messages from 2018-08-29 23:15:04 to 2018-08-30 15:45:04 UTC [more...]
[PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
2018-08-30 15:45 UTC (17+ messages)
` [PATCH v3 01/30] mfd: Makefile: Remove build option for MFD:sun4i-gpadc
` [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
` [PATCH v3 03/30] iio: adc: Remove ID table
` [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options
` [PATCH v3 05/30] iio: adc: move SUN4I_GPADC_CHANNEL define to header file
` [PATCH v3 06/30] iio: adc: remove ofnode options
` [PATCH v3 07/30] iio: adc: remove mfd_probe & sunwi_irq_init function
` [PATCH v3 08/30] iio: adc: remove hwmon structure
` [PATCH v3 09/30] iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel
` [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling
` [PATCH v3 11/30] iio: adc: add new compatibles
` [PATCH v3 12/30] mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
` [PATCH v3 13/30] arm: config: Enable SUN4I_GPADC in defconfig
` [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
` [PATCH v3 15/30] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
` [PATCH v3 16/30] iio: adc: sun4i-gpadc-iio: rework: readout temp_data
[PATCH 0/4] media: platform: Add Aspeed Video Engine driver
2018-08-30 15:40 UTC (4+ messages)
` [PATCH 4/4] "
[PATCH 0/3] Add Xilinx AMS Driver
2018-08-30 15:36 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
` [PATCH 2/3] iio: adc: Add Xilinx AMS driver
` [PATCH 3/3] arm64: zynqmp: DT: Add Xilinx AMS node
[RFT 7/8] arm64: dts: r8a77990: Add I2C device nodes
2018-08-30 15:18 UTC (2+ messages)
[PATCH v3 00/38] Tegra SDHCI add support for HS200 and UHS signaling
2018-08-30 15:06 UTC (39+ messages)
` [PATCH v3 01/38] dt-bindings: Add Tegra PMC pad configuration bindings
` [PATCH v3 02/38] dt-bindings: mmc: tegra: Add pad voltage control properties
` [PATCH v3 03/38] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
` [PATCH v3 04/38] dt-bindings: mmc: Add Tegra SDHCI sampling trimmer values
` [PATCH v3 05/38] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
` [PATCH v3 06/38] soc/tegra: pmc: Factor out DPD register bit calculation
` [PATCH v3 07/38] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
` [PATCH v3 08/38] soc/tegra: pmc: Use X macro to generate IO pad tables
` [PATCH v3 09/38] soc/tegra: pmc: Remove public pad voltage APIs
` [PATCH v3 10/38] soc/tegra: pmc: Implement pad configuration via pinctrl
` [PATCH v3 11/38] mmc: tegra: Reconfigure pad voltages during voltage switching
` [PATCH v3 12/38] mmc: tegra: Poll for calibration completion
` [PATCH v3 13/38] mmc: tegra: Set calibration pad voltage reference
` [PATCH v3 14/38] mmc: tegra: Power on the calibration pad
` [PATCH v3 15/38] mmc: tegra: Disable card clock during pad calibration
` [PATCH v3 16/38] mmc: tegra: Program pad autocal offsets from dt
` [PATCH v3 17/38] mmc: tegra: Perform pad calibration after voltage switch
` [PATCH v3 18/38] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
` [PATCH v3 19/38] mmc: tegra: Add a workaround for tap value change glitch
` [PATCH v3 20/38] mmc: tegra: Parse default trim and tap from dt
` [PATCH v3 21/38] mmc: tegra: Configure default tap values
` [PATCH v3 22/38] mmc: tegra: Configure default trim value on reset
` [PATCH v3 23/38] mmc: tegra: Use standard SDHCI tuning on Tegra210 and Tegra186
` [PATCH v3 24/38] mmc: tegra: Remove tegra_sdhci_writew() from tegra210_sdhci_ops
` [PATCH v3 25/38] mmc: tegra: Disable card clock during tuning cmd on Tegra210
` [PATCH v3 26/38] mmc: tegra: Enable UHS and HS200 modes for Tegra210
` [PATCH v3 27/38] mmc: tegra: Enable UHS and HS200 modes for Tegra186
