messages from 2018-10-10 07:46:41 to 2018-10-10 23:17:36 UTC [more...]
[PATCH RFC v2 2/4] dt-bindings: introduce System PM domain bindings for Qualcomm SoCs
2018-10-10 15:54 UTC
[PATCH v4 0/2] Xilinx ZynqMP IPI Mailbox Controller Driver
2018-10-10 22:53 UTC (4+ messages)
` [PATCH v4 2/2] dt-bindings: mailbox: Add Xilinx IPI Mailbox
[PATCH 1/2] dt-bindings: spi: dw: add cs-override property
2018-10-10 22:52 UTC (13+ messages)
` [PATCH 1/2] dt-bindings: spi: dw: add compatible for Alpine spi controller
` [PATCH 2/2] dw: spi: add support "
[PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
2018-10-10 22:20 UTC (6+ messages)
[PATCH v2 0/2] Add R8A77980/Condor PCIe support
2018-10-10 22:11 UTC (9+ messages)
` [PATCH] arm64: dts: renesas: r8a77980: add thermal support
` [PATCH v2] "
[PATCH RFC v1 0/8] drivers: qcom: Add cpu power domain for SDM845
2018-10-10 21:20 UTC (9+ messages)
` [PATCH RFC v1 1/8] PM / Domains: Add helper functions to attach/detach CPUs to/from genpd
` [PATCH RFC v1 2/8] kernel/cpu_pm: Manage runtime PM in the idle path for CPUs
` [PATCH RFC v1 3/8] timer: Export next wakeup time of a CPU
` [PATCH RFC v1 4/8] drivers: qcom: cpu_pd: add cpu power domain support using genpd
` [PATCH RFC v1 5/8] dt-bindings: introduce cpu power domain bindings for Qualcomm SoCs
` [PATCH RFC v1 6/8] drivers: qcom: cpu_pd: program next wakeup to PDC timer
` [PATCH RFC v1 7/8] drivers: qcom: cpu_pd: Handle cpu hotplug in the domain
` [PATCH RFC v1 8/8] arm64: dtsi: sdm845: Add cpu power domain support
[PATCH 05/16] of: overlay: use prop add changeset entry for property in new nodes
2018-10-10 21:03 UTC (5+ messages)
` [PATCH 05.1/16] of:overlay: missing name, phandle, linux,phandle "
[GIT PULL] Devicetree fix for 4.19-rc8
2018-10-10 20:34 UTC (2+ messages)
[PATCH 0/6] Tracing register accesses with pstore and dynamic debug
2018-10-10 19:37 UTC (9+ messages)
` [PATCH 3/6] tracing: Add tp_pstore cmdline to have tracepoints go to pstore
[PATCH 0/15] Add support for OLPC XO 1.75 Embedded Controller
2018-10-10 19:26 UTC (17+ messages)
` [PATCH 01/15] power: supply: olpc_battery: correct the temperature units
` [PATCH 02/15] Revert "platform/olpc: Make ec explicitly non-modular"
` [PATCH 03/15] dt-bindings: olpc,xo1.75-ec: Add OLPC XO-1.75 EC bindings
` [PATCH 04/15] Platform: OLPC: Remove an unused include
` [PATCH 05/15] Platform: OLPC: Move OLPC config symbol out of x86 tree
` [PATCH 06/15] Platform: OLPC: Add XO-1.75 EC driver
` [PATCH 07/15] Platform: OLPC: Avoid a warning if the EC didn't register yet
` [PATCH 08/15] Platform: OLPC: Move EC-specific functionality out from x86
` [PATCH 09/15] Platform: OLPC: add a regulator for the DCON
` [PATCH 10/15] dt-bindings: olpc_battery: Add XO-1.5 battery
` [PATCH 11/15] x86, olpc: Use a correct version when making up a battery node
` [PATCH 12/15] power: supply: olpc_battery: Use DT to get battery version
` [PATCH 13/15] power: supply: olpc_battery: Move priv data to a struct
` [PATCH 14/15] power: supply: olpc_battery: Avoid using platform_info
` [PATCH 15/15] power: supply: olpc_battery: Add OLPC XO 1.75 support
[PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
2018-10-10 19:05 UTC (5+ messages)
` [PATCH v3 2/2] treewide: use bus_find_device_by_fwnode
[Question] directory for SoC-related DT binding
2018-10-10 18:59 UTC (8+ messages)
[PATCH 00/36] Devicetree schema
2018-10-10 18:51 UTC (8+ messages)
` [PATCH 13/36] dt-bindings: arm: Convert PMU binding to json-schema
` [PATCH 32/36] dt-bindings: arm: Convert ST STi board/soc bindings "
[PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power domain driver
2018-10-10 18:41 UTC (2+ messages)
[PATCH v4 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver
2018-10-10 18:40 UTC (2+ messages)
[PATCH 0/2] Add R8A77980 support to the Renesas R-Car gen3 thermal driver
2018-10-10 10:23 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
[PATCH 0/5] Make SPI work on DT MMP2
2018-10-10 17:26 UTC (4+ messages)
` [PATCH 3/5] spi: pxa2xx: use an enum for type
