messages from 2017-10-11 08:16:55 to 2017-10-12 10:57:05 UTC [more...]
[PATCH v3 0/2] NVIDIA Tegra20 video decoder driver
2017-10-12 10:57 UTC (9+ messages)
` [PATCH v3 1/2] staging: Introduce "
` [PATCH v3 2/2] ARM: dts: tegra20: Add video decoder node
[PATCH v5 0/4] phy: rcar-gen3-usb2: add support for r8a77995
2017-10-12 10:47 UTC (4+ messages)
` [PATCH v5 2/4] phy: rcar-gen3-usb2: use enum phy_mode in the role_store()
[PATCH v2 0/5] GPIO driver for Maxim MAX3191x
2017-10-12 10:40 UTC (4+ messages)
` [PATCH v2 5/5] gpio: Add driver for Maxim MAX3191x industrial serializer
` [PATCH v2 4/5] dt-bindings: gpio: max3191x: Document new driver
` [PATCH v2 3/5] dt-bindings: Document common property for daisy-chained devices
[PATCH 0/5] Add USB2.0 Host support
2017-10-12 10:15 UTC (12+ messages)
` [PATCH 1/5] ARM: dts: r8a7745: Add internal PCI bridge nodes
` [PATCH 2/5] ARM: dts: r8a7745: Add USB PHY DT support
` [PATCH 3/5] ARM: dts: r8a7745: Link PCI USB devices to USB PHY
` [PATCH 4/5] ARM: dts: iwg22d-sodimm: Enable internal PCI
` [PATCH 5/5] ARM: dts: iwg22d-sodimm: Enable USB PHY
[PATCH] clk: renesas: rz: clk-rz is meant for RZ/A1
2017-10-12 9:37 UTC
[PATCH 00/13] ARM: dts: renesas: Add missing clocks for ARM CPU cores
2017-10-12 9:35 UTC (14+ messages)
` [PATCH 01/13] dt-bindings: clk: r7s72100: Add missing I and G clocks
` [PATCH 02/13] ARM: dts: r7s72100: Add clock for CA9 CPU core
` [PATCH 03/13] ARM: dts: r8a73a4: Add clock for CA15 CPU0 core
` [PATCH 04/13] ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core
` [PATCH 06/13] ARM: dts: r8a7779: Add clocks for CA9 CPU cores
` [PATCH 07/13] ARM: dts: r8a7790: Add missing clocks for secondary CA15 "
` [PATCH 08/13] ARM: dts: r8a7790: Add clocks for CA7 "
` [PATCH 09/13] ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core
` [PATCH 10/13] ARM: dts: r8a7792: "
` [PATCH 13/13] ARM: dts: sh73a0: Add clocks for CA9 CPU cores
` [PATCH 05/13] ARM: dts: r8a7778: Add clock for CA9 CPU core
` [PATCH 11/13] ARM: dts: r8a7793: Add missing clock for secondary CA15 "
` [PATCH 12/13] ARM: dts: r8a7794: Add missing clock for secondary CA7 "
[PATCH] arm64: dts: renesas: salvator-common: add dr_mode property for USB2.0 channel 0
2017-10-12 9:23 UTC
[PATCHv4 0/7] Fix remaining issues to drop more omap platform data
2017-10-12 9:10 UTC (7+ messages)
` [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
[PATCH v2 0/7] pinctrl: mcp32s08: add support for mcp23018
2017-10-12 9:04 UTC (8+ messages)
` [PATCH v2 5/7] pinctrl: mcp23s08: add open drain configuration for irq pinctrl
` [PATCH v2 6/7] pinctrl: mcp23s08: remove hardcoded irq polarity in irq_setup
` [PATCH v2 7/7] pinctrl: mcp23s08: remove unused variables from pinconf_set
[PATCHv2 0/7] Add support for USB OTG on STM32F7
2017-10-12 8:43 UTC (9+ messages)
[PATCH 0/5] arm64: add ls1012a and ls1046a pcie support
2017-10-12 8:41 UTC (4+ messages)
[PATCH] ARM: dts: sun5i: reference-design-tablet: Enable AXP209 AC and battery
2017-10-12 8:14 UTC (2+ messages)
[PATCH] gpio-rcar: document R8A77970 bindings
2017-10-12 8:04 UTC (2+ messages)
[PATCH v2] drivers/irqchip: gicv3: add workaround for Synquacer pre-ITS
2017-10-12 7:49 UTC (2+ messages)
[PATCH v3 2/5] clk: samsung: Add dt bindings for Exynos4412 ISP clock controller
