devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2018-03-29 09:39:38 to 2018-03-30 15:25:24 UTC [more...]

[PATCHv5,5/5] ARM: dts: omap4-droid4: add soundcard
 2018-03-30 15:25 UTC  (29+ messages)
` [PATCHv5, 5/5] "
    ` omap4-droid4: voice call support was Re: [PATCHv5,5/5] "
        ` omap4-droid4: voice call support was Re: [PATCHv5, 5/5] "

[PATCH v4 00/13] staging: typec: tcpci: move out of staging
 2018-03-30 15:15 UTC  (12+ messages)
` [PATCH v4 01/13] dt-bindings: connector: add properties for typec
` [PATCH v4 04/13] usb: typec: add fwnode to tcpc
` [PATCH v4 07/13] staging: typec: tcpci: register port before request irq
` [PATCH v4 10/13] usb: typec: tcpm: set cc for drp toggling attach
` [PATCH v4 11/13] staging: typec: tcpci: keep the not connecting cc line open

[PATCH net-next 0/8] Microsemi Ocelot switch support
 2018-03-30 14:50 UTC  (16+ messages)
` [PATCH net-next 3/8] net: mscc: Add MDIO driver
` [PATCH net-next 5/8] net: mscc: Add initial Ocelot switch support

[PATCH v2] of_net: Implement of_get_nvmem_mac_address helper
 2018-03-30 14:40 UTC  (4+ messages)
` [PATCH v3 0/2] "
  ` [PATCH v4 "

[PATCH/RFT v2 0/3] thermal: add support for r8a77995
 2018-03-30 13:49 UTC  (8+ messages)
` [PATCH/RFT v2 1/3] thermal: rcar_thermal: add r8a77995 support
` [PATCH/RFT v2 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support
` [PATCH/RFT v2 3/3] arm64: dts: renesas: r8a77995: add thermal device support

[PATCH v2 00/10] Add support for SAMA5D2 touchscreen
 2018-03-30 13:02 UTC  (8+ messages)
` [PATCH v2 05/10] iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
` [PATCH v2 06/10] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
` [PATCH v2 07/10] input: touchscreen: touch_adc: add generic resistive ADC touchscreen

[PATCHv6 0/2] Motorola Droid 4 Audio Support
 2018-03-30 12:58 UTC  (3+ messages)
` [PATCHv6 1/2] dt-bindings: mfd: motorola-cpcap: document audio-codec
` [PATCHv6 2/2] mfd: motorola-cpcap: Add audio-codec support

[PATCH v3 0/8] ARM: davinci: complete the conversion to using the reset framework
 2018-03-30 11:07 UTC  (3+ messages)

[PATCH 0/3] iio: adc: meson-axg: add saradc driver support
 2018-03-30 11:05 UTC  (5+ messages)
` [PATCH 2/3] dt-bindings: iio: adc: document the Meson AXG support

[PATCH] ARM: dts: da850-evm: Enable usb_phy, usb0 and usb1
 2018-03-30 11:02 UTC  (2+ messages)

[PATCH v2] leds: add LED driver for CR0014114 board
 2018-03-30 10:53 UTC  (8+ messages)
` [PATCH v3] "
        ` Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]

[PATCH v4 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
 2018-03-30 10:10 UTC  (9+ messages)
` [PATCH "

[PATCH v3 0/6] Add support for PWM input capture on STM32
 2018-03-30 10:01 UTC  (7+ messages)
` [PATCH v3 1/6] dt-bindings: mfd: stm32-timers: add support for dmas
` [PATCH v3 2/6] "
` [PATCH v3 3/6] pwm: stm32: add capture support
` [PATCH v3 4/6] pwm: stm32: improve capture by tuning counter prescaler
` [PATCH v3 5/6] pwm: stm32: use input prescaler to improve period capture
` [PATCH v3 6/6] ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval

[PATCH v3 1/3] regulator: axp20x: add drivevbus support for axp803
 2018-03-30  9:39 UTC  (6+ messages)
` [PATCH v3 2/3] arm64: allwinner: axp803: Add drivevbus regulator
` [PATCH v3 3/3] arm64: allwinner: a64: bananapi-m64: add usb otg

