messages from 2018-08-30 12:08:33 to 2018-08-30 21:55:32 UTC [more...]
[PATCH 1/2] dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandle
2018-08-30 21:55 UTC (5+ messages)
[PATCH 0/6] crypto: vf-crc - Add new driver (and required clk, DTS...)
2018-08-30 21:42 UTC (8+ messages)
` [PATCH 1/6] dt-bindings: crypto: Add Freescale Vybrid CRC
` [PATCH 2/6] clk: imx: vf610: Add CRC clock
` [PATCH 3/6] ARM: dts: vfxxx: Add node for CRC hardware block
` [PATCH 4/6] crypto: testmgr - Add CRC16 test tables
` [PATCH 5/6] crypto - Group Freescale/NXP ARM architecture Kconfig entires together
` [PATCH 6/6] crypto: vf-crc - Add new driver for Freescale Vybrid CRC
[PATCH v5 00/10] hwmon and fsi: Add On-Chip Controller Driver
2018-08-30 21:32 UTC (11+ messages)
` [PATCH v5 01/10] dt-bindings: fsi: Add P9 OCC device documentation
` [PATCH v5 02/10] fsi: Add On-Chip Controller (OCC) driver
` [PATCH v5 03/10] Documentation: hwmon: Add OCC documentation
` [PATCH v5 04/10] dt-bindings: i2c: Add P8 OCC hwmon device documentation
` [PATCH v5 05/10] hwmon: Add On-Chip Controller (OCC) hwmon driver
` [PATCH v5 06/10] hwmon (occ): Add command transport method for P8 and P9
` [PATCH v5 07/10] hwmon (occ): Parse OCC poll response
` [PATCH v5 08/10] hwmon (occ): Add sensor types and versions
` [PATCH v5 09/10] hwmon (occ): Add sensor attributes and register hwmon device
` [PATCH v5 10/10] hwmon (occ): Add sysfs attributes for additional OCC data
[PATCH v4 0/9] hwmon and fsi: Add On-Chip Controller (OCC) driver
2018-08-30 21:29 UTC (4+ messages)
` [PATCH v4 2/9] Documentation: hwmon: Add OCC documentation
[PATCH 1/2] dt-bindings: power: Add Spreadtrum SC2731 charger documentation
2018-08-30 21:27 UTC (5+ messages)
` [PATCH 2/2] power: supply: Add Spreadtrum SC2731 charger support
[PATCH v2 1/4] iio: gyro: add support for fxas21002c
2018-08-30 21:18 UTC (4+ messages)
` [PATCH v2 2/4] iio: gyro: add device tree "
` [PATCH v2 3/4] iio: fxas21002c: add ODR/Scale support
` [PATCH v2 4/4] MAINTAINERS: add entry for fxas21002c gyro driver
[PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
2018-08-30 20:46 UTC (37+ messages)
` [PATCH v3 01/30] mfd: Makefile: Remove build option for MFD:sun4i-gpadc
` [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
` [PATCH v3 03/30] iio: adc: Remove ID table
` [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options
` [PATCH v3 05/30] iio: adc: move SUN4I_GPADC_CHANNEL define to header file
` [PATCH v3 06/30] iio: adc: remove ofnode options
` [PATCH v3 07/30] iio: adc: remove mfd_probe & sunwi_irq_init function
` [PATCH v3 08/30] iio: adc: remove hwmon structure
` [PATCH v3 09/30] iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel
` [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling
` [PATCH v3 11/30] iio: adc: add new compatibles
` [PATCH v3 12/30] mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
` [PATCH v3 13/30] arm: config: Enable SUN4I_GPADC in defconfig
` [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
` [PATCH v3 15/30] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
` [PATCH v3 16/30] iio: adc: sun4i-gpadc-iio: rework: readout temp_data
` [PATCH v3 17/30] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
` [PATCH v3 18/30] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
` [PATCH v3 19/30] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
` [PATCH v3 20/30] iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume
` [PATCH v3 21/30] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
` [PATCH v3 23/30] ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
` [PATCH v3 24/30] ARM: dts: sun8i: h3: add support for the thermal sensor in H3
