messages from 2018-04-21 11:28:41 to 2018-04-23 10:36:01 UTC [more...]
[PATCH v2 0/2] arm64: dts: renesas: Add support for R-Car E3 and Ebisu board
2018-04-23 10:36 UTC (2+ messages)
[PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
2018-04-23 10:35 UTC (6+ messages)
[PATCH 0/4] ARM: dts: am437x boards: Correct tps65218 irq type
2018-04-23 10:31 UTC (2+ messages)
[PATCH 0/8] drm: bridge: Add support for static image formats
2018-04-23 10:29 UTC (17+ messages)
` [PATCH 1/8] "
` [PATCH 2/8] dt-bindings: display: bridge: thc63lvd1024: Add lvds map property
` [PATCH 3/8] drm: bridge: thc63lvd1024: Add support for LVDS mode map
` [PATCH 4/8] arm64: dts: renesas: eagle: Add thc63 LVDS map
` [PATCH 6/8] drm: rcar-du: rcar-lvds: Add bridge format support
[PATCH] mmc: disable card sleep via device-tree
2018-04-23 10:24 UTC (5+ messages)
[PATCH v5 0/8] arm: Base support for Renesas RZN1D-DB Board
2018-04-23 10:14 UTC (8+ messages)
` [PATCH v5 1/6] arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig
` [PATCH v5 3/6] dt-bindings: arm: Document the RZN1D-DB board
` [PATCH v5 4/6] ARM: dts: Renesas RZ/N1 SoC base device tree file
[PATCH v10 0/2] media: v4l: Add support for the Cadence MIPI-CSI2 TX controller
2018-04-23 10:07 UTC (3+ messages)
` [PATCH v10 2/2] v4l: cadence: Add Cadence MIPI-CSI2 TX driver
[PATCH v3 1/2] Documentation: mmc: add optional cd-delay-ms property
2018-04-23 10:00 UTC (5+ messages)
` [PATCH v3 2/2] mmc: core: Add tunable delay before detecting card after card is inserted
[PATCH v2 0/5] Add STM32F7 I2C Support on STM32MP157C
2018-04-23 9:48 UTC (6+ messages)
` [PATCH v2 1/5] ARM: multi_v7_defconfig: Add STM32F7 I2C support
` [PATCH v2 2/5] ARM: dts: stm32: Add STM32F7 I2C support for STM32MP157C SoC
` [PATCH v2 3/5] ARM: dts: stm32: Add I2Cs pin control on STM32MP157C
` [PATCH v2 4/5] ARM: dts: stm32: Add I2C4 support for STM32MP157C-ED1
` [PATCH v2 5/5] ARM: dts: stm32: Add I2C2/5 support for STM32MP157C-EV1
[PATCH 1/2] mmc: dw_mmc-bluefield: Add driver extension
2018-04-23 9:31 UTC (2+ messages)
[RFC. PATCH] earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon
2018-04-23 9:27 UTC
[PATCH v3 00/11] media: ov772x: support media controller, device tree probing, etc
2018-04-23 9:18 UTC (15+ messages)
` [PATCH v3 01/11] media: dt-bindings: ov772x: add device tree binding
` [PATCH v3 02/11] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING
` [PATCH v3 03/11] media: ov772x: add checks for register read errors
` [PATCH v3 04/11] media: ov772x: add media controller support
` [PATCH v3 05/11] media: ov772x: use generic names for reset and powerdown gpios
` [PATCH v3 06/11] media: ov772x: support device tree probing
` [PATCH v3 07/11] media: ov772x: handle nested s_power() calls
` [PATCH v3 08/11] media: ov772x: reconstruct s_frame_interval()
` [PATCH v3 09/11] media: ov772x: avoid accessing registers under power saving mode
` [PATCH v3 10/11] media: ov772x: make set_fmt() return -EBUSY while streaming
` [PATCH v3 11/11] media: ov772x: create subdevice device node
[PATCH v1 0/2] Add MDMA Support on STM32MP157C
2018-04-23 9:04 UTC (3+ messages)
` [PATCH v1 1/2] ARM: configs: stm32: Add MDMA support "
[PATCH v1 0/7] add support for Bluetooth on MT7622 SoC
2018-04-23 8:58 UTC (5+ messages)
` [PATCH v1 5/7] soc: mediatek: add a fixed wait for SRAM stable
[PATCH v1 0/4] Add DMAv2 and DMAMUX Support on STM32MP157C
2018-04-23 8:51 UTC (2+ messages)
[PATCH v3] ARM: dts: tpc: Device tree description of the iMX6Q TPC board
2018-04-23 8:48 UTC (3+ messages)
` [PATCH v6] "
