messages from 2018-08-10 09:51:07 to 2018-08-13 07:30:25 UTC [more...]
[PATCH v2] pinctrl: qcom: Add sdm660 pinctrl driver
2018-08-13 7:30 UTC (3+ messages)
[PATCH 1/4] ARM: dts: exynos: Add missing used PMIC regulators on Exynos5422 Odroid boards
2018-08-13 7:13 UTC (5+ messages)
[PATCH v3 1/3] power: supply: Add support for the Qualcomm Battery Monitoring System
2018-08-13 6:55 UTC (5+ messages)
` [PATCH] clk: qcom: Add Global Clock controller (GCC) driver for SDM660
` [RFC PATCH] clk: qcom: gcc_sdm660_hws[] can be static
[PATCH 0/3] Enable smmu support on sdm845
2018-08-13 5:29 UTC (5+ messages)
` [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
[LKP] 315706049c [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/x86/mm/pageattr.c:1211 __cpa_process_fault
2018-08-13 4:42 UTC
[PATCH v2 0/3] Add Actions Semi Owl family sirq support
2018-08-13 4:34 UTC (5+ messages)
` [PATCH v2 1/3] dt-bindings: interrupt-controller: Actions external interrupt controller
` [PATCH v2 2/3] drivers/irqchip: Add Actions external interrupts support
` [PATCH v2 3/3] arm64: dts: actions: Add sirq node for Actions Semi S700
[RFC PATCH 0/7] add at91sam9 LCDC DRM driver
2018-08-12 19:55 UTC (9+ messages)
` [PATCH v1 1/7] atmel-hlcdc: renamed directory to drm/atmel/
` [PATCH v1 2/7] dt-binding: add bindings for Atmel LCDC mfd
` [PATCH v1 3/7] mfd: add atmel-lcdc driver
` [PATCH v1 4/7] dt-bindings: add bindings for Atmel LCDC pwm
` [PATCH v1 5/7] pwm: add pwm-atmel-lcdc driver
` [PATCH v1 6/7] dt-bindings: add bindings for Atmel lcdc-display-controller
` [PATCH v1 7/7] drm: add Atmel LCDC display controller support
[PATCH 0/3] Meson8/Meson8b: introduce a HHI syscon node
2018-08-12 18:35 UTC (6+ messages)
` [PATCH 1/3] dt-bindings: clock: meson8b: use the registers from the HHI syscon
[RFC net-next 00/15] net: A socket API for LoRa
2018-08-12 17:59 UTC (12+ messages)
[PATCH] arm64: dts: rockchip: Add idle-states to device tree for rk3399
2018-08-12 16:24 UTC (3+ messages)
[v0.1 PATCH 0/7] mmc: tmio: refactor TMIO core a bit and add UniPhier SD/eMMC controller support
2018-08-12 16:24 UTC (2+ messages)
Investment opportunity
2018-08-12 10:31 UTC
[PATCH V2] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support
2018-08-12 14:23 UTC
[PATCH] pinctrl: qcom: Add sdm660 pinctrl driver
2018-08-12 13:04 UTC (5+ messages)
[PATCH] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support
2018-08-12 7:06 UTC (3+ messages)
[PATCH 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb
2018-08-12 7:06 UTC (5+ messages)
` [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
` [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
` [PATCH 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB
[v3 PATCH 0/2] arm64: dts: Add sdm845 GPU/GMU and SMMU
2018-08-12 1:23 UTC (4+ messages)
` [PATCH 2/2] arm64: dts: sdm845: Add gpu and gmu device nodes
[PATCH 1/3] iio: dac: add support for ltc166x
2018-08-11 20:02 UTC (3+ messages)
` [PATCH 2/3] dt-bindings: iio: dac: add bindings "
` [PATCH 3/3] MAINTAINERS: add entry for ltc166x DAC driver
[PATCH] firmware: qcom: scm: Add sdm660 soc compatible
2018-08-11 16:24 UTC
[PATCH] soc: qcom: smd-rpm: Add sdm660 compatible
2018-08-11 16:24 UTC
[PATCH v6 1/2] iio: light: Add support for vishay vcnl4035
2018-08-11 15:25 UTC (2+ messages)
[PATCH 1/2] clk: Add a driver for the Xilinx Clocking Wizard block
2018-08-11 13:41 UTC (4+ messages)