[PATCH v2 0/8] OLPC 1.75 Keyboard/Touchpad fixes
2018-10-10 17:18 UTC (13+ messages)
` [PATCH v2 1/8] dt-bindings: olpc,ap-sp: add clock
` [PATCH v2 2/8] dt-bindings: olpc,ap-sp: add GPIO lines
` [PATCH v2 3/8] dt-bindings: marvell,mmp2: Add clock id for the SP clock
` [PATCH v2 4/8] clk: mmp2: add "
` [PATCH v2 5/8] Input: olpc_apsp: depend on CONFIG_OF
` [PATCH v2 6/8] Input: olpc_apsp: check FIFO status on open(), not probe()
` [PATCH v2 7/8] Input: olpc_apsp: enable the SP clock
` [PATCH v2 8/8] Input: olpc_apsp: allocate the GPIOs used
[PATCH 0/11] spi: pxa2xx: add DT and slave mode support
2018-10-10 17:09 UTC (12+ messages)
` [PATCH v2 01/11] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
` [PATCH v2 02/11] PCI: Provide pci_match_id() with CONFIG_PCI=n
` [PATCH 03/11] spi: pxa2xx: Use an enum for type
` [PATCH 04/11] spi: pxa2xx: Add devicetree support
` [PATCH 05/11] DT: marvell,mmp2: Add SSP1 and SSP3
` [PATCH 06/11] dt-bindings: spi/spi-pxa2xx: Add spi-slave property
` [PATCH 07/11] spi: Deal with slaves that return from transfer_one() unfinished
` [PATCH 08/11] spi: pxa2xx: Add slave mode support
` [PATCH 09/11] dt-bindings: spi/spi-pxa2xx: Add ready GPIO signal
` [PATCH 10/11] spi: pxa2xx: Add ready signal
` [PATCH 11/11] spi: pxa2xx: Deal with the leftover garbage in TXFIFO
[PATCH] dt-bindings: Add OLPC vendor prefix
2018-10-10 16:38 UTC
[PATCH i2c-next v7 0/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
2018-10-10 15:35 UTC (10+ messages)
` [PATCH i2c-next v7 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
` [PATCH i2c-next v7 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
` [PATCH i2c-next v7 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
[PATCH 0/9] Add interconnect support + bindings for A630 GPU
2018-10-10 15:10 UTC (13+ messages)
` [PATCH 5/9] arm64: dts: sdm845: Add gpu and gmu device nodes
` [PATCH 6/9] PM / OPP: dt-bindings: Add opp-interconnect-bw
[PATCH v3 0/3] mmc: tmio_mmc: Add support for RZ/A2
2018-10-10 15:06 UTC (4+ messages)
` [PATCH v3 1/3] clk: renesas: r7s9210: Add SDHI clocks
` [PATCH v3 2/3] mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
` [PATCH v3 3/3] dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210
[PATCH v9 05/11] of: base: Add of_get_cpu_state_node() to get idle states for a CPU node
2018-10-10 15:03 UTC (2+ messages)
[PATCH v9 0/8] Introduce on-chip interconnect API
2018-10-10 15:02 UTC (11+ messages)
` [PATCH v9 2/8] dt-bindings: Introduce interconnect binding
[PATCH v2 0/3] mmc: tmio_mmc: Add support for RZ/A2
2018-10-10 14:59 UTC (6+ messages)
` [PATCH v2 1/3] clk: renesas: r7s9210: Add SDHI clocks
` [PATCH v2 2/3] mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
` [PATCH v2 3/3] dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210
[PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface
2018-10-10 14:59 UTC (7+ messages)
` [PATCH 2/4] drm/panel: simple: Add support for the Lemaker BL035 3.5" LCD
` [PATCH 3/4] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins
` [PATCH NOT FOR MERGE 4/4] ARM: dts: sun7i-a20-bananapi: Add bindings for the BL035 3.5" LCD
[PATCH 0/6] Add non PAS wcss Q6 support for QCS404
2018-10-10 7:33 UTC (4+ messages)
` [PATCH 2/6] clk: qcom: Add WCSS gcc clock control "
[PATCH v2 0/2] clk: qcom: Add support for QCS404
2018-10-10 14:51 UTC (3+ messages)
` [PATCH v2 1/2] clk: qcom: Export clk_alpha_pll_configure()
` [PATCH v2 2/2] clk: qcom: gcc: Add global clock controller driver for QCS404
[PATCH v3] Neutis N5 support
2018-10-10 14:49 UTC (3+ messages)
` [PATCH v3] arm64: new board - Emlid Neutis N5
[RFC 0/4] GPIO & PWM support for HiFive Unleashed
2018-10-10 14:13 UTC (13+ messages)
` [RFC 1/4] pwm: sifive: Add DT documentation for SiFive PWM Controller
` [RFC 2/4] pwm: sifive: Add a driver for SiFive SoC PWM
` [RFC 4/4] gpio: sifive: Add GPIO driver for SiFive SoCs
[RCF PATCH v2 0/2] pwm: imx: Configure output to GPIO in disabled state
2018-10-10 13:39 UTC (4+ messages)