2017-10-12 7:08 UTC (4+ messages)
[PATCH v6 0/4] phy: rcar-gen3-usb2: add support for r8a77995
2017-10-12 6:34 UTC (5+ messages)
` [PATCH v6 1/4] phy: rcar-gen3-usb2: check dr_mode for otg mode
` [PATCH v6 2/4] phy: rcar-gen3-usb2: use enum phy_mode in the role_store()
` [PATCH v6 3/4] phy: rcar-gen3-usb2: add SoC-specific parameter for dedicated pins
` [PATCH v6 4/4] phy: rcar-gen3-usb2: add binding for r8a77995
[PATCH v2 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code
2017-10-12 6:19 UTC (6+ messages)
` [PATCH v2 1/5] dt-bindings: phy: Add PHY_TYPE_UFS definition
` [PATCH v2 2/5] phy: Add UFS PHY modes
` [PATCH v2 3/5] phy: qcom-ufs: Add support to set phy mode
` [PATCH v2 4/5] scsi/ufs: qcom: Set phy mode based on the controllers HS MODE
` [PATCH v2 5/5] ufs/phy: qcom: Refactor to use phy_init call
[PATCH v2 0/4] TDA1997x HDMI video receiver
2017-10-12 4:45 UTC (5+ messages)
` [PATCH v2 1/4] MAINTAINERS: add entry for NXP TDA1997x driver
` [PATCH v2 2/4] media: dt-bindings: Add bindings for TDA1997X
` [PATCH v2 3/4] media: i2c: Add TDA1997x HDMI receiver driver
` [PATCH v2 4/4] ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx
[PATCH v3 0/9] Add PMIC support to MediaTek MT7622 SoC
2017-10-12 3:44 UTC (7+ messages)
` [PATCH v3 5/9] soc: mediatek: pwrap: add pwrap_write32 for writing in 32-bit mode
` [PATCH v3 7/9] soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
[PATCH v3 00/12] add pinmuxing support for pins in AXP209 and AXP813 PMICs
2017-10-12 2:22 UTC (10+ messages)
` [PATCH v3 12/12] ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs
PCI: brcmstb: Add Broadcom Settopbox PCIe support
2017-10-12 0:55 UTC (11+ messages)
` [PATCH 1/9] SOC: brcmstb: add memory API
` [PATCH 2/9] PCI: host: brcmstb: add DT docs for Brcmstb PCIe device
` [PATCH 3/9] PCI: host: brcmstb: Broadcom PCIe Host Controller
` [PATCH 4/9] arm64: dma-mapping: export symbol arch_setup_dma_ops
` [PATCH 5/9] PCI: host: brcmstb: add dma-ranges for inbound traffic
` [PATCH 6/9] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for MIPS
` [PATCH 7/9] PCI: host: brcmstb: add MSI capability
` [PATCH 8/9] MIPS: BMIPS: add PCI bindings for 7425, 7435
` [PATCH 9/9] MIPS: BMIPS: enable PCI
[PATCH 0/3] phy: brcm-sata: Allow RX equalizer tuning
2017-10-12 0:53 UTC (4+ messages)
` [PATCH 1/3] dt-bindings: phy: Add RX equalizer properties for Broadcom SATA PHY
` [PATCH 2/3] phy: brcm-sata: Prepare for doing more tuning
` [PATCH 3/3] phy: brcm-sata: Allow RX equalizer tuning
[PATCH] ARM64: dts: meson-gxm: enable HS400 on the vim2
2017-10-12 0:22 UTC (2+ messages)
[PATCH 0/5] Enable DRA7 processor MMU DT nodes
2017-10-11 21:51 UTC (4+ messages)
` [PATCH 1/5] ARM: dts: dra7-evm-common: Enable relevant IPU and DSP MMU nodes
[PATCH V2] imx: mx7dsabresd: include BLK for MMC/eMMC support of driver model
2017-10-11 21:41 UTC (2+ messages)
[PATCH v2 0/3] Altera ASMI Parallel II IP Core
2017-10-11 21:06 UTC (5+ messages)
` [PATCH v2 2/3] mtd: spi-nor: "
[PATCH] dt-bindings: Add vendor prefix for Opal Kelly Inc
2017-10-11 18:57 UTC
linux-next: Tree for Oct 9th (of: unittest: testcases)
2017-10-11 18:11 UTC (3+ messages)
[PATCH] of: Devices with pci_epf_bus_type require DMA configuration