` [PATCH v3 28/38] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
` [PATCH v3 29/38] arm64: dts: Add Tegra186 "
` [PATCH v3 30/38] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
` [PATCH v3 31/38] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
` [PATCH v3 32/38] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
` [PATCH v3 33/38] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
` [PATCH v3 34/38] arm64: dts: tegra210: "
` [PATCH v3 35/38] arm64: dts: tegra210: Add SDHCI tap and trim values
` [PATCH v3 36/38] arm64: dts: tegra186: "
` [PATCH v3 37/38] arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
` [PATCH v3 38/38] arm64: dts: tegra210: "
[PATCH 0/3] Add USB support
2018-08-30 14:50 UTC (11+ messages)
` [PATCH 1/3] arm64: dts: renesas: r8a774a1: Add USB2.0 phy and host(EHCI/OHCI) device nodes
` [PATCH 2/3] arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB "
` [PATCH 3/3] arm64: dts: renesas: r8a774a1: Add USB3.0 "
[PATCH v2] clk: renesas: cpg-mssr: Add R7S9210 support
2018-08-30 14:49 UTC (5+ messages)
[PATCH v16 0/5] iommu/arm-smmu: Add runtime pm/sleep support
2018-08-30 14:45 UTC (6+ messages)
` [PATCH v16 1/5] iommu/arm-smmu: Add pm_runtime/sleep ops
` [PATCH v16 2/5] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device
` [PATCH v16 3/5] iommu/arm-smmu: Add the device_link between masters and smmu
` [PATCH v16 4/5] dt-bindings: arm-smmu: Add bindings for qcom, smmu-v2
` [PATCH v16 5/5] iommu/arm-smmu: Add support for qcom, smmu-v2 variant
[PATCH v2] remoteproc: qcom: Introduce Non-PAS ADSP PIL driver
2018-08-30 14:16 UTC (3+ messages)
[PATCHv8 0/9] Add Intel Stratix10 FPGA manager and service layer
2018-08-30 14:05 UTC (4+ messages)
` [PATCHv8 7/9] defconfig: enable fpga "
[Patch v15 0/5] iommu/arm-smmu: Add runtime pm/sleep support
2018-08-30 13:59 UTC (10+ messages)
` [Patch v15 2/5] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device
` [Patch v15 4/5] dt-bindings: arm-smmu: Add bindings for qcom, smmu-v2
` [Patch v15 4/5] dt-bindings: arm-smmu: Add bindings for qcom,smmu-v2
[PATCH v2 0/2] add the Amlogic Meson PCIe controller driver
2018-08-30 13:59 UTC (8+ messages)
` [PATCH v2 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
[PATCH v6 00/10] Add the I3C subsystem
2018-08-30 13:57 UTC (10+ messages)
` [PATCH v6 01/10] i3c: Add core I3C infrastructure
[PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin
2018-08-30 13:46 UTC (3+ messages)
[PATCH 0/2] clocksource: ostm: Add support for RZ/A2
2018-08-30 9:38 UTC (12+ messages)
` [PATCH 1/2] clocksource/drivers/ostm: Delay driver registration
[PATCH v4 1/7] dmaengine: xilinx_dma: commonize DMA copy size calculation
2018-08-30 13:27 UTC (6+ messages)
` [PATCH v4 2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
[PATCH v2 0/2] GPIO: add single-register GPIO via CREG driver
2018-08-30 13:12 UTC (8+ messages)
` [PATCH v2 1/2] GPIO: add single-register gpio via creg driver
` [PATCH v2 2/2] dt-bindings: Document the Synopsys GPIO via CREG bindings
[PATCH v2 0/2] Add R8A77980/Condor PCIe support
2018-08-30 12:32 UTC (5+ messages)
` [PATCH v3 1/2] arm64: dts: renesas: r8a77980: add "
` [PATCH v3 2/2] arm64: dts: renesas: condor: "
[PATCH] arm64: dts: renesas: r8a774a1: Add CAN nodes
2018-08-30 12:26 UTC (3+ messages)
[PATCH v2 9/9] arm64: dts: renesas: r8a774a1: Add FCPF and FCPV instances
2018-08-30 12:25 UTC (4+ messages)
` [PATCH v3 "
[PATCH 0/9] Add more support for r8a774a1
2018-08-30 12:25 UTC (24+ messages)
` [PATCH 1/9] arm64: dts: renesas: r8a774a1: Add SDHI nodes
