messages from 2018-08-09 13:30:28 to 2018-08-10 18:08:22 UTC [more...]
[PATCH v2 00/40] Tegra SDHCI add support for HS200 and UHS signaling
2018-08-10 18:08 UTC (21+ messages)
` [PATCH v2 01/40] dt-bindings: Add Tegra PMC pad configuration bindings
` [PATCH v2 02/40] dt-bindings: mmc: tegra: Add pad voltage control properties
` [PATCH v2 03/40] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
` [PATCH v2 04/40] dt-bindings: mmc: Add Tegra SDHCI sampling trimmer values
` [PATCH v2 05/40] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
` [PATCH v2 06/40] soc/tegra: pmc: Factor out DPD register bit calculation
` [PATCH v2 07/40] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
` [PATCH v2 08/40] soc/tegra: pmc: Use X macro to generate IO pad tables
` [PATCH v2 09/40] soc/tegra: pmc: Remove public pad voltage APIs
` [PATCH v2 10/40] soc/tegra: pmc: Implement pad configuration via pinctrl
` [PATCH v2 11/40] mmc: sdhci: Add a quirk to skip clearing the transfer mode register on tuning
` [PATCH v2 12/40] mmc: tegra: Reconfigure pad voltages during voltage switching
` [PATCH v2 13/40] mmc: tegra: Poll for calibration completion
` [PATCH v2 14/40] mmc: tegra: Set calibration pad voltage reference
` [PATCH v2 15/40] mmc: tegra: Power on the calibration pad
` [PATCH v2 16/40] mmc: tegra: Disable card clock during pad calibration
` [PATCH v2 17/40] mmc: tegra: Program pad autocal offsets from dt
` [PATCH v2 18/40] mmc: tegra: Perform pad calibration after voltage switch
` [PATCH v2 19/40] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
` [PATCH v2 20/40] mmc: tegra: Add a workaround for tap value change glitch
[PATCH 0/2] arm64: dts: meson-g12a: Introduce new DT files for Meson-G12A SoC
2018-08-10 18:07 UTC (4+ messages)
` [PATCH 2/2] arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
[PATCH 0/4] Add HiSilicon Hi3670 SoC and HiKey970 board
2018-08-10 17:53 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: arm: hisilicon: Add binding for Hi3670 SoC
` [PATCH 2/4] arm64: dts: Add devicetree for Hisilicon "
` [PATCH 3/4] dt-bindings: arm: hisilicon: Add binding for HiKey970 board
` [PATCH 4/4] arm64: dts: Add devicetree support "
[PATCH v1 0/4] Add EDAC driver for QCOM SoCs
2018-08-10 17:23 UTC (8+ messages)
` [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
` [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
` [PATCH v1 4/4] dt-bindigs: Update documentation of qcom,llcc
[PATCH 03/11] dt-bindings: interrupt-controller: RISC-V PLIC documentation
2018-08-10 16:57 UTC (3+ messages)
[PATCH v9 0/2] regulator: add QCOM RPMh regulator driver
2018-08-10 16:29 UTC (3+ messages)
` [PATCH v9 2/2] "
[PATCH RESEND RFC 0/4] Wakeup GPIO support for SDM845 SoC
2018-08-10 16:15 UTC (14+ messages)
` [PATCH RESEND RFC 1/4] drivers: pinctrl: qcom: add wakeup capability to GPIO
[RFC net-next 00/15] net: A socket API for LoRa
2018-08-10 15:57 UTC (10+ messages)
[PATCH v2 0/11] Add R8A7745/SK-RZG1E board support
2018-08-10 15:53 UTC (4+ messages)
` [PATCH] arm64: dts: renesas: r8a77980: add CSI2/VIN support
[PATCH v2 2/5] soc: renesas: rcar-sysc: Add r8a774a1 support
2018-08-10 15:50 UTC (4+ messages)
[PATCH v2 4/5] clk: renesas: Add r8a774a1 CPG Core Clock Definitions
2018-08-10 15:40 UTC (3+ messages)
[PATCH 0/3] i.MX PXP scaler/CSC driver
2018-08-10 15:20 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: media: Add i.MX Pixel Pipeline binding
` [PATCH 2/3] ARM: dts: imx6ull: add pxp support
` [PATCH 3/3] media: imx-pxp: add i.MX Pixel Pipeline driver
[PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
2018-08-10 15:11 UTC (2+ messages)
[PATCH] arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses
2018-08-10 12:30 UTC (3+ messages)
[PATCH v8 0/8] Introduce on-chip interconnect API
2018-08-10 14:52 UTC (9+ messages)
` [PATCH v8 1/8] interconnect: Add generic "
` [PATCH v8 2/8] dt-bindings: Introduce interconnect binding
` [PATCH v8 3/8] interconnect: Allow endpoints translation via DT
` [PATCH v8 4/8] interconnect: Add debugfs support
` [PATCH v8 5/8] interconnect: qcom: Add RPM communication
` [PATCH v8 6/8] dt-bindings: interconnect: Document qcom,msm8916 NoC bindings
` [PATCH v8 7/8] interconnect: qcom: Add msm8916 interconnect provider driver
` [PATCH v8 8/8] MAINTAINERS: add a maintainer for the interconnect API
[PATCH v7 00/12] media: staging/imx7: add i.MX7 media driver
2018-08-10 14:20 UTC (13+ messages)
` [PATCH v7 01/12] media: staging/imx: refactor imx media device probe
` [PATCH v7 02/12] media: staging/imx: rearrange group id to take in account IPU
` [PATCH v7 03/12] media: staging/imx7: add imx7 CSI subdev driver
` [PATCH v7 04/12] media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7
` [PATCH v7 05/12] media: dt-bindings: add bindings for i.MX7 media driver
` [PATCH v7 06/12] ARM: dts: imx7s: add mipi phy power domain
` [PATCH v7 07/12] ARM: dts: imx7s: add multiplexer controls
` [PATCH v7 08/12] ARM: dts: imx7: Add video mux, csi and mipi_csi and connections
` [PATCH v7 09/12] ARM: dts: imx7s-warp: add ov2680 sensor node
` [PATCH v7 10/12] media: imx7.rst: add documentation for i.MX7 media driver
` [PATCH v7 11/12] media: staging/imx: add i.MX7 entries to TODO file
` [PATCH v7 12/12] media: video-mux: add bayer formats
[PATCH v3 0/5] Add GPIO and EAVB Pinctrl support
2018-08-10 13:47 UTC (8+ messages)
` [PATCH v3 3/5] ARM: dts: r8a77470: Add GPIO support
` [PATCH v3 4/5] ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ
` [PATCH v3 5/5] ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB
[PATCH v6 00/24] Ingenic TCU patchset v6
2018-08-10 13:38 UTC (29+ messages)
` [PATCH v6 01/24] mfd: Add ingenic-tcu.h header
` [PATCH v6 02/24] dt-bindings: ingenic: Add DT bindings for TCU clocks
` [PATCH v6 03/24] doc: Add doc for the Ingenic TCU hardware
` [PATCH v6 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
` [PATCH v6 05/24] clocksource: Add a new timer-ingenic driver
` [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
` [PATCH v6 07/24] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
` [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
` [PATCH v6 09/24] watchdog: jz4740: Use regmap "
` [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
` [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
` [PATCH v6 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
` [PATCH v6 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
` [PATCH v6 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
` [PATCH v6 15/24] pwm: jz4740: Remove unused devicetree compatible strings
` [PATCH v6 16/24] pwm: jz4740: Add support for the JZ4725B
` [PATCH v6 17/24] clk: jz4740: Add TCU clock
` [PATCH v6 18/24] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
` [PATCH v6 19/24] MIPS: jz4740: Add DTS nodes for the TCU drivers
` [PATCH v6 20/24] MIPS: qi_lb60: Move PWM devices to devicetree
` [PATCH v6 21/24] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
` [PATCH v6 22/24] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
` [PATCH v6 23/24] MIPS: CI20: defconfig: enable OST driver
` [PATCH v6 24/24] MIPS: jz4740: Drop obsolete code