` [PATCH 2/2] dt-bindings: clock: Add bindings for the Clocking Wizard IP
[PATCH v1 0/4] Add EDAC driver for QCOM SoCs
2018-08-11 0:14 UTC (10+ messages)
` [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
` [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
[PATCH 0/3] arm64: dts: qcom: pm8998: Add ADC node and die temperature channel
2018-08-11 0:10 UTC (5+ messages)
` [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
` [PATCH 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
send your photos
2018-08-10 9:38 UTC
[PATCH 03/11] dt-bindings: interrupt-controller: RISC-V PLIC documentation
2018-08-10 20:09 UTC (4+ messages)
[PATCH v9 0/2] regulator: add QCOM RPMh regulator driver
2018-08-10 20:07 UTC (4+ messages)
` [PATCH v9 2/2] "
[PATCH v4 0/6] iio: accel: Add adxl372 driver
2018-08-10 19:58 UTC (5+ messages)
` [PATCH v4 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
` [PATCH v4 5/6] iio:adxl372: Add sampling frequency support
[PATCH v6 0/6] iio: accel: Add adxl372 driver
2018-08-10 18:21 UTC (5+ messages)
` [PATCH v6 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
` [PATCH v6 3/6] regmap: Add regmap_noinc_read API
[PATCH v2 0/8] Tegra SDHCI support HS400 on Tegra210 and Tegra186
2018-08-10 18:14 UTC (9+ messages)
` [PATCH v2 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI
` [PATCH v2 2/8] mmc: tegra: Parse and program DQS trim value
` [PATCH v2 3/8] mmc: tegra: Implement HS400 enhanced strobe
` [PATCH v2 4/8] mmc: tegra: Implement HS400 delay line calibration
` [PATCH v2 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
` [PATCH v2 6/8] arm64: dts: tegra210: "
` [PATCH v2 7/8] arm64: dts: tegra186: Enable HS400
` [PATCH v2 8/8] arm64: dts: tegra210: "
[PATCH v2 00/40] Tegra SDHCI add support for HS200 and UHS signaling
2018-08-10 18:08 UTC (41+ messages)
` [PATCH v2 01/40] dt-bindings: Add Tegra PMC pad configuration bindings
` [PATCH v2 02/40] dt-bindings: mmc: tegra: Add pad voltage control properties
` [PATCH v2 03/40] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
` [PATCH v2 04/40] dt-bindings: mmc: Add Tegra SDHCI sampling trimmer values
` [PATCH v2 05/40] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
` [PATCH v2 06/40] soc/tegra: pmc: Factor out DPD register bit calculation
` [PATCH v2 07/40] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
` [PATCH v2 08/40] soc/tegra: pmc: Use X macro to generate IO pad tables
` [PATCH v2 09/40] soc/tegra: pmc: Remove public pad voltage APIs
` [PATCH v2 10/40] soc/tegra: pmc: Implement pad configuration via pinctrl
` [PATCH v2 11/40] mmc: sdhci: Add a quirk to skip clearing the transfer mode register on tuning
` [PATCH v2 12/40] mmc: tegra: Reconfigure pad voltages during voltage switching
` [PATCH v2 13/40] mmc: tegra: Poll for calibration completion
` [PATCH v2 14/40] mmc: tegra: Set calibration pad voltage reference
` [PATCH v2 15/40] mmc: tegra: Power on the calibration pad
` [PATCH v2 16/40] mmc: tegra: Disable card clock during pad calibration
` [PATCH v2 17/40] mmc: tegra: Program pad autocal offsets from dt
` [PATCH v2 18/40] mmc: tegra: Perform pad calibration after voltage switch
` [PATCH v2 19/40] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
` [PATCH v2 20/40] mmc: tegra: Add a workaround for tap value change glitch
` [PATCH v2 21/40] mmc: tegra: Parse default trim and tap from dt
` [PATCH v2 22/40] mmc: tegra: Configure default tap values