` [PATCH v3 25/30] ARM: dts: sun8i: h3: add thermal zone to H3
` [PATCH v3 26/30] ARM: dts: sun8i: h3: enable H3 sid controller
` [PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths
` [PATCH v3 28/30] ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T
` [PATCH v3 29/30] ARM: dts: sun8i: a83t: add thermal zone to A83T
` [PATCH v3 22/30] iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor
` [PATCH v3 30/30] ARM: sun8i: a83t: full range OPP tables and CPUfreq
[PATCH 0/7] ARM32/64: DT overlay build support
2018-08-30 20:32 UTC (4+ messages)
[PATCH v4 00/13] ata: ahci_platform: support allwinner R40 AHCI
2018-08-30 20:31 UTC (17+ messages)
` [PATCH v4 01/13] dt-bindings: ata: ahci-platform: fix indentation of target-supply
` [PATCH v4 02/13] ata: ahci_platform: add support for AHCI controller regulator
` [PATCH v4 03/13] dt-bindings: ata: ahci-platform: document ahci-supply
` [PATCH v4 04/13] phy: Add sun4i-a10-phy-sata driver
` [PATCH v4 05/13] dt-bindings: phy: document sun4i-a10-sata-phy
` [PATCH v4 06/13] dt-bindings: ata: update ahci_sunxi bindings
` [PATCH v4 07/13] ata: ahci_sunxi: Bypass PHY init when using the new binding
` [PATCH v4 08/13] ata: ahci_sunxi: add support for r40
` [PATCH v4 10/13] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
` [PATCH v4 11/13] ARM: dts: sun7i: a20: add sata-port/sata-phy nodes
` [PATCH v4 12/13] ARM: dts: sun4i: a10: "
` [PATCH v4 13/13 DONOTMERGE] ata: ahci_sunxi: remove PHY code
` [PATCH v4 09/13] ARM: dts: sun8i: r40: add sata node
[PATCH v3] ARM: dts: pxa: add mioa701 board description
2018-08-30 19:59 UTC
[PATCH] ARM: dts: pxa: add pincontrol helpers
2018-08-30 19:59 UTC
[PATCH] ARM: dts: pxa: change serial node names
2018-08-30 19:52 UTC (2+ messages)
[PATCH v1 0/5] CPUFREQ OPP's and Tegra30 support by tegra20-cpufreq driver
2018-08-30 19:43 UTC (6+ messages)
` [PATCH v1 1/5] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
` [PATCH v1 2/5] cpufreq: tegra20: Support OPP, thermal cooling and Tegra30
` [PATCH v1 3/5] ARM: tegra: Create tegra20-cpufreq device on Tegra30
` [PATCH v1 4/5] ARM: dts: tegra20: Add CPU Operating Performance Points
` [PATCH v1 5/5] ARM: dts: tegra30: "
[PATCH 2/2] dt-bindings: fix document typo
2018-08-30 19:32 UTC (2+ messages)
[PATCH 0/3] of: root #{size,address}-cells clean-ups
2018-08-30 19:05 UTC (4+ messages)
` [PATCH 1/3] of/fdt: Scan the root node properties earlier
` [PATCH 2/3] of/fdt: avoid re-parsing '#{address,size}-cells' in of_fdt_limit_memory
` [PATCH 3/3] of: make default address and size cells sizes private
[PATCH v6 00/10] Add the I3C subsystem
2018-08-30 19:00 UTC (11+ messages)
` [PATCH v6 01/10] i3c: Add core I3C infrastructure
[PATCH] of: Add device_type access helper functions
2018-08-30 18:52 UTC
[PATCH] of: add node name compare helper functions
2018-08-30 18:52 UTC
[PATCH v2 0/2] GPIO: add single-register GPIO via CREG driver
2018-08-30 18:16 UTC (9+ messages)
` [PATCH v2 1/2] GPIO: add single-register gpio via creg driver
` [PATCH v2 2/2] dt-bindings: Document the Synopsys GPIO via CREG bindings
[PATCH v3] dt-bindings: arm: Explicitly mark Samsung Exynos SoC as unstable
2018-08-30 18:02 UTC
[PATCH 0/5] arm64: dts: NXP: add basic dts file for LX2160A SoC
2018-08-30 17:42 UTC (6+ messages)
` [PATCH 3/5] drivers: clk-qoriq: Add clockgen support for lx2160a
[PATCH v2] ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
2018-08-30 17:21 UTC
[PATCH][v2] arm64: dts: remove big-endian filed from IFC controller
2018-08-30 17:09 UTC (2+ messages)
[PATCH v5 5/5] arm64: dts: actions: Add pinctrl node for Actions Semi S700