2017-10-11 16:45 UTC (3+ messages)
[PATCH] dt-bindings: PCI: rcar: Correct example to match reality
2017-10-11 16:13 UTC (2+ messages)
[PATCH 0/4] Make max expected current configurable for ina2xx drivers
2017-10-11 15:59 UTC (9+ messages)
` [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
[PATCH] rtc: add support for NXP PCF85363 real-time clock
2017-10-11 15:56 UTC (4+ messages)
` [PATCH V2] "
[PATCH] ARM: dts: omap3: Replace deprecated mcp prefix
2017-10-11 15:47 UTC (2+ messages)
[PATCH 0/2] dra7/omap5: Increase max-voltage of pbias to 3.3v
2017-10-11 15:46 UTC (2+ messages)
[PATCH] ARM: dts: dra7-evm: Move pcie RC node to common file
2017-10-11 15:46 UTC (3+ messages)
[PATCH 0/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series
2017-10-11 15:11 UTC (14+ messages)
` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision
` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias
` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card
` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339
` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset duration
` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery
` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file
` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
` [PATCH 11/12] ARM: dts: imx: add support for TX6QP
` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard
[PATCH 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 TX controller
2017-10-11 13:36 UTC (9+ messages)
` [PATCH 2/2] v4l: cadence: Add Cadence MIPI-CSI2 TX driver
[PATCH v4 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 RX
2017-10-11 13:22 UTC (5+ messages)
` [PATCH v4 2/2] v4l: cadence: Add Cadence MIPI-CSI2 RX driver
[PATCH 1/2] gpu: host1x: Call of_dma_configure after setting bus
2017-10-11 13:06 UTC (5+ messages)
` [PATCH 2/2] of: configure DMA for host1x devices
[PATCH 0/4] ARM: dts: Add USB function support
2017-10-11 12:56 UTC (7+ messages)
` [PATCH 1/4] ARM: dts: r8a7743: Add HS-USB device node
` [PATCH 3/4] ARM: dts: r8a7743: Add USB-DMAC device nodes
` [PATCH 4/4] ARM: dts: r8a7743: Enable DMA for HSUSB
[PATCH 2/4] ARM: dts: iwg20d-q7: Enable HS-USB
2017-10-11 12:52 UTC (3+ messages)
` [PATCH v2] "
[PATCH 0/2] ARM: dts: gr-peach: ETHER and OS Timers enable
2017-10-11 12:45 UTC (5+ messages)
` [PATCH 1/2] ARM: dts: gr-peach: Add ETHER pin group
` [PATCH 2/2] ARM: dts: gr-peach: Enable ostm0 and ostm1 timers
[PATCH 1/2] dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation
2017-10-11 12:17 UTC (2+ messages)
` [PATCH 2/2] mfd: Add Spreadtrum SC27xx series PMICs driver
[RFCv2 PATCH 00/36] Process management for IOMMU + SVM for SMMUv3
2017-10-11 11:33 UTC (3+ messages)
` [RFCv2 PATCH 05/36] iommu/process: Bind and unbind process to and from devices
[PATCH v3 00/14] drm/sun4i: hdmi: Support HDMI controller on A31
2017-10-11 11:24 UTC (4+ messages)
` [PATCH v3 09/14] regmap: add iopoll-like polling macro for regmap_field
[PATCH 0/9] drm/panel: simple: improve definition of display modes and add more panels
2017-10-11 11:23 UTC (10+ messages)
` [PATCH 1/9] drm/panel: simple: add a macro for defining display modes in a simpler and less error prone way