` [PATCH v2 23/40] mmc: tegra: Configure default trim value on reset
` [PATCH v2 24/40] mmc: tegra: Use standard SDHCI tuning on Tegra210 and Tegra186
` [PATCH v2 25/40] mmc: sdhci: Add a quirk to disable card clock during tuning
` [PATCH v2 26/40] mmc: tegra: Enable workaround for tuning transfer mode bug
` [PATCH v2 27/40] mmc: tegra: Set SDHCI_QUIRK2_TUNE_DIS_CARD_CLK on Tegra210
` [PATCH v2 28/40] mmc: tegra: Enable UHS and HS200 modes for Tegra210
` [PATCH v2 29/40] mmc: tegra: Enable UHS and HS200 modes for Tegra186
` [PATCH v2 30/40] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
` [PATCH v2 31/40] arm64: dts: Add Tegra186 "
` [PATCH v2 32/40] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
` [PATCH v2 33/40] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
` [PATCH v2 34/40] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
` [PATCH v2 35/40] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
` [PATCH v2 36/40] arm64: dts: tegra210: "
` [PATCH v2 37/40] arm64: dts: tegra210: Add SDHCI tap and trim values
` [PATCH v2 38/40] arm64: dts: tegra186: "
` [PATCH v2 39/40] arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
` [PATCH v2 40/40] arm64: dts: tegra210: "
[PATCH 0/2] arm64: dts: meson-g12a: Introduce new DT files for Meson-G12A SoC
2018-08-10 18:07 UTC (4+ messages)
` [PATCH 2/2] arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
[PATCH 0/4] Add HiSilicon Hi3670 SoC and HiKey970 board
2018-08-10 17:53 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: arm: hisilicon: Add binding for Hi3670 SoC
` [PATCH 2/4] arm64: dts: Add devicetree for Hisilicon "
` [PATCH 3/4] dt-bindings: arm: hisilicon: Add binding for HiKey970 board
` [PATCH 4/4] arm64: dts: Add devicetree support "
[PATCH RESEND RFC 0/4] Wakeup GPIO support for SDM845 SoC
2018-08-10 16:15 UTC (12+ messages)
` [PATCH RESEND RFC 1/4] drivers: pinctrl: qcom: add wakeup capability to GPIO
[PATCH v2 0/11] Add R8A7745/SK-RZG1E board support
2018-08-10 15:53 UTC (4+ messages)
` [PATCH] arm64: dts: renesas: r8a77980: add CSI2/VIN support
[PATCH v2 2/5] soc: renesas: rcar-sysc: Add r8a774a1 support
2018-08-10 15:50 UTC (4+ messages)
[PATCH v2 4/5] clk: renesas: Add r8a774a1 CPG Core Clock Definitions
2018-08-10 15:40 UTC (3+ messages)
[PATCH 0/3] i.MX PXP scaler/CSC driver
2018-08-10 15:20 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: media: Add i.MX Pixel Pipeline binding
` [PATCH 2/3] ARM: dts: imx6ull: add pxp support
` [PATCH 3/3] media: imx-pxp: add i.MX Pixel Pipeline driver
[PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
2018-08-10 15:11 UTC (2+ messages)
[PATCH] arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses
2018-08-10 12:30 UTC (3+ messages)
[PATCH v8 0/8] Introduce on-chip interconnect API
2018-08-10 14:52 UTC (9+ messages)
` [PATCH v8 1/8] interconnect: Add generic "
` [PATCH v8 2/8] dt-bindings: Introduce interconnect binding
` [PATCH v8 3/8] interconnect: Allow endpoints translation via DT
` [PATCH v8 4/8] interconnect: Add debugfs support
` [PATCH v8 5/8] interconnect: qcom: Add RPM communication
` [PATCH v8 6/8] dt-bindings: interconnect: Document qcom,msm8916 NoC bindings
` [PATCH v8 7/8] interconnect: qcom: Add msm8916 interconnect provider driver
` [PATCH v8 8/8] MAINTAINERS: add a maintainer for the interconnect API
[PATCH v7 00/12] media: staging/imx7: add i.MX7 media driver