[PATCH v2 1/5] drm/panel: Add support for the EDT ETM0700G0BDH6
2018-04-23 8:44 UTC (4+ messages)
` [PATCH v3 0/6] Add basic support for emtrion emCON-MX6 modules
` [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series
[PATCH v2 1/2] Documentation: mmc: add description for power-delay-ms
2018-04-23 8:36 UTC (3+ messages)
` [PATCH v2 2/2] mmc: core: add tunable delay waiting for power to be stable
[PATCH] arm64: dts: marvell: armada-37xx: reserve memory for ATF
2018-04-23 8:31 UTC (3+ messages)
[PATCH v6 1/2] drm/bridge: Add Cadence DSI driver
2018-04-23 8:26 UTC (4+ messages)
[PATCH v7 00/11] Sunxi: Add SMP support on A83T
2018-04-23 8:16 UTC (5+ messages)
` [PATCH v7 06/11] ARM: sunxi: Add initialization of CNTVOFF
` [PATCH v7 08/11] ARM: sun9i: smp: Add is_a83t field
[PATCH] arm64: allwinner: h6: restore the usage of CCU slice macros
2018-04-23 7:47 UTC (3+ messages)
[PATCH 1/2] Documentation: mmc: add description for power-delay-ms
2018-04-23 7:46 UTC (6+ messages)
` [PATCH 2/2] mmc: core: add tunable delay waiting for power to be stable
[PATCH] dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
2018-04-23 7:35 UTC
[PATCH] dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
2018-04-23 7:32 UTC
[RFC PATCH] dt-bindings: add a jsonschema binding example
2018-04-23 7:25 UTC (4+ messages)
[PATCH v4 0/8] Add tda998x (HDMI) support to atmel-hlcdc
2018-04-23 7:23 UTC (9+ messages)
` [PATCH v4 1/8] dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185
` [PATCH v4 2/8] dt-bindings: display: atmel: optional video-interface of endpoints
` [PATCH v4 3/8] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
` [PATCH v4 4/8] drm/i2c: tda998x: find the drm_device via the drm_connector
` [PATCH v4 5/8] drm/i2c: tda998x: split tda998x_encoder_dpms into enable/disable
` [PATCH v4 6/8] drm/i2c: tda998x: split encoder and component functions from the work
` [PATCH v4 7/8] drm/i2c: tda998x: register as a drm bridge
` [RFC PATCH v4 8/8] drm/tilcdc: decomponentize now that tda998x is a bridge
[PATCH] ARM: dts: sun4i: Fix incorrect clocks for displays
2018-04-23 7:14 UTC (2+ messages)
[PATCH v6 1/3] regulator: axp20x: add drivevbus support for axp803
2018-04-23 6:32 UTC (3+ messages)
` [PATCH v6 2/3] arm64: allwinner: axp803: Add drivevbus regulator
` [PATCH v6 3/3] arm64: allwinner: a64: bananapi-m64: add usb otg
[PATCH 1/5] ARM: dts: imx6sx-sabreauto: add PMIC support
2018-04-23 3:46 UTC (5+ messages)
` [PATCH 2/5] ARM: dts: imx6sx-sabreauto: add max7322 IO expander support
` [PATCH 3/5] ARM: dts: imx6sx-sabreauto: add IO expander max7310 support
` [PATCH 4/5] ARM: dts: imx6sx-sabreauto: add fec support
` [PATCH 5/5] ARM: dts: imx6sx-sabreauto: add wdog external reset support
[PATCH v2 1/2] dt-bindings: input: Add Add Spreadtrum SC27xx vibrator documentation
2018-04-23 2:33 UTC (2+ messages)
` [PATCH v2 2/2] input: misc: Add Spreadtrum vibrator driver
[PATCH v5 0/10] Add endpoint driver for Rockchip PCIe controller
2018-04-23 1:07 UTC (2+ messages)
[PATCH 16/18 v2] regulator: fixed/gpio: Update device tree bindings
2018-04-22 23:07 UTC
[PATCH v3 0/9] staging: iio: ad2s1200: Driver clean up
2018-04-22 22:04 UTC (10+ messages)
` [PATCH v3 1/9] staging: iio: ad2s1200: Add kernel docs to driver state
` [PATCH v3 2/9] staging: iio: ad2s1200: Improve readability with be16_to_cpup
` [PATCH v3 3/9] staging: iio: ad2s1200: Replace legacy gpio API with modern API
` [PATCH v3 4/9] staging: iio: ad2s1200: Replace platform data with dt bindings
` [PATCH v3 5/9] staging: iio: ad2s1200: Add documentation for device tree binding
