messages from 2016-10-07 05:25:13 to 2016-10-08 03:28:01 UTC [more...]
[v12, 0/8] Fix eSDHC host version register bug
2016-10-08 3:28 UTC (2+ messages)
[PATCH 0/10] mmc: Add support to Marvell Xenon SD Host Controller
2016-10-08 2:44 UTC (15+ messages)
` [PATCH 1/10] mmc: sdhci: Export sdhci_set_ios() from sdhci.c
` [PATCH 5/10] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
` [PATCH 6/10] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
` [PATCH 8/10] arm64: dts: marvell: add eMMC support for Armada 37xx
` [PATCH 9/10] arm64: dts: marvell: add sdhci support for Armada 7K/8K
` [PATCH 10/10] arm64: configs: enable SDHCI driver for Xenon
` [PATCH 2/10] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
` [PATCH 3/10] mmc: sdhci: Export sdhci_execute_tuning() "
` [PATCH 4/10] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
` [PATCH 7/10] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC
[PATCH v3 0/11] Add R8A7743/SK-RZG1M board support
2016-10-08 2:31 UTC (13+ messages)
` [PATCH v3 03/11] ARM: shmobile: r8a7743: basic SoC support
` [PATCH v3 04/11] ARM: dts: r8a7743: initial SoC device tree
[PATCH 00/10] Introduce Juniper PTXPMB CPLD driver
2016-10-08 2:17 UTC (13+ messages)
` [PATCH 01/10] mfd: Juniper PTXPMB CPLD Multi-function core driver
` [PATCH 02/10] mfd: ptxpmb-cpld: Add documentation for PTXPMB CPLD
` [PATCH 03/10] watchdog: Add support for PTXPMB CPLD watchdog
` [PATCH 04/10] watchdog: ptxpmb-wdt: Add ptxpmb-wdt device tree bindings
` [PATCH 05/10] i2c/muxes: Juniper's PTXPMB CPLD I2C multiplexer
` [PATCH 06/10] i2c: i2c-mux-ptxpmb-cpld: Add device tree bindings
` [PATCH 07/10] gpio: ptxpmb-cpld: Add support for PTXPMB CPLD's GPIO
` [PATCH 08/10] gpio: ptxpmb-cpld: Document bindings of PTXPMB's CPLD GPIO
` [PATCH 09/10] mtd: devices: Add driver for memory mapped NVRAM on FPC
` [PATCH 10/10] mtd: ngpmb_nvram: Add bindings for Juniper's ngpmb NVRAM
[PATCH v5] drm/fsl-dcu: Implement gamma_lut atomic crtc properties
2016-10-08 2:16 UTC (3+ messages)
[PATCH v7 0/2] J-Core timer support
2016-10-08 1:32 UTC (10+ messages)
` [PATCH v7 2/2] clocksource: add J-Core timer/clocksource driver
[PATCH V1 04/10] watchdog: da9061: watchdog driver (RFC)
2016-10-08 0:22 UTC (7+ messages)
[RESEND PATCH v2 0/3] Broadcom AVS CPUfreq driver
2016-10-07 23:22 UTC (2+ messages)
[PATCH v3 0/3] Broadcom STB AVS CPUfreq driver
2016-10-07 23:21 UTC (4+ messages)
` [PATCH v3 1/3] dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq
` [PATCH v3 2/3] cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs
` [PATCH v3 3/3] cpufreq: brcmstb-avs-cpufreq: add debugfs support
[PATCH v2 5/8] dt/bindings: Update binding for PM domain idle states
2016-10-07 22:36 UTC
[PATCH] arm64: dts: rename ns2.txt to brcm,ns2.txt
2016-10-07 21:29 UTC
[PATCH 00/10] Introduce Juniper SAM FPGA driver
2016-10-07 21:13 UTC (12+ messages)
` [PATCH 01/10] mfd: Add Juniper SAM FPGA MFD driver
` [PATCH 02/10] mfd: sam: Add documentation for the SAM FPGA
` [PATCH 03/10] i2c: Juniper SAM I2C driver
` [PATCH 10/10] net: mdio-sam: Add device tree documentation for SAM MDIO
` [PATCH 04/10] i2c: i2c-sam: Add device tree bindings
` [PATCH 05/10] gpio: Introduce SAM gpio driver