2018-08-10 14:20 UTC (13+ messages)
` [PATCH v7 01/12] media: staging/imx: refactor imx media device probe
` [PATCH v7 02/12] media: staging/imx: rearrange group id to take in account IPU
` [PATCH v7 03/12] media: staging/imx7: add imx7 CSI subdev driver
` [PATCH v7 04/12] media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7
` [PATCH v7 05/12] media: dt-bindings: add bindings for i.MX7 media driver
` [PATCH v7 06/12] ARM: dts: imx7s: add mipi phy power domain
` [PATCH v7 07/12] ARM: dts: imx7s: add multiplexer controls
` [PATCH v7 08/12] ARM: dts: imx7: Add video mux, csi and mipi_csi and connections
` [PATCH v7 09/12] ARM: dts: imx7s-warp: add ov2680 sensor node
` [PATCH v7 10/12] media: imx7.rst: add documentation for i.MX7 media driver
` [PATCH v7 11/12] media: staging/imx: add i.MX7 entries to TODO file
` [PATCH v7 12/12] media: video-mux: add bayer formats
[PATCH v3 0/5] Add GPIO and EAVB Pinctrl support
2018-08-10 13:47 UTC (8+ messages)
` [PATCH v3 3/5] ARM: dts: r8a77470: Add GPIO support
` [PATCH v3 4/5] ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ
` [PATCH v3 5/5] ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB
[PATCH v6 00/24] Ingenic TCU patchset v6
2018-08-10 13:38 UTC (9+ messages)
` [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
` [PATCH v6 09/24] watchdog: jz4740: Use regmap "
` [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
` [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
[PATCH 00/21] V4L2 fwnode rework; support for default configuration
2018-08-10 10:38 UTC (2+ messages)
[PATCH v8 0/4] drm/atmel-hlcdc: bus-width override support
2018-08-10 13:03 UTC (5+ messages)
` [PATCH v8 1/4] dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185
` [PATCH v8 2/4] dt-bindings: display: atmel: optional video-interface of endpoints
` [PATCH v8 3/4] drm/atmel-hlcdc: iterate over all output endpoints
` [PATCH v8 4/4] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
[PATCH v7 0/3] drm/atmel-hlcdc: bus-width override support
2018-08-10 12:47 UTC (3+ messages)
` [PATCH v7 3/3] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes
[PATCH v2 3/5] soc: renesas: rcar-rst: Add support for RZ/G2M
2018-08-10 11:14 UTC (3+ messages)
[PATCH v2 0/5] Add RZ/G2M SYSC/RST/Clock support
2018-08-10 11:09 UTC (4+ messages)
` [PATCH v2 1/5] dt-bindings: power: Add r8a774a1 SYSC power domain definitions
[PATCH v3 0/4] pci-dra7xx: Enable errata i870 workaround for RC mode
2018-08-10 10:07 UTC (3+ messages)
[PATCH 0/2] clk: meson-g12a: Add AO clock controller driver
2018-08-10 9:54 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: clk: meson-g12a: Add G12A AO Clock Bindings
` [PATCH 2/2] clk: meson-g12a: Add AO Clock controller driver
[PATCH v3 0/9] Add Reset Controller support for Actions Semi Owl SoCs
2018-08-10 9:51 UTC (8+ messages)
` [PATCH v3 3/9] dt-bindings: reset: Add binding constants for Actions Semi S700 RMU
` [PATCH v3 4/9] dt-bindings: reset: Add binding constants for Actions Semi S900 RMU
` [PATCH v3 5/9] arm64: dts: actions: Add Reset Controller support for S700 SoC
` [PATCH v3 6/9] arm64: dts: actions: Add Reset Controller support for S900 SoC
` [PATCH v3 7/9] clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support
` [PATCH v3 8/9] clk: actions: Add Actions Semi S700 SoC "
` [PATCH v3 9/9] clk: actions: Add Actions Semi S900 "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).