` [PATCH v3 6/9] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
` [PATCH v3 7/9] staging: iio: Documentation: Add missing sysfs docs for angle channel
` [PATCH v3 8/9] staging: iio: ad2s1200: Add scaling factor "
` [PATCH v3 9/9] staging: iio: ad2s1200: Move driver out of staging
[PATCH] mtd: rawnand: sunxi: Remove support for GPIO-based Ready/Busy polling
2018-04-22 17:25 UTC (2+ messages)
[PATCH] ARM: dts: imx6qdl-cubox-i: Move card-detect GPIO to 1.5 SOM devices only
2018-04-22 17:23 UTC (5+ messages)
[PATCH v2 00/13] staging: iio: ad2s1200: Driver clean up
2018-04-22 14:41 UTC (33+ messages)
` [PATCH v2 01/13] staging: iio: ad2s1200: Remove unneeded include
` [PATCH v2 02/13] staging: iio: ad2s1200: Sort includes alphabetically
` [PATCH v2 03/13] staging: iio: ad2s1200: Reverse Christmas tree ordering
` [PATCH v2 04/13] staging: iio: ad2s1200: Add blank lines
` [PATCH v2 05/13] staging: iio: ad2s1200: Add kernel docs to driver state
` [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value
` [PATCH v2 07/13] staging: iio: ad2s1200: Improve readability with be16_to_cpup
` [PATCH v2 08/13] staging: iio: ad2s1200: Replace legacy gpio API with modern API
` [PATCH v2 09/13] staging: iio: ad2s1200: Add documentation for device tree binding
` [PATCH v2 10/13] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
` [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel
` [PATCH v2 12/13] staging: iio: ad2s1200: Add scaling factor "
` [PATCH v2 13/13] staging: iio: ad2s1200: Move driver out of staging
[PATCH 4.9 57/95] dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4
2018-04-22 13:53 UTC
[PATCH 4.14 112/164] dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4
2018-04-22 13:52 UTC
[PATCH 4.16 148/196] dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4
2018-04-22 13:52 UTC
[PATCH v4 1/3] dt-bindings: pinctrl: bcm2835-gpio: Add generic pinctrl support
2018-04-22 12:44 UTC (4+ messages)
` [PATCH v5 0/3] pinctrl: bcm2835: "
` [PATCH v5 2/3] pinctrl: bcm2835: Add support for generic pinctrl binding
[PATCH 0/3] pinctrl: meson: add support for the Meson8m2 SoC
2018-04-22 10:53 UTC (4+ messages)
` [PATCH 1/3] dt-bindings: "
` [PATCH 2/3] pinctrl: meson: meson8: "
` [PATCH 3/3] pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals
[PATCH v7 0/5] of: change overlay apply input data from unflattened
2018-04-22 10:30 UTC (9+ messages)
` [PATCH v7 2/5] of: change overlay apply input data from unflattened to FDT
[PATCH 1/2] dt-bindings: net: gmii2rgmii: Fix typos
2018-04-22 4:01 UTC (2+ messages)
` [PATCH 2/2] dt-bindings: net: gmii2rgmii: Clarify proper usage
[PATCH v3 0/7] Add tda998x (HDMI) support to atmel-hlcdc
2018-04-21 22:13 UTC (8+ messages)
` [PATCH v3 4/7] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
[PATCH] ARM: dts: exynos: Fix invalid node referenced by i2c20 alias
2018-04-21 18:30 UTC
[PATCH v7 1/2] iio:imu: inv_mpu6050: support more interrupt types
2018-04-21 17:45 UTC (7+ messages)
` [PATCH v7 2/2] dt-bindings: iio:imu:mpu6050: "
[PATCH 0/3] Add support for STM32MP1 ADC
2018-04-21 15:37 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1
` [PATCH 2/3] iio: adc: "
` [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
[PATCH 00/27] Add multi-channel and overheat IRQ support to Armada thermal driver
2018-04-21 15:12 UTC (28+ messages)
` [PATCH 01/27] thermal: armada: add a function that sanitizes the thermal zone name
` [PATCH 02/27] thermal: armada: remove useless register accesses
` [PATCH 03/27] thermal: armada: remove misleading comments