[PATCH 00/21] V4L2 fwnode rework; support for default configuration
2018-08-10 10:38 UTC (2+ messages)
[PATCH v8 0/4] drm/atmel-hlcdc: bus-width override support
2018-08-10 13:03 UTC (5+ messages)
` [PATCH v8 1/4] dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185
` [PATCH v8 2/4] dt-bindings: display: atmel: optional video-interface of endpoints
` [PATCH v8 3/4] drm/atmel-hlcdc: iterate over all output endpoints
` [PATCH v8 4/4] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
[PATCH v7 0/3] drm/atmel-hlcdc: bus-width override support
2018-08-10 12:47 UTC (3+ messages)
` [PATCH v7 3/3] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
[PATCH v2 3/5] soc: renesas: rcar-rst: Add support for RZ/G2M
2018-08-10 11:14 UTC (3+ messages)
[PATCH v2 0/5] Add RZ/G2M SYSC/RST/Clock support
2018-08-10 11:09 UTC (4+ messages)
` [PATCH v2 1/5] dt-bindings: power: Add r8a774a1 SYSC power domain definitions
[PATCH v6 0/6] iio: accel: Add adxl372 driver
2018-08-10 10:38 UTC (8+ messages)
` [PATCH v6 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
` [PATCH v6 2/6] dt-bindings: iio: accel: Add docs for ADXL372
` [PATCH v6 3/6] regmap: Add regmap_noinc_read API
` [PATCH v6 4/6] iio:adxl372: Add FIFO and interrupts support
` [PATCH v6 5/6] iio:adxl372: Add sampling frequency support
` [PATCH v6 6/6] iio:adxl372: Add filter bandwidth support
[PATCH v3 0/4] pci-dra7xx: Enable errata i870 workaround for RC mode
2018-08-10 10:07 UTC (3+ messages)
[PATCH 0/2] clk: meson-g12a: Add AO clock controller driver
2018-08-10 9:54 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: clk: meson-g12a: Add G12A AO Clock Bindings
` [PATCH 2/2] clk: meson-g12a: Add AO Clock controller driver
[PATCH v3 0/9] Add Reset Controller support for Actions Semi Owl SoCs
2018-08-10 9:51 UTC (10+ messages)
` [PATCH v3 1/9] clk: actions: Cache regmap info in private clock descriptor
` [PATCH v3 2/9] dt-bindings: clock: Add reset controller bindings for Actions Semi Owl SoCs
` [PATCH v3 3/9] dt-bindings: reset: Add binding constants for Actions Semi S700 RMU
` [PATCH v3 4/9] dt-bindings: reset: Add binding constants for Actions Semi S900 RMU
` [PATCH v3 5/9] arm64: dts: actions: Add Reset Controller support for S700 SoC
` [PATCH v3 6/9] arm64: dts: actions: Add Reset Controller support for S900 SoC
` [PATCH v3 7/9] clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support
` [PATCH v3 8/9] clk: actions: Add Actions Semi S700 SoC "
` [PATCH v3 9/9] clk: actions: Add Actions Semi S900 "
[PATCH v3 0/2] clk: meson-g12a: Add EE clock controller driver
2018-08-10 8:47 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
` [PATCH v3 2/2] clk: meson-g12a: Add EE Clock controller driver
[PATCH v2 00/18] MIPS: intel: add initial support for Intel MIPS SoCs
2018-08-10 8:13 UTC (6+ messages)
` [PATCH v2 08/18] serial: intel: Get serial id from dts
[PATCH v3 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845
2018-08-10 8:08 UTC (4+ messages)
` [PATCH v3 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
[PATCH 0/4] soc: amlogic: add meson-canvas driver
2018-08-10 7:49 UTC (5+ messages)
` [PATCH 4/4] drm/meson: convert to the new canvas module
[PATCH 1/3] clk: imx6q: reset exclusive gates on init
2018-08-10 7:45 UTC (5+ messages)
` [PATCH 2/3] clk: imx6q: optionally get CCM inputs via standard clock handles
` [PATCH 3/3] clk: imx6q: handle ENET PLL bypass
[PATCH v4 4/6] iio:adxl372: Add FIFO and interrupts support
2018-08-10 7:20 UTC (2+ messages)
[PATCH v2 0/4] soc: amlogic: add meson-canvas