` [PATCH 2/9] drm/panel: simple: simplify display_mode definitions by using macro
` [PATCH 3/9] drm/panel: simple: make it possible to override LCD bus format
` [PATCH 4/9] drm/panel: simple: add support for overriding the pixel clock polarity
` [PATCH 5/9] drm/panel: simple: add support for EDT ET0350 3.5" QVGA panel
` [PATCH 6/9] drm/panel: simple: add support for EDT ET0430 4.3" HVGA panel
` [PATCH 7/9] drm/panel: simple: add support for NLT NL12880 12.1" WXGA LVDS panel
` [PATCH 8/9] drm/panel: simple: add support for EDT ETM0700G0EDH6 7" WVGA panel
` [PATCH 9/9] drm/panel: simple: add support for EDT ET1010G0DSA/ETML1010G0DKA 10.1" WXGA LVDS panels
[Patch v6 0/7] Introduce framework for SLIMbus device drivers
2017-10-11 11:23 UTC (18+ messages)
` [Patch v6 1/7] slimbus: Device management on SLIMbus
` [alsa-devel] "
` [Patch v6 2/7] slimbus: Add messaging APIs to slimbus framework
` [alsa-devel] "
[PATCH 0/7] ARM: dts: imx53: Update Update Ka-Ro TX53 dts files
2017-10-11 11:07 UTC (8+ messages)
` [PATCH 1/7] ARM: dts: imx53-tx53: Relicense the TX53 dts files under GPLv2/X11
` [PATCH 2/7] ARM: dts: imx53-tx53: remove the regulators bus
` [PATCH 3/7] ARM: dts: imx53-tx53: remove obsolete eeti,egalax_ts
` [PATCH 4/7] ARM: dts: imx53-tx53: add trickle-charge config for DS1339
` [PATCH 5/7] ARM: dts: imx53-tx53: use explicit pad_ctl settings for I2C pins
` [PATCH 6/7] ARM: dts: imx53-tx53: add support for I2C bus recovery
` [PATCH 7/7] ARM: dts: imx53-tx53: fix interrupt flags and use interrupts-extended property
[PATCH 0/4] ARM: dts: imx28: Update Ka-Ro TX28 dts file
2017-10-11 11:05 UTC (5+ messages)
` [PATCH 1/4] ARM: dts: imx28-tx28: Relicense the TX28 dts file under GPLv2/X11
` [PATCH 2/4] ARM: dts: imx28-tx28: remove the regulators bus
` [PATCH 3/4] ARM: dts: imx28-tx28: fix interrupt flags and use interrupts-extended property
` [PATCH 4/4] ARM: dts: imx28-tx28: add trickle-charge config for DS1339
[PATCH v3 1/2] drm/bridge: Add Cadence DSI driver
2017-10-11 10:13 UTC (4+ messages)
[PATCH v4 00/11] drm/sun4i: hdmi: Support HDMI controller on A31
2017-10-11 10:09 UTC (3+ messages)
` [PATCH v4 02/11] drm/sun4i: tcon: Add support for demuxing TCON output "
` [linux-sunxi] "
arm64: 4.14 of_match_node() issues
2017-10-11 10:07 UTC (6+ messages)
[PATCH v6 0/2] gpio: uniphier: UniPhier GPIO driver
2017-10-11 9:38 UTC (7+ messages)
` [PATCH v6 1/2] dt-bindings: gpio: uniphier: add UniPhier GPIO binding
` [PATCH v6 2/2] gpio: uniphier: add UniPhier GPIO controller driver
[PATCH v3 0/2] pinctrl: rza1: add support for RZ/A1L
2017-10-11 9:36 UTC (4+ messages)
` [PATCH v3 1/2] "
[PATCH v2] pinctrl: intel: merrifield: Introduce OF device table
2017-10-11 9:25 UTC (4+ messages)
[PATCH 1/2] dt-bindings: iio: health: Fix max30100 I2C chip address in example
2017-10-11 9:09 UTC (2+ messages)
` [PATCH 2/2] dt-bindings: iio: health: Use binding name for max30102 "
[PATCH v3 00/10] update MT7623 and MT2701 dts
2017-10-11 9:02 UTC (2+ messages)
[PATCH] arm64: dts: stratix10: fix interrupt number for gpio1
2017-10-11 8:29 UTC
[PATCH 1/2] arm64: dts: stratix10: add gpio header
2017-10-11 8:18 UTC (3+ messages)
` [PATCH 2/2] arm64: dts: stratix10: enable gpio and leds
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).