` [PATCH 04/27] thermal: armada: rename the initialization routine
` [PATCH 05/27] thermal: armada: dissociate a380 and cp110 ->init() hooks
` [PATCH 06/27] thermal: armada: average over samples to avoid glitches
` [PATCH 07/27] thermal: armada: convert driver to syscon register accesses
` [PATCH 08/27] thermal: armada: use the resource managed registration helper alternative
` [PATCH 09/27] thermal: armada: add multi-channel sensors support
` [PATCH 10/27] thermal: armada: remove sensors validity from the IP initialization
` [PATCH 11/27] thermal: armada: move validity check out of the read function
` [PATCH 12/27] thermal: armada: get rid of the ->is_valid() pointer
` [PATCH 13/27] thermal: armada: add overheat interrupt support
` [PATCH 14/27] dt-bindings: cp110: rename cp110 syscon file
` [PATCH 15/27] dt-bindings: ap806: prepare the syscon file to list other syscons nodes
` [PATCH 16/27] dt-bindings: cp110: "
` [PATCH 17/27] dt-bindings: ap806: add the thermal node in the syscon file
` [PATCH 18/27] dt-bindings: cp110: update documentation since DT de-duplication
` [PATCH 19/27] dt-bindings: cp110: add the thermal node in the syscon file
` [PATCH 20/27] dt-bindings: thermal: armada: add reference to new bindings
` [PATCH 21/27] arm64: dts: marvell: rename ap806 syscon node
` [PATCH 22/27] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
` [PATCH 23/27] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
` [PATCH 24/27] arm64: dts: marvell: add macro to make distinction between node names
` [PATCH 25/27] arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
` [PATCH 26/27] arm64: dts: marvell: add interrupt support to ap806 thermal node
` [PATCH 27/27] arm64: dts: marvell: add interrupt support to cp110 "
[PATCH] dt-bindings: iio: adc: mcp320x: Use vendor prefix compatible strings
2018-04-21 15:00 UTC (3+ messages)
[PATCH v3 0/2] iio: add unit converter
2018-04-21 14:34 UTC (4+ messages)
` [PATCH v3 1/2] dt-bindings: iio: afe: add current-sense-shunt and voltage-divider
[PATCH 00/17] Add System Error Interrupt support to Armada SoCs
2018-04-21 13:55 UTC (18+ messages)
` [PATCH 01/17] dt-bindings/interrupt-controller: fix Marvell ICU length in the example
` [PATCH 02/17] arm64: dts: marvell: fix CP110 ICU node size
` [PATCH 03/17] arm64: dts: marvell: add syscon compatible to CP110 ICU node
` [PATCH 04/17] irqchip/irq-mvebu-icu: fix wrong user data retrieval
` [PATCH 05/17] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts
` [PATCH 06/17] irqchip/irq-mvebu-icu: switch to regmap
` [PATCH 07/17] irqchip/irq-mvebu-icu: make irq_domain local
` [PATCH 08/17] irqchip/irq-mvebu-icu: disociate ICU and NSR
` [PATCH 09/17] irqchip/irq-mvebu-icu: support ICU subnodes
` [PATCH 10/17] irqchip/irq-mvebu-sei: add new driver for Marvell SEI
` [PATCH 11/17] arm64: marvell: enable SEI driver
` [PATCH 12/17] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI)
` [PATCH 13/17] dt-bindings/interrupt-controller: update Marvell ICU bindings
` [PATCH 14/17] dt-bindings/interrupt-controller: add description for Marvell SEI node
` [PATCH 15/17] arm64: dts: marvell: add AP806 SEI subnode
` [PATCH 16/17] arm64: dts: marvell: use new bindings for CP110 interrupts
` [PATCH 17/17] arm64: dts: marvell: add CP110 ICU SEI subnode
[PATCH V2 0/9] ARM: bcm283x: RPi 3 B+ support and other improvements
2018-04-21 11:28 UTC (3+ messages)
` [PATCH V2 8/9] arm64: defconfig: Enable LAN and BT support for RPi 3 B+
` [PATCH V2 9/9] arm64: dts: broadcom: Add reference to Raspberry Pi "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).