[PATCH v3 0/8] arm: Base support for Renesas RZN1D-DB Board
 2018-03-30  9:34 UTC  (20+ messages)
` [PATCH v3 1/8] DT: mfd: renesas,rzn1-sysctrl: document RZ/N1 sysctrl node
` [PATCH v3 2/8] DT: reset: renesas,rzn1-reboot: document RZ/N1 reboot driver
` [PATCH v3 3/8] DT: arm: renesas,rzn1: add the RZ/N1 SoC and RZN1D-DB board
` [PATCH v3 4/8] reset: Renesas RZ/N1 reboot driver
` [PATCH v3 5/8] arm: shmobile: Add the RZ/N1 arch to the shmobile Kconfig
` [PATCH v3 6/8] DT: arm: Add Renesas RZ/N1 SoC base device tree file
` [PATCH v3 7/8] DT: arm: Add Renesas RZN1D-DB Board base file
` [PATCH v3 8/8] DT: arm: Add the RZN1D-DB Board to Renesas Makefile target

[PATCH net-next] dt-bindings: net: renesas-ravb: Add support for r8a77470 SoC
 2018-03-30  9:26 UTC  (3+ messages)

[PATCH 0/3] iio: add unit converter
 2018-03-30  9:24 UTC  (11+ messages)
` [PATCH 2/3] dt-bindings: iio: wrapper: add io-channel-unit-converter
` [PATCH 3/3] iio: wrapper: unit-converter: new driver

[PATCH net-next 00/12] ARM: sun8i: r40: Add Ethernet support
 2018-03-30  9:13 UTC  (4+ messages)
` [PATCH net-next 03/12] dt-bindings: net: dwmac-sun8i: Clean up clock delay chain descriptions

[PATCH v2 00/10] Allwinner H3 DVFS support
 2018-03-30  8:16 UTC  (9+ messages)
` [PATCH v2 02/10] regulator: add support for SY8106A regulator
` [PATCH v2 06/10] ARM: sun8i: h2+: add SY8113B regulator used by Orange Pi Zero board
` [PATCH v2 08/10] ARM: sun8i: h3: Add SY8106A regulator to Orange Pi PC
` [PATCH v2 09/10] ARM: sun8i: h3: fix ALL-H3-CC H3 ver VDD-CPUX voltage

[PATCH v4 00/10] Add the I3C subsystem
 2018-03-30  7:59 UTC  (13+ messages)
` [PATCH v4 01/10] i3c: Add core I3C infrastructure
` [PATCH v4 02/10] docs: driver-api: Add I3C documentation
` [PATCH v4 03/10] i3c: Add sysfs ABI spec
` [PATCH v4 04/10] dt-bindings: i3c: Document core bindings
` [PATCH v4 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
` [PATCH v4 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer
` [PATCH v4 07/10] i3c: master: Add driver for Cadence IP
` [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings
` [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander
` [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander

[PATCH v3 1/2] dma-mapping: move dma configuration to bus infrastructure
 2018-03-30  7:54 UTC  (2+ messages)
      ` [PATCH v3 2/2] drivers: remove force dma flag from buses

[PATCH] dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
 2018-03-30  7:53 UTC  (3+ messages)

[PATCH] dt-bindings: rcar-dmac: Document r8a77470 support
 2018-03-30  7:51 UTC  (3+ messages)

[PATCH 00/12] Add r8a77470/iW-RainboW-G23S single board computer support
 2018-03-30  6:56 UTC  (6+ messages)
` [PATCH 09/12] ARM: shmobile: Document iW-RainboW-G23S single board computer

[PATCH v2 1/8] soc: renesas: rcar-sysc: Add r8a77470 support
 2018-03-30  6:54 UTC  (7+ messages)
` [PATCH v2 5/8] ARM: shmobile: r8a77470: basic SoC support
` [PATCH v2 6/8] ARM: dts: r8a77470: Initial SoC device tree

[PATCH v3 4/4] watchdog: add Gateworks System Controller support
 2018-03-30  1:07 UTC  (2+ messages)
` [v3,4/4] "

