5/5] Microblaze: Modifying microblaze PCI subsytem to support generic Xilinx AXI PCIe Host Bridge IP driver
[PATCH] rtc: max77xxx: fix of_table.cocci warnings
2016-01-12 11:27 UTC (2+ messages)
[PATCH v4 0/3] wlcore/wl12xx: spi: add wifi support to cm-t335
2016-01-12 11:24 UTC (7+ messages)
` [PATCH v4 1/3] wlcore/wl12xx: spi: add power operation function
` [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support
[PATCH 0/3] serial: earlycon: Add device-tree support for earlycon on Tegra
2016-01-12 10:56 UTC (5+ messages)
` [PATCH 1/3] serial: earlycon: Add device-tree support for other IO types
` [PATCH 2/3] serial: 8250_early: Add support for regshift
` [PATCH 3/3] serial: 8250_early: Add earlycon support for Tegra
[PATCH] pinctrl: max77620: fix platform_no_drv_owner.cocci warnings
2016-01-12 10:51 UTC
[PATCH] pinctrl: max77620: fix of_table.cocci warnings
2016-01-12 10:50 UTC
[PATCH] pinctrl: max77620: fix semicolon.cocci warnings
2016-01-12 10:49 UTC
[PATCH v3 0/6] Add clock support for Mediatek MT2701
2016-01-12 10:22 UTC (10+ messages)
` [PATCH v3 1/6] clk: mediatek: Refine the makefile to support multiple clock drivers
` [PATCH v3 2/6] dt-bindings: ARM: Mediatek: Document bindings for MT2701
` [PATCH v3 3/6] clk: mediatek: Add dt-bindings for MT2701 clocks
` [PATCH v3 4/6] clk: mediatek: Add MT2701 clock support
` [PATCH v3 5/6] reset: mediatek: Add MT2701 reset controller dt-binding file
` [PATCH v3 6/6] reset: mediatek: Add MT2701 reset driver
[PATCH V6 0/6] i2c: qup: Add support for v2 tags and bam dma
2016-01-12 10:19 UTC (8+ messages)
` [PATCH V6 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts
` [PATCH V6 2/6] i2c: qup: Add V2 tags support
` [PATCH V6 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
` [PATCH V6 4/6] i2c: qup: Add bam dma capabilities
` [PATCH V6 5/6] dts: msm8974: Add blsp2_bam dma node
` [PATCH V6 6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node
[PATCH v3 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
2016-01-12 9:46 UTC (3+ messages)
` [PATCH v3 1/2] "
` [PATCH v3 2/2] mfd: add documentation for ACT8945A DT bindings
[patch 1/2 -next] mdio: remove an unneed condition
2016-01-12 9:35 UTC
[PATCH v5 0/6] ARM: hisi: Add initial support including clock driver for Hi3519 soc
2016-01-12 9:28 UTC (10+ messages)
` [PATCH v5 5/6] mfd: dt-bindings: add device tree bindings for Hi3519 sysctrl
[PATCH v2 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
2016-01-12 9:26 UTC (7+ messages)
` [PATCH v2 1/2] "
` [PATCH v2 2/2] mfd: add documentation for ACT8945A DT bindings
[PATCH V2 0/6] Add support for MAXIM MAX77620/MAX20024 PMIC
2016-01-12 9:17 UTC (7+ messages)
` [PATCH V2 1/6] DT: mfd: add device-tree binding doc fro PMIC max77620/max20024
` [PATCH V2 2/6] mfd: max77620: add core driver for MAX77620/MAX20024
` [PATCH V2 3/6] pinctrl: max77620: add pincontrol "
` [PATCH V2 4/6] gpio: max77620: add gpio "
` [PATCH V2 5/6] rtc: max77xxx: add RTC driver for Maxim MAX77xxx series RTC IP
` [PATCH V2 6/6] regulator: max77620: add regulator driver for max77620/max20024
[PATCH v3 0/3] SoC: rockchip: support power domain for RK3368
2016-01-12 8:57 UTC (9+ messages)
` [PATCH v3 1/3] dt-bindings: add power-domain header for RK3368 SoCs
` [PATCH v3 2/3] soc: rockchip: power-domain: Modify power domain driver for rk3368
` [PATCH v3 3/3] dt-bindings: modify document of Rockchip power domains
[PATCH 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
2016-01-12 8:53 UTC (10+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] mfd: add documentation for ACT8945A DT bindings
[PATCH v2 0/2] regulator: act8945a: add regulator driver for the sub-device of ACT8945A MFD
2016-01-12 8:17 UTC (3+ messages)
` [PATCH v2 1/2] regulator: act8945a: add regulator driver for ACT8945A
` [PATCH v2 2/2] regulator: add documentation for ACT8945A's regulator DT bindings
[PATCH 0/2] regulator: act8945a: add regulator driver for the sub-device of ACT8945A MFD
2016-01-12 7:55 UTC (4+ messages)
` [PATCH 2/2] regulator: add documentation for ACT8945A's regulator DT bindings
[PATCH v6 0/9] mfd: axp20x: Add support for RSB based AXP223
2016-01-12 7:39 UTC (11+ messages)
` [PATCH v6 4/9] mfd: axp20x: Split the driver into core and i2c bits
` [PATCH v6 6/9] mfd: axp20x: Add support for RSB based AXP223 PMIC
[PATCH v2 0/9] Support TI LMU devices
2016-01-12 7:37 UTC (8+ messages)
` [PATCH v2 6/9] mfd: add TI LMU hardware fault monitoring driver
` [PATCH v2 7/9] backlight: add TI LMU backlight driver
[PATCH 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller
2016-01-12 4:59 UTC (4+ messages)
` [2/2] "
[PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver
2016-01-12 4:41 UTC (9+ messages)
` [PATCH V10 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller
[PATCH v2 1/4] Documentation: fsl-quadspi: Add fsl,ls2080a-dspi compatible string
2016-01-12 4:36 UTC (5+ messages)
[PATCH v2] dtc: create tool to diff device trees
2016-01-12 4:31 UTC (4+ messages)
[PATCH 0/6] Add support for MAXIM MAX77620/MAX20024 PMIC
2016-01-12 3:51 UTC (14+ messages)
` [PATCH 5/6] rtc: max77620: add support for max77620/max20024 RTC driver
` [rtc-linux] "
[PATCH 1/2] devicetree: mxsfb: add reset-active property
2016-01-12 0:28 UTC (6+ messages)
[RESEND][PATCHv2 0/3] Devicetree bindings for Ion
2016-01-12 0:26 UTC (7+ messages)
` [RESEND][PATCHv2 1/3] ion: "
` [RESEND][PATCHv2 3/3] NOMERGE: Sample driver
` [RESEND][PATCHv2 2/3] staging: ion: Add files for parsing the devicetree
[PATCH 1/3] ARM: dts: omap5-board-common: enable rtc and charging of backup battery
2016-01-12 0:09 UTC (12+ messages)
[PATCH v3 0/3] Add device tree support to the cyttsp driver
2016-01-11 23:51 UTC (10+ messages)
` [PATCH v3 2/3] Input: cyttsp - add device tree bindings
` [PATCH v3 3/3] Input: cyttsp - add default init function
[PATCH V3] cpufreq: qoriq: Register cooling device based on device tree
2016-01-11 21:13 UTC (6+ messages)
` 答复: "
[PATCH V2 0/4] clk: bcm2835: add additinal clocks and add frac support
2016-01-11 21:01 UTC (6+ messages)
` [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835
` [PATCH V2 2/4] clk: bcm2835: enable fractional and mash support
` [PATCH V2 3/4] clk: bcm2835: enable management of PCM clock
` [PATCH V2 4/4] clk: bcm2835: add missing 22 HW-clocks
[PATCH] ata: add AMD Seattle platform driver
2016-01-11 18:56 UTC (9+ messages)
[PATCH 0/2] ata: Introduce the AHCI_HFLAG_EDGE_IRQ_BROKEN in libahci and enabling it for ahci_xgene driver
2016-01-11 16:16 UTC (4+ messages)
` [PATCH 1/2] libahci: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT
[PATCH 1/1] USB: core: let USB device know device node
2016-01-11 16:11 UTC (2+ messages)
[PATCH v2 0/9] ARM: dts: Add compatible property to "partitions" node
2016-01-11 16:07 UTC (5+ messages)
[PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver
2016-01-11 15:25 UTC (8+ messages)
` [PATCH V2 2/2] serial: bcm2835: add driver for bcm2835-aux-uart
` [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation "
ION DTS changes for HiKey in -next
2016-01-11 15:18 UTC (4+ messages)
[PATCH v12 0/7] dma: add Qualcomm Technologies HIDMA driver
2016-01-11 14:45 UTC (8+ messages)
` [PATCH V12 1/7] dma: qcom_bam_dma: move to qcom directory
` [PATCH V12 2/7] dma: hidma: Add Device Tree support
` [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
` [PATCH V12 4/7] dma: add Qualcomm Technologies HIDMA channel driver
` [PATCH V12 5/7] dma: qcom_hidma: implement lower level hardware interface
` [PATCH V12 6/7] dma: qcom_hidma: add debugfs hooks
` [PATCH V12 7/7] dma: qcom_hidma: add support for object hierarchy
[PATCH linux-next v2 00/14] mtd: spi-nor: add driver for Atmel QSPI controller
2016-01-11 14:30 UTC (7+ messages)
` [PATCH linux-next v2 02/14] mtd: spi-nor: properly detect the memory when it boots in Quad or Dual mode
` [PATCH linux-next v2 03/14] mtd: spi-nor: select op codes and SPI NOR protocols by manufacturer
[PATCH 0/5] ASOC: bcm2835: move bcm2835-i2s to use clock framework
2016-01-11 13:53 UTC (5+ messages)
` [PATCH 2/5] clk: bcm2835: enable management of PCM clock
[PATCH v2 00/12] Add the family patches to support for kylin board
2016-01-11 13:38 UTC (4+ messages)
` [PATCH v2 03/12] ARM: dts: rockchip: override the clocks in i2s "
[PATCH v4 0/4] Add support for NXP LPC18xx EEPROM using nvmem
2016-01-11 12:15 UTC (2+ messages)
[PATCH] ARM: dts: Allow simultaneous usage exynos-rng and s5p-sss drivers on exynos5
2016-01-11 11:40 UTC
[PATCH] ARM: dts: rockchip: Add support emac for RK3036
2016-01-11 11:36 UTC (2+ messages)
[PATCH] arm64: Add DT support for Juno r2 board
2016-01-11 11:12 UTC (7+ messages)
[PATCH 0/5] ARM: dts: sunxi: Add backlight node to q8 tablets
2016-01-11 11:09 UTC (5+ messages)
` "
` [linux-sunxi] "
[PATCH v3 1/4] extcon: arizona: Remove enable/disable of 32k clock
2016-01-11 11:03 UTC (4+ messages)
` [PATCH v3 3/4] mfd: arizona: Switch to using clock driver for "
[PATCH] gpio: max77620: fix of_table.cocci warnings
2016-01-11 10:48 UTC
[PATCH] arm64/dts: Add missing DMA Abort interrupt to Juno
2016-01-11 10:47 UTC (4+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).