` [PATCH 06/10] gpio: sam: Document bindings of SAM FPGA GPIO block
` [PATCH 07/10] mtd: Add SAM Flash driver
` [PATCH 08/10] mtd: flash-sam: Bindings for Juniper's SAM FPGA flash
` [PATCH 09/10] net: phy: Add MDIO driver for Juniper's SAM FPGA
[PATCH 1/3] fpga manager: Add cyclonespi driver for Altera fpgas
2016-10-07 20:54 UTC (8+ messages)
` [PATCH 2/3] doc: dt: add cyclone-spi binding document
[PATCH v2 0/2] Renesas R8A7743 CPG/MSSR clock support
2016-10-07 20:47 UTC (3+ messages)
` [PATCH v2 1/2] ARM: shmobile: r8a7743: add CPG clock index macros
` [PATCH v2 2/2] clk: renesas: cpg-mssr: add R8A7743 support
[PATCH 0/6] Introduce Juniper CBC FPGA
2016-10-07 20:37 UTC (11+ messages)
` [PATCH 1/6] mfd: Add support for the PTX1K "
` [PATCH 2/6] gpio: Add support for PTX1K CBC FPGA spare GPIOs
` [PATCH 3/6] gpio: gpio-cbc: Document bindings of CBC FPGA GPIO block
` [PATCH 4/6] gpio: cbc-presence: Add CBC presence detect as GPIO driver
` [PATCH 5/6] gpio: gpio-cbc-presense: Document bindings of CBC FPGA presence
` [PATCH 6/6] staging: jnx: CBD-FPGA infrastructure
[PATCH 0/3] Renesas R8A7743 CPG/MSSR clock support
2016-10-07 20:35 UTC (6+ messages)
` [PATCH 2/3] ARM: shmobile: r8a7743: add CPG clock index macros
[RFC 0/2] Juniper DT based connector driver
2016-10-07 18:57 UTC (6+ messages)
` [RFC 1/2] staging: jnx: Add Juniper "
` [RFC 2/2] staging: jnx-connector: add device tree binding
[RFC 0/2] Add device tree property and quirk for supporting sdhci
2016-10-07 18:56 UTC (8+ messages)
` [RFC 1/2] sdhci: Add device tree property sd-broken-highspeed
[PATCHv1] hwmon: Add tc654 driver
2016-10-07 18:29 UTC (3+ messages)
` [PATCHv2] "
[PATCH V1 00/10] da9061: DA9061 driver submission
2016-10-07 17:48 UTC (4+ messages)
` [PATCH V1 05/10] thermal: da9062/61: Thermal junction temperature monitoring driver
[PATCH v9 00/19] Add support for FDMA DMA controller and slim core rproc found on STi chipsets
2016-10-07 17:44 UTC (8+ messages)
` [PATCH v9 17/19] drm/virtio: kconfig: Fix recursive dependency issue
[PATCH/RFT 00/12] Add DT support for ohci-da8xx
2016-10-07 17:11 UTC (14+ messages)
` [PATCH/RFT 01/12] ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable
` [PATCH/RFT 02/12] ARM: davinci: hawk: add full constraints for ohci plat boot
` [PATCH/RFT 03/12] ARM: davinci: rename root_hub to platform_data
` [PATCH/RFT 04/12] USB: ohci-da8xx: Divide power up time in the ohci driver
` [PATCH/RFT 05/12] USB: ohci-da8xx: Fix probe for devices with no vbus/oci gpio
` [PATCH/RFT 06/12] ARM: davinci: hawk: Remove oci and vbus gpios
` [PATCH/RFT 07/12] USB: ohci-da8xx: Request gpios and handle interrupt in the driver
` [PATCH/RFT 10/12] USB: ohci-da8xx: Add device tree support
` [PATCH/RFT 11/12] ARM: dts: da850: Add the usb ohci device node
` [PATCH/RFT 08/12] ARM: davinci: register the usb20_phy clock on the SoC file
` [PATCH/RFT 09/12] usb: host: ohci-da8xx: Add devicetree bindings documentation
` [PATCH/RFT 12/12] ARM: dts: da850-lcdk: enable ohci usb
[PATCH 0/3] mtd: s3c2410: add device tree support
2016-10-07 16:28 UTC (5+ messages)
` [PATCH 1/3] mtd: s3c2410: make ecc mode configurable via platform data