` [RCF PATCH v2 1/2] dt-bindings: pwm: imx: Allow switching PWM output between PWM and GPIO
` [RCF PATCH v2 2/2] pwm: imx: Configure output to GPIO in disabled state
re-licensing of bindings/chosen.txt
2018-10-10 12:30 UTC (3+ messages)
[PATCH v3 00/22] SMMU enablement for NXP LS1043A and LS1046A
2018-10-10 12:07 UTC (20+ messages)
` [PATCH v3 01/22] soc/fsl/qman: fixup liodns only on ppc targets
` [PATCH v3 02/22] soc/fsl/bman: map FBPR area in the iommu
` [PATCH v3 03/22] soc/fsl/qman: map FQD and PFDR areas "
` [PATCH v3 04/22] soc/fsl/qman-portal: map CENA area "
` [PATCH v3 08/22] soc/fsl/qbman_portals: add APIs to retrieve the probing status
` [PATCH v3 09/22] fsl/fman: backup and restore ICID registers
` [PATCH v3 10/22] fsl/fman: add API to get the device behind a fman port
` [PATCH v3 11/22] dpaa_eth: defer probing after qbman
` [PATCH v3 12/22] dpaa_eth: base dma mappings on the fman rx port
` [PATCH v3 13/22] dpaa_eth: fix iova handling for contiguous frames
` [PATCH v3 14/22] dpaa_eth: fix iova handling for sg frames
` [PATCH v3 15/22] dpaa_eth: fix SG frame cleanup
` [PATCH v3 16/22] arm64: dts: ls1046a: add smmu node
` [PATCH v3 17/22] arm64: dts: ls1043a: "
` [PATCH v3 18/22] arm64: dts: ls104xa: set mask to drop TBU ID from StreamID
` [PATCH v3 19/22] arm64: dts: ls104x: add missing dma ranges property
` [PATCH v3 20/22] arm64: dts: ls104x: add iommu-map to pci controllers
` [PATCH v3 21/22] arm64: dts: ls104x: make dma-coherent global to the SoC
` [PATCH v3 22/22] arm64: dts: ls104x: use a pseudo-bus to constrain usb dma size
[PATCH v3 0/3] Enable ath10k wcn3990 wifi driver support on sdm845
2018-10-10 11:52 UTC (4+ messages)
` [PATCH v3 1/3] dt: bindings: add missing dt properties for WCN3990 wifi node
` [PATCH v3 2/3] dts: arm64/sdm845: Add WCN3990 WLAN module device node
` [PATCH v3 3/3] dt: bindings: add bindings for wifi iommu node
[PATCH RFC] gpio: new driver for a gpio simulator
2018-10-10 11:47 UTC (4+ messages)
[PATCH 0/3] mmc: tmio_mmc: Add support for RZ/A2
2018-10-10 10:59 UTC (8+ messages)
` [PATCH 1/3] clk: renesas: r7s9210: Add SDHI clocks
` [PATCH 2/3] mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
` [PATCH 3/3] dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210
[PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
2018-10-10 10:38 UTC
[PATCH] ARM: dts: r8a77470: Add I2C[0123] support
2018-10-10 9:25 UTC (3+ messages)
[PATCH v2 0/3] Use interconnect API in MDSS on SDM845
2018-10-10 9:24 UTC (4+ messages)
` [PATCH v2 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling
` [PATCH v2 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
` [PATCH v2 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
[PATCH 0/7] mfd/pinctrl: add initial support of TI DS90Ux9xx ICs
2018-10-10 9:04 UTC (7+ messages)
` [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description "
` [PATCH 3/7] dt-bindings: pinctrl: ds90ux9xx: add description of TI DS90Ux9xx pinmux
` [PATCH 6/7] pinctrl: ds90ux9xx: add TI DS90Ux9xx pinmux and GPIO controller driver
[PATCH 0/7] Enable spi dma on Rockchip RK3399
2018-10-10 9:00 UTC (8+ messages)
` [PATCH 1/7] spi: rockchip: initialize dma_slave_config properly
` [PATCH 2/7] spi: rockchip: adjust dma watermark and burstlen
` [PATCH 3/7] arm64: dts: rockchip: add rk3399 SPI DMAs
` [PATCH 4/7] spi: rockchip: remove unneeded dma_caps
` [PATCH 5/7] spi: rockchip: mark use_dma as bool
` [PATCH 6/7] spi: rockchip: directly use direction constants
` [PATCH 7/7] spi: rockchip: simplify spi enable logic
[PATCH v3 0/5] Wakeup GPIO support for SDM845
2018-10-10 8:58 UTC (5+ messages)
` [PATCH v3 1/5] drivers: pinctrl: qcom: add wakeup capability to GPIO
[PATCH v10 0/5] Add i.MX8MQ clock driver
2018-10-10 7:50 UTC (5+ messages)
` [PATCH v10 4/5] clk: imx: add imx composite clock
[PATCH 0/6] Standardize onboard LED support for 96Boards
2018-10-10 7:46 UTC (6+ messages)
` [PATCH 6/6] arm64: dts: xilinx: ultra96: Standardize LED labels and triggers
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).