` [PATCH 2/9] arm64: dts: renesas: r8a774a1: Add I2C and IIC-DVFS support
` [PATCH 3/9] arm64: dts: renesas: r8a774a1: Add RZ/G2M thermal support
` [PATCH 4/9] arm64: dts: renesas: r8a774a1: Add IPMMU device nodes
` [PATCH 5/9] arm64: dts: renesas: r8a774a1: Add all MSIOF nodes
` [PATCH 6/9] arm64: dts: renesas: r8a774a1: Add Cortex-A53 CPU cores
` [PATCH 7/9] arm64: dts: renesas: r8a774a1: Add PWM device nodes
` [PATCH 8/9] arm64: dts: renesas: r8a774a1: Add audio support
[PATCH] arm64: dts: renesas: r8a774a1: Add GPIO device nodes
2018-08-30 12:19 UTC (3+ messages)
[PATCH] arm64: dts: renesas: r8a774a1: Add pinctrl device node
2018-08-30 12:17 UTC (3+ messages)
[PATCH 0/5] Add SYS-DMAC/INTC-EX/[H]SCIF/EAVB/RWDT support
2018-08-30 12:16 UTC (18+ messages)
` [PATCH 1/5] arm64: dts: renesas: r8a774a1: Add SYS-DMAC controller nodes
` [PATCH 2/5] arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes
` [PATCH 3/5] arm64: dts: renesas: r8a774a1: Add INTC-EX device node
` [PATCH 4/5] arm64: dts: renesas: r8a774a1: Add Ethernet AVB node
` [PATCH 5/5] arm64: dts: renesas: r8a774a1: Add RWDT node
[PATCH v3 0/4] Add EDAC driver for QCOM SoCs
2018-08-30 12:11 UTC (3+ messages)
` [PATCH v3 3/4] drivers: edac: Add EDAC driver support "
[PATCH 0/6] Document r8a774a1 USB bindings
2018-08-30 12:09 UTC (14+ messages)
` [PATCH 1/6] dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support
` [PATCH 2/6] dt-bindings: rcar-gen3-phy-usb3: "
` [PATCH 3/6] dt-bindings: usb-xhci: "
` [PATCH 4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
` [PATCH 5/6] dt-bindings: usb: renesas_usbhs: Add r8a774a1 support
` [PATCH 6/6] usb: gadget: udc: renesas_usb3: "
[PATCH] drm/rockchip: vop: add rk3188 vop definitions
2018-08-30 12:01 UTC (2+ messages)
[PATCH 0/2] dw9807 bindings and driver are just for VCM
2018-08-30 10:55 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: dw9714, dw9807-vcm: Add files to MAINTAINERS, rename files
[andriy.shevchenko@linux.intel.com: Re: [PATCH] spi: dw-mmio: add MSCC Jaguar2 support]
2018-08-30 10:50 UTC (4+ messages)
[PATCH v8 0/5] Support for Qualcomm UFS QMP PHY on SDM845
2018-08-30 10:44 UTC (3+ messages)
[PATCH 1/2] ASoC: Add driver for PROTO Audio CODEC (with a WM8731)
2018-08-30 10:13 UTC (4+ messages)
` [PATCH] ASoC: fix platform_no_drv_owner.cocci warnings
[PATCH] arm64: dts: ls208xa: add second duart
2018-08-30 9:00 UTC
[PATCH v2] dt-binding: arm/cpus.txt: fix dynamic-power-coefficient unit
2018-08-30 8:46 UTC (2+ messages)
[PATCH v4 0/6] Add power domain driver for corners on msm8996/sdm845
2018-08-30 8:21 UTC (7+ messages)
` [PATCH v4 2/6] dt-bindings: power: Add qcom rpm power domain driver bindings
[RESEND PATCH 1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
2018-08-30 8:15 UTC (4+ messages)
` [RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
` [RESEND PATCH 3/4] arm64: dts: marvell: add macro to make distinction between node names
` [RESEND PATCH 4/4] arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
[PATCH v3 0/2] add the Amlogic Meson PCIe controller driver
2018-08-30 8:13 UTC (2+ messages)
` [PATCH v3 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
[PATCH 0/3] arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
2018-08-30 8:09 UTC (4+ messages)
` [PATCH 1/3] ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
` [PATCH 2/3] ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
` [PATCH 3/3] arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
[PATCH] dt-bindings: reset: imx7: update the compatible string
2018-08-30 8:05 UTC
[PATCH v2 0/2] add the Amlogic Meson PCIe phy driver
2018-08-30 7:50 UTC (4+ messages)