[PATCH 0/2] regulator: add QCOM RPMh regulator driver
 2018-03-29 22:36 UTC  (4+ messages)
` [PATCH 1/2] "

[PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500
 2018-03-29 22:16 UTC  (5+ messages)
` [PATCH v2] "

[PATCH v4 00/14] CPU scaling support for msm8996
 2018-03-29 21:26 UTC  (15+ messages)
` [PATCH v4 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver
` [PATCH v4 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules
` [PATCH v4 03/14] clk: qcom: Add CPU clock driver for msm8996
` [PATCH v4 04/14] clk: qcom: Add DT bindings for "
` [PATCH v4 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL
` [PATCH v4 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz
` [PATCH v4 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996
` [PATCH v4 08/14] dt: qcom: Add opp and thermal to the msm8996
` [PATCH v4 09/14] regulator: qcom_spmi: Add support for SAW
` [PATCH v4 10/14] dt-bindings: Add support for SAW documentation
` [PATCH v4 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs
` [PATCH v4 12/14] cpufreq: Add Kryo CPU scaling driver
` [PATCH v4 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
` [PATCH v4 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration

[PATCHv3 0/7] Add Intel Stratix10 FPGA manager and service layer
 2018-03-29 21:12 UTC  (3+ messages)
` [PATCHv3 4/7] dt-bindings: fpga: add Stratix10 SoC FPGA manager binding

[PATCH v4 0/7] phy: qcom: Updates for USB PHYs on SDM845
 2018-03-29 20:55 UTC  (15+ messages)
` [PATCH v4 1/7] clk: msm8996-gcc: change halt check for USB/PCIE pipe_clk
` [PATCH v4 2/7] phy: qcom-qmp: Enable pipe_clk before PHY initialization
` [PATCH v4 3/7] phy: qcom-qusb2: Fix crash if nvmem cell not specified
` [PATCH v4 4/7] dt-bindings: phy-qcom-qmp: Update bindings for sdm845
` [PATCH v4 5/7] phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support "
` [PATCH v4 6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values
` [PATCH v4 7/7] phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845

[PATCH v1 0/1] arm: dts: modify Nuvoton NPCM750 device tree
 2018-03-29 20:37 UTC  (2+ messages)

[PATCH 2/2][v7] driver: mtd: update struct map_info's swap as per map requirement
 2018-03-29 20:23 UTC  (2+ messages)

[PATCH 1/2][v7] dt-bindings: mtd-physmap: Add endianness supports
 2018-03-29 20:22 UTC  (4+ messages)

[net-next PATCH v2 00/10] Add support for netcp driver on K2G SoC
 2018-03-29 20:03 UTC  (10+ messages)
` [net-next PATCH v2 03/10] net: netcp: ethss: make call to gbe_sgmii_config() conditional
` [net-next PATCH v2 05/10] net: netcp: ethss: use rgmii link status for 2u cpsw hardware
` [net-next PATCH v2 08/10] net: netcp: ethss: use of_get_phy_mode() to support different RGMII modes

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-29 19:44 UTC  (10+ messages)

[PATCH] drivers: gpio: pca953x: add compatibility for pcal6524 and pcal9555a
 2018-03-29 19:29 UTC  (4+ messages)

[PATCH v7 0/4] Bluetooth: hci_qca: Add serdev support
 2018-03-29 19:15 UTC  (5+ messages)
` [PATCH v7 1/4] arm64: dts: apq8096-db820c: Enable wlan and bt en pins
` [PATCH v7 2/4] arm64: dts: apq8096-db820c: enable bluetooth node
` [PATCH v7 3/4] dt-bindings: net: bluetooth: Add qualcomm-bluetooth
` [PATCH v7 4/4] Bluetooth: hci_qca: Add serdev support

[PATCH v6 0/3] Bluetooth: hci_qca: Add serdev support
 2018-03-29 17:56 UTC  (2+ messages)

[PATCH v9 0/2] Initial Allwinner V3s CSI Support
 2018-03-29 17:28 UTC  (4+ messages)