2018-08-10 6:42 UTC (5+ messages)
` [PATCH v2 3/4] ARM64: dts: meson-gx: add dmcbus and canvas nodes
[PATCH v3 0/4] Add i.MX8MQ clock driver
2018-08-10 6:03 UTC (7+ messages)
` [PATCH v3 1/4] dt-bindings: add binding for i.MX8MQ CCM
` [PATCH v3 2/4] clk: imx: add fractional PLL output clock
` [PATCH v3 3/4] clk: imx: add SCCG PLL type
` [PATCH v3 4/4] clk: imx: add clock driver for i.MX8MQ CCM
[PATCH v1 00/10] Another round of tsens cleanups
2018-08-10 4:50 UTC (8+ messages)
` [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
` [PATCH v1 02/10] dt-bindings: thermal: Fix a typo in documentation
` [PATCH v1 09/10] arm64: dts: qcom: Add reg-names for all tsens nodes
[PATCH v2 2/4] phy: socionext: add USB3 PHY driver for UniPhier SoC
2018-08-10 2:30 UTC (3+ messages)
[RFC PATCH v2 0/4] sysfs interface to miscellaneous BMC controls and fields
2018-08-10 0:22 UTC (16+ messages)
` [RFC PATCH v2 1/4] dt-bindings: misc: Add bindings for misc. BMC control fields
[PATCH] net: ethernet: cpsw-phy-sel: prefer phandle for phy sel and update binding
2018-08-09 22:47 UTC (5+ messages)
[PATCH 1/2] regulator: maxim: Add SPDX license identifiers
2018-08-09 22:41 UTC (2+ messages)
[PATCH 1/3] clk: max77686: Add SPDX license identifiers
2018-08-09 22:41 UTC (3+ messages)
` [PATCH 2/3] clk: s2mps11,s3c64xx: "
[PATCH 0/8] Add support for drm/rockchip to dynamically control the DDR frequency
2018-08-09 22:41 UTC (3+ messages)
` [PATCH 7/8] arm64: dts: rk3399: Add dfi and dmc nodes
[PATCH v2] rcar-vin: add R8A77980 support
2018-08-09 22:41 UTC (2+ messages)
[PATCH v2 1/2] dt: bindings: lm3697: Add bindings for lm3697 driver
2018-08-09 21:59 UTC (12+ messages)
[PATCH v5 0/6] iio: accel: Add adxl372 driver
2018-08-09 21:34 UTC (3+ messages)
` [PATCH v5 2/6] dt-bindings: iio: accel: Add docs for ADXL372
[PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
2018-08-09 21:28 UTC (3+ messages)
` [PATCH v6 3/5] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
MHI code review
2018-08-09 20:17 UTC (5+ messages)
` [PATCH v2 1/7] mhi_bus: core: initial checkin for modem host interface bus driver
` [PATCH v2 5/7] mhi_bus: core: add support to get external modem time
[PATCH] arm64: dts: rockchip: Add idle-states to device tree for rk3399
2018-08-09 20:09 UTC (2+ messages)
[PATCH v3] dt-bindings: media: adv748x: Document re-mappable addresses
2018-08-09 19:29 UTC
[PATCH v8 0/5] Support for Qualcomm UFS QMP PHY on SDM845
2018-08-09 18:00 UTC (7+ messages)
` [PATCH v8 3/5] phy: Add QMP phy based UFS phy support for sdm845
` [PATCH v8 4/5] scsi: ufs: Power on phy after it is initialized
[PATCH 00/40] Tegra SDHCI add support for HS200 and UHS signaling
2018-08-09 16:36 UTC (11+ messages)
` [PATCH 01/40] dt-bindings: Add Tegra PMC pad configuration bindings
` [PATCH 02/40] dt-bindings: mmc: tegra: Add pad voltage control properties
` [PATCH 13/40] mmc: tegra: Poll for calibration completion
[PATCH 00/21] TVP5150 fixes and new features
2018-08-09 16:34 UTC (10+ messages)
` [PATCH 19/22] [media] tvp5150: add input source selection of_graph support
[PATCH v1 0/3] Add a driver for Qualcomm GENI I3C master IP
2018-08-09 15:18 UTC (5+ messages)
` [PATCH v1 1/3] i3c: master: "
` [PATCH v1 2/3] dt-bindings: i3c: Document Qualcomm GENI I3C master bindings
[PATCH 0/8] Tegra SDHCI support HS400 on Tegra210 and Tegra186
2018-08-09 14:09 UTC (15+ messages)
` [PATCH 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI
` [PATCH 3/8] mmc: tegra: Implement HS400 enhanced strobe
` [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).