` [PATCH 3/3] mtd: s3c2410: parse the device configuration from OF node
[PATCH 0/7] Introduce PTX1K Boot FPGA driver
2016-10-07 15:22 UTC (8+ messages)
` [PATCH 1/7] mfd: Add PTX1K I2CS BootFPGA MFD driver
` [PATCH 2/7] mfd: dt-bindings: Add bindings for the Juniper PTX1K Boot FPGA
` [PATCH 3/7] watchdog: Add PTX1K I2CS BootFPGA watchdog driver
` [PATCH 4/7] watchdog: ptx1kbf-wdt: Add ptx1kbf device tree bindings
` [PATCH 5/7] mtd: ptx1kbf: Add PTX1K BootFPGA MTD driver
` [PATCH 6/7] mtd: ptx1kbf: Bindings for Juniper's PTX1K Boot FPGA
` [PATCH 7/7] hwmon: ptx1kbf: Add PTX1K I2CS BootFPGA sensor driver
[PATCH 00/10] Introduce Juniper I2CS FPGA driver
2016-10-07 15:21 UTC (11+ messages)
` [PATCH 02/10] mfd: dt-bindings: Add bindings for the Juniper I2CS MFD
` [PATCH 01/10] mfd: Add Juniper I2CS MFD driver
` [PATCH 03/10] i2c/muxes: Juniper I2CS RE mux
` [PATCH 08/10] leds: Add binding for Juniper's I2CS FPGA
` [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings
` [PATCH 05/10] gpio: i2cs: Juniper I2CS to GPIO pin mapping driver
` [PATCH 06/10] gpio: gpio-i2cs: Document bindings of I2CS FPGA GPIO block
` [PATCH 07/10] leds: i2cs: Add I2CS FPGA leds driver
` [PATCH 09/10] hwmon: Add driver for Fan Tray on Juniper I2CS FGPA
` [PATCH 10/10] hwmon: i2cs-fan: Add hwmon dts binding documentation
[PATCH 0/4] Introduce Juniper PTXPMB Extended driver
2016-10-07 15:19 UTC (5+ messages)
` [PATCH 2/4] mfd: ptxpmb-ext-cpld: Add documentation for PTXPMB extended CPLD
` [PATCH 1/4] mfd: ptxpmb: Add separate driver for "
` [PATCH 3/4] gpio: ptxpmb-ext-cpld: Add driver for Juniper's PTXPMB "
` [PATCH 4/4] gpio: ptxpmb-ext-cpld: Document bindings of "
[PATCH 0/3] Juniper prerequisites
2016-10-07 15:15 UTC (4+ messages)
` [PATCH 1/3] Documentation: vendor-prefixes: Add DT vendor entry "jnx"
` [PATCH 2/3] uapi: jnx: Export board types to user space
` [PATCH 3/3] jnx: Introduce board_ids.h
[PATCH v2] ARM64: dts: meson-gxbb: Add rmii pinctrl node and rename rgmii node
2016-10-07 15:12 UTC (2+ messages)
[PATCH v3 0/6] Support PWM polarity control
2016-10-07 15:11 UTC (7+ messages)
` [PATCH v3 1/6] pwm: print error messages with pr_err() instead of pr_debug()
` [PATCH v3 2/6] pwm: core: make the PWM_POLARITY flag in DTB optional
` [PATCH v3 3/6] pwm: imx: support output polarity inversion
` [PATCH v3 4/6] arm: dts: imx7: Update #pwm-cells for PWM polarity control
` [PATCH v3 5/6] arm: dts: imx7-colibri: Use pwm "
` [PATCH v3 6/6] arm: dts: imx7-colibri: Use enable-gpios for BL_ON
[PATCH v4 00/10] net-next: ethernet: add sun8i-emac driver
2016-10-07 15:02 UTC (12+ messages)
` [PATCH v4 01/10] "
` [PATCH v4 02/10] MAINTAINERS: Add myself as maintainer of sun8i-emac
` [PATCH v4 03/10] ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac
` [PATCH v4 04/10] ARM: dts: sun8i-h3: Add dt node for the syscon control module
` [PATCH v4 05/10] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver
` [PATCH v4 06/10] ARM: dts: sun8i: Enable sun8i-emac on the Orange PI PC
` [PATCH v4 07/10] ARM: dts: sun8i: Enable sun8i-emac on the Orange PI One
` [PATCH v4 08/10] ARM: dts: sun8i: Enable sun8i-emac on the Orange Pi 2
` [PATCH v4 09/10] ARM: sunxi: Enable sun8i-emac driver on sunxi_defconfig