` [PATCH v2 1/2] dt-bindings: phy: add DT bindings for Amlogic Meson PCIe Phy controller
Re:[PATCH v7 2/8] dt-bindings: Introduce interconnect provider bindings
2018-08-30 7:47 UTC (7+ messages)
` [PATCH "
[PATCH 0/5] arm64: dts: NXP: add basic dts file for LX2160A SoC
2018-08-30 7:36 UTC (4+ messages)
` [PATCH 3/5] drivers: clk-qoriq: Add clockgen support for lx2160a
[PATCH v5 00/14] Add System Error Interrupt support to Armada SoCs
2018-08-30 7:35 UTC (15+ messages)
` [PATCH v5 01/14] genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
` [PATCH v5 02/14] dt-bindings/interrupt-controller: fix Marvell ICU length in the example
` [PATCH v5 03/14] irqchip/irq-mvebu-icu: fix wrong private data retrieval
` [PATCH v5 04/14] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts
` [PATCH v5 05/14] irqchip/irq-mvebu-icu: disociate ICU and NSR
` [PATCH v5 06/14] irqchip/irq-mvebu-icu: support ICU subnodes
` [PATCH v5 07/14] irqchip/irq-mvebu-sei: add new driver for Marvell SEI
` [PATCH v5 08/14] arm64: marvell: enable SEI driver
` [PATCH v5 09/14] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI)
` [PATCH v5 10/14] dt-bindings/interrupt-controller: update Marvell ICU bindings
` [PATCH v5 11/14] dt-bindings/interrupt-controller: add documentation for Marvell SEI controller
` [PATCH v5 12/14] arm64: dts: marvell: add AP806 SEI subnode
` [PATCH v5 13/14] arm64: dts: marvell: use new bindings for CP110 interrupts
` [PATCH v5 14/14] arm64: dts: marvell: add CP110 ICU SEI subnode
[PATCH v6 0/2] Input: Add Cypress Gen5 Touchscreen driver
2018-08-30 7:24 UTC (8+ messages)
[PATCH] ARM: dts: imx6sx-sdb: enable gpio buttons as wakeup source
2018-08-30 6:59 UTC
[PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
2018-08-30 5:25 UTC (3+ messages)
[PATCH] ARM: dts: imx6ull: update iomux header
2018-08-30 5:20 UTC
[PATCH 0/3] ARM: dts: am335x: add support for Moxa UC-2100 series
2018-08-30 4:09 UTC (4+ messages)
` [PATCH 1/3] ARM: dts: am335x: add common file for "
` [PATCH 2/3] ARM: dts: am335x: add support for Moxa UC-2101 open platform
` [PATCH 3/3] ARM: dts: am335x: add support for Moxa UC-2102 "
[PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader
2018-08-30 3:53 UTC (2+ messages)
[PATCH v3 0/9] Add Reset Controller support for Actions Semi Owl SoCs
2018-08-30 3:19 UTC (2+ messages)
[PATCH 0/4] Add HiSilicon Hi3670 SoC and HiKey970 board
2018-08-30 3:14 UTC (2+ messages)
[PATCH 1/2] dt-bindings: power: Add Spreadtrum SC2731 charger documentation
2018-08-30 3:08 UTC (6+ messages)
` [PATCH 2/2] power: supply: Add Spreadtrum SC2731 charger support
[PATCH] thermal: qoriq: add i.mx8mq support
2018-08-30 2:14 UTC
[PATCH 1/2] dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandle
2018-08-30 1:18 UTC (4+ messages)
[PATCH v3] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-30 1:16 UTC
[PATCH v2] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-30 1:12 UTC (3+ messages)
[PATCH v2] sh_eth: Add R7S9210 support
2018-08-30 1:10 UTC (2+ messages)
[PATCH 1/6] usb: xhci-mtk: resume USB3 roothub first
2018-08-30 1:09 UTC (3+ messages)
[PATCH v5 0/3] of: cache phandle nodes to reduce cost of of_find_node_by_phandle()
2018-08-30 1:05 UTC (4+ messages)
` [PATCH v5 1/3] "
` v4.17 regression: PowerMac G3 won't boot, was "
[PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
2018-08-30 0:30 UTC (4+ messages)
[PATCH 0/3] firmware: qcom: scm: Improve clock handling
2018-08-29 23:15 UTC (3+ messages)
` [PATCH 2/3] firmware: qcom: scm: Refactor "
` [PATCH 3/3] dt-bindings: firmware: scm: Add MSM8998 and SDM845
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).