[PATCH v3 00/13] ARM: dts: ipq: updates to enable a few peripherals
 2018-03-29 16:37 UTC  (6+ messages)
` [PATCH v3 04/13] ARM: dts: ipq4019: Update ipq4019-dk01.1 board data

[PATCH v6 0/6] Add MediaTek PMIC keys support
 2018-03-29 16:16 UTC  (13+ messages)
` [PATCH v6 2/6] dt-bindings: input: Add common keyboard document bindings
` [PATCH v6 3/6] dt-bindings: input: Add document bindings for mtk-pmic-keys

[PATCH v3 2/9] dt-bindings: ingenic: Add DT bindings for TCU clocks
 2018-03-29 15:59 UTC  (12+ messages)
` [PATCH v4 0/8] Ingenic JZ47xx Timer/Counter Unit drivers
  ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers
      ` [PATCH v4 4/8] dt-bindings: Add doc for the Ingenic TCU drivers,
  ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver
      ` [PATCH v4 7/8] clocksource: Add a new timer-ingenic driver,

[PATCH v6 1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev
 2018-03-29 15:51 UTC  (4+ messages)
` [PATCH v6 2/2] net: ethernet: nixge: Add support "

[RESEND PATCH v2 0/8] Add support for PWM input capture on STM32
 2018-03-29 15:29 UTC  (8+ messages)
` [RESEND PATCH v2 4/8] mfd: stm32-timers: add support for dmas

[DPU PATCH 0/2] Add hardware catalog information in driver source for SDM845
 2018-03-29 15:28 UTC  (6+ messages)
` [DPU PATCH 1/2] dt-bindings: msm/disp: Remove hw block offset DT entries "

[net-next PATCH v2 01/10] soc: ti: K2G: enhancement to support QMSS in NSS
 2018-03-29 14:59 UTC  (4+ messages)
` [net-next,v2,01/10] "
  ` [net-next, v2, 01/10] "

[DPU PATCH v2 0/2] Add hardware catalog information in driver source for SDM845
 2018-03-29 14:52 UTC  (5+ messages)
  ` [DPU PATCH v2 1/2] dt-bindings: msm/disp: Remove hw block offset DT entries "
  ` [DPU PATCH v2 2/2] drm/msm: Add hardware catalog data in driver source "

[PATCH] mfd: dt-bindings: Add PMIC reset property
 2018-03-29 14:46 UTC  (3+ messages)

[PATCH v2] mfd: dt-bindings: Add rk808 PMIC reset property
 2018-03-29 14:44 UTC 

[PATCH 0/2 v8] Lattice MachXO2 Slave SPI FPGA Manager support
 2018-03-29 14:33 UTC  (5+ messages)
` [PATCH 2/2] fpga: lattice machxo2: Add Lattice MachXO2 support

[PATCH 0/8] Designware EP support and code clenan up
 2018-03-29 13:56 UTC  (5+ messages)
` [PATCH 6/8] PCI: dwc: Replace lower into upper case characters

[PATCH v8 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 RX
 2018-03-29 13:32 UTC  (5+ messages)
` [PATCH v8 1/2] dt-bindings: media: Add Cadence MIPI-CSI2 RX Device Tree bindings
` [PATCH v8 2/2] v4l: cadence: Add Cadence MIPI-CSI2 RX driver

[PATCH v7 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 TX controller
 2018-03-29 12:35 UTC  (3+ messages)
` [PATCH v7 2/2] v4l: cadence: Add Cadence MIPI-CSI2 TX driver

[PATCH v2 0/2] drm/omap: Workaround for errata i878
 2018-03-29 12:11 UTC  (4+ messages)
` [PATCH v2 2/2] drm/omap: partial workaround for DRA7xx DMM "

[PATCH v8 00/14] iommu/rockchip: Use OF_IOMMU
 2018-03-29 10:24 UTC  (2+ messages)

[PATCH v6 1/3] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
 2018-03-29 10:02 UTC  (10+ messages)

[PATCH] gpio: dwapb: Add support for 32 interrupts
 2018-03-29  9:39 UTC  (2+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).