2018-08-30 17:05 UTC (2+ messages)
[PATCH v2 0/9] of: fix compatible-child-node lookups
2018-08-30 15:51 UTC (3+ messages)
` [PATCH v2 1/9] of: add helper to lookup compatible child node
[PATCH 0/4] media: platform: Add Aspeed Video Engine driver
2018-08-30 15:40 UTC (4+ messages)
` [PATCH 4/4] "
[PATCH 0/3] Add Xilinx AMS Driver
2018-08-30 15:36 UTC (3+ messages)
` [PATCH 2/3] iio: adc: Add Xilinx AMS driver
[RFT 7/8] arm64: dts: r8a77990: Add I2C device nodes
2018-08-30 15:18 UTC (2+ messages)
[PATCH v3 00/38] Tegra SDHCI add support for HS200 and UHS signaling
2018-08-30 15:06 UTC (39+ messages)
` [PATCH v3 01/38] dt-bindings: Add Tegra PMC pad configuration bindings
` [PATCH v3 02/38] dt-bindings: mmc: tegra: Add pad voltage control properties
` [PATCH v3 03/38] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
` [PATCH v3 04/38] dt-bindings: mmc: Add Tegra SDHCI sampling trimmer values
` [PATCH v3 05/38] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
` [PATCH v3 06/38] soc/tegra: pmc: Factor out DPD register bit calculation
` [PATCH v3 07/38] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
` [PATCH v3 08/38] soc/tegra: pmc: Use X macro to generate IO pad tables
` [PATCH v3 09/38] soc/tegra: pmc: Remove public pad voltage APIs
` [PATCH v3 10/38] soc/tegra: pmc: Implement pad configuration via pinctrl
` [PATCH v3 11/38] mmc: tegra: Reconfigure pad voltages during voltage switching
` [PATCH v3 12/38] mmc: tegra: Poll for calibration completion
` [PATCH v3 13/38] mmc: tegra: Set calibration pad voltage reference
` [PATCH v3 14/38] mmc: tegra: Power on the calibration pad
` [PATCH v3 15/38] mmc: tegra: Disable card clock during pad calibration
` [PATCH v3 16/38] mmc: tegra: Program pad autocal offsets from dt
` [PATCH v3 17/38] mmc: tegra: Perform pad calibration after voltage switch
` [PATCH v3 18/38] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
` [PATCH v3 19/38] mmc: tegra: Add a workaround for tap value change glitch
` [PATCH v3 20/38] mmc: tegra: Parse default trim and tap from dt
` [PATCH v3 21/38] mmc: tegra: Configure default tap values
` [PATCH v3 22/38] mmc: tegra: Configure default trim value on reset
` [PATCH v3 23/38] mmc: tegra: Use standard SDHCI tuning on Tegra210 and Tegra186
` [PATCH v3 24/38] mmc: tegra: Remove tegra_sdhci_writew() from tegra210_sdhci_ops
` [PATCH v3 25/38] mmc: tegra: Disable card clock during tuning cmd on Tegra210
` [PATCH v3 26/38] mmc: tegra: Enable UHS and HS200 modes for Tegra210
` [PATCH v3 27/38] mmc: tegra: Enable UHS and HS200 modes for Tegra186
` [PATCH v3 28/38] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
` [PATCH v3 29/38] arm64: dts: Add Tegra186 "
` [PATCH v3 30/38] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
` [PATCH v3 31/38] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
` [PATCH v3 32/38] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
` [PATCH v3 33/38] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
` [PATCH v3 34/38] arm64: dts: tegra210: "
` [PATCH v3 35/38] arm64: dts: tegra210: Add SDHCI tap and trim values
` [PATCH v3 36/38] arm64: dts: tegra186: "
` [PATCH v3 37/38] arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
` [PATCH v3 38/38] arm64: dts: tegra210: "
[PATCH 0/3] Add USB support
2018-08-30 14:50 UTC (11+ messages)
` [PATCH 1/3] arm64: dts: renesas: r8a774a1: Add USB2.0 phy and host(EHCI/OHCI) device nodes
` [PATCH 2/3] arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB "
` [PATCH 3/3] arm64: dts: renesas: r8a774a1: Add USB3.0 "
[PATCH v2] clk: renesas: cpg-mssr: Add R7S9210 support
2018-08-30 14:49 UTC (5+ messages)