` [PATCH v4 10/10] ARM: sunxi: Enable sun8i-emac driver on multi_v7_defconfig
[PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support
2016-10-07 14:44 UTC (7+ messages)
` [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming
` [PATCH 5/7] ARM: dts: am437x-idk: Add Industrial output support
` [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support
` [PATCH 7/7] ARM: dts: am57xx-idk: Add Industrial output support
` [PATCH 3/7] ARM: dts: am335x-icev2: Add ADC support
` [PATCH 4/7] ARM: dts: am437x-idk: Add Industrial input support
[PATCH] ARM64: dts: meson-gx: Add missing L2 cache node
2016-10-07 14:43 UTC (2+ messages)
[PATCH v6 0/6] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
2016-10-07 14:21 UTC (2+ messages)
[PATCH v2 0/2] ARM64: meson-gxbb: Add support for the Nexbox A95X Board
2016-10-07 13:44 UTC (2+ messages)
(unknown),
2016-10-07 13:42 UTC (9+ messages)
` [PATCH v5 2/5] drm/bridge: Add RGB to VGA bridge support
[RESEND PATCH v2 -next 0/3] ARM64: amlogic: Add support for GXL SoC Family
2016-10-07 13:33 UTC (2+ messages)
[PATCH v7 1/3] Documentation: dt: net: add ath9k wireless device binding
2016-10-07 12:17 UTC (4+ messages)
` [v7, "
[PATCH 0/9] pinctrl: sunxi: Generic bindings rework
2016-10-07 9:11 UTC (10+ messages)
` [PATCH 4/9] pinctrl: sunxi: Deal with configless pins
` [PATCH 6/9] dt-bindings: pinctrl: Deprecate sunxi pinctrl bindings
` [PATCH 7/9] ARM: sunxi: Remove useless allwinner,drive property
[PATCH 1/1] input: pwm-beeper: add feature to set volume via sysfs
2016-10-07 9:08 UTC (7+ messages)
` [PATCH v2 0/3] input: pwm-beeper: add feature to set volume level
` [PATCH v2 1/3] input: pwm-beeper: add feature to set volume via sysfs
` [PATCH v2 2/3] input: pwm-beeper: add documentation for volume devicetree bindings
` [PATCH v2 3/3] input: pwm-beeper: add devicetree bindings to set volume levels
[PATCH 0/9] drm/sun4i: Support first display pipeline on sun6i
2016-10-07 8:57 UTC (9+ messages)
` [PATCH 2/9] drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure
` [PATCH 3/9] drm/sun4i: Put dotclock range into tcon quirks and check against them
` [PATCH 4/9] drm/sun4i: Add compatible string for A31/A31s TCON (timing controller)
` [PATCH 6/9] ARM: dts: sun6i: Sort pinmux setting nodes
[PATCH 00/14] ASoc: sunxi: Add Allwinner A33 codec driver
2016-10-07 8:35 UTC (2+ messages)
[PATCH v2 0/6] Support PWM polarity control
2016-10-07 6:41 UTC (5+ messages)
` [PATCH v2 5/6] arm: dts: imx7-colibri: Use pwm "
[PATCH v4 0/5] powerpc/mm: movable hotplug memory nodes
2016-10-07 6:40 UTC (5+ messages)
` [PATCH v4 4/5] mm: make processing of movable_node arch-specific
` [PATCH v4 5/5] mm: enable CONFIG_MOVABLE_NODE on non-x86 arches
[PATCH] phy: nop: Add a new phy driver for No-Op transceiver
2016-10-07 6:23 UTC (3+ messages)
[PATCH V5 00/10] dmaengine: qcom_hidma: add MSI interrupt support
2016-10-07 5:25 UTC (4+ messages)
` [PATCH V5 08/10] dmaengine: qcom_hidma: protect common data structures
` [PATCH V5 09/10] dmaengine: qcom_hidma: break completion processing on error
` [PATCH V5 10/10] dmaengine: qcom_hidma: add MSI support for interrupts
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).