[PATCH v16 0/5] iommu/arm-smmu: Add runtime pm/sleep support
2018-08-30 14:45 UTC (6+ messages)
` [PATCH v16 1/5] iommu/arm-smmu: Add pm_runtime/sleep ops
` [PATCH v16 2/5] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device
` [PATCH v16 3/5] iommu/arm-smmu: Add the device_link between masters and smmu
` [PATCH v16 4/5] dt-bindings: arm-smmu: Add bindings for qcom, smmu-v2
` [PATCH v16 5/5] iommu/arm-smmu: Add support for qcom, smmu-v2 variant
[PATCH v2] remoteproc: qcom: Introduce Non-PAS ADSP PIL driver
2018-08-30 14:16 UTC (3+ messages)
[PATCHv8 0/9] Add Intel Stratix10 FPGA manager and service layer
2018-08-30 14:05 UTC (4+ messages)
` [PATCHv8 7/9] defconfig: enable fpga "
[Patch v15 0/5] iommu/arm-smmu: Add runtime pm/sleep support
2018-08-30 13:59 UTC (5+ messages)
` [Patch v15 2/5] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device
[PATCH v2 0/2] add the Amlogic Meson PCIe controller driver
2018-08-30 13:59 UTC (7+ messages)
` [PATCH v2 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
[PATCH] ARM: dts: imx6ull: fix pinmux input_val for uart5 rx pin
2018-08-30 13:46 UTC (3+ messages)
[PATCH 0/2] clocksource: ostm: Add support for RZ/A2
2018-08-30 9:38 UTC (12+ messages)
` [PATCH 1/2] clocksource/drivers/ostm: Delay driver registration
[PATCH v4 1/7] dmaengine: xilinx_dma: commonize DMA copy size calculation
2018-08-30 13:27 UTC (6+ messages)
` [PATCH v4 2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
[PATCH v2 0/2] Add R8A77980/Condor PCIe support
2018-08-30 12:32 UTC (5+ messages)
` [PATCH v3 1/2] arm64: dts: renesas: r8a77980: add "
` [PATCH v3 2/2] arm64: dts: renesas: condor: "
[PATCH] arm64: dts: renesas: r8a774a1: Add CAN nodes
2018-08-30 12:26 UTC (3+ messages)
[PATCH v2 9/9] arm64: dts: renesas: r8a774a1: Add FCPF and FCPV instances
2018-08-30 12:25 UTC (4+ messages)
` [PATCH v3 "
[PATCH 0/9] Add more support for r8a774a1
2018-08-30 12:25 UTC (24+ messages)
` [PATCH 1/9] arm64: dts: renesas: r8a774a1: Add SDHI nodes
` [PATCH 2/9] arm64: dts: renesas: r8a774a1: Add I2C and IIC-DVFS support
` [PATCH 3/9] arm64: dts: renesas: r8a774a1: Add RZ/G2M thermal support
` [PATCH 4/9] arm64: dts: renesas: r8a774a1: Add IPMMU device nodes
` [PATCH 5/9] arm64: dts: renesas: r8a774a1: Add all MSIOF nodes
` [PATCH 6/9] arm64: dts: renesas: r8a774a1: Add Cortex-A53 CPU cores
` [PATCH 7/9] arm64: dts: renesas: r8a774a1: Add PWM device nodes
` [PATCH 8/9] arm64: dts: renesas: r8a774a1: Add audio support
[PATCH] arm64: dts: renesas: r8a774a1: Add GPIO device nodes
2018-08-30 12:19 UTC (3+ messages)
[PATCH] arm64: dts: renesas: r8a774a1: Add pinctrl device node
2018-08-30 12:17 UTC (3+ messages)
[PATCH 0/5] Add SYS-DMAC/INTC-EX/[H]SCIF/EAVB/RWDT support
2018-08-30 12:16 UTC (18+ messages)
` [PATCH 1/5] arm64: dts: renesas: r8a774a1: Add SYS-DMAC controller nodes
` [PATCH 2/5] arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes
` [PATCH 3/5] arm64: dts: renesas: r8a774a1: Add INTC-EX device node
` [PATCH 4/5] arm64: dts: renesas: r8a774a1: Add Ethernet AVB node
` [PATCH 5/5] arm64: dts: renesas: r8a774a1: Add RWDT node
[PATCH v3 0/4] Add EDAC driver for QCOM SoCs
2018-08-30 12:11 UTC (3+ messages)
` [PATCH v3 3/4] drivers: edac: Add EDAC driver support "
[PATCH 0/6] Document r8a774a1 USB bindings
2018-08-30 12:09 UTC (11+ messages)
` [PATCH 2/6] dt-bindings: rcar-gen3-phy-usb3: Add r8a774a1 support
` [PATCH 3/6] dt-bindings: usb-xhci: "
` [PATCH 4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
` [PATCH 5/6] dt-bindings: usb: renesas_usbhs: Add r8a774a1 support
` [PATCH 6/6] usb: gadget: udc: renesas_usb3: "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).