messages from 2019-06-25 12:41:24 to 2019-06-26 13:00:07 UTC [more...]
[PATCH v5 0/7] drm/panel: simple: Add mode support to devicetree
2019-06-26 13:00 UTC (2+ messages)
[PATCH] dt-bindings: display: Add ETM0700G0DH6 compatible string
2019-06-26 12:48 UTC (3+ messages)
[PATCH] arm64: dts: imx8mm: Init rates and parents configs for clocks
2019-06-26 12:45 UTC (2+ messages)
[PATCH v4 1/3] dt-bindings: display: Add Sharp LS020B1DD01D panel documentation
2019-06-26 12:43 UTC (2+ messages)
[PATCH v2 1/2] dt-bindings: display: Add King Display KD035G6-54NT panel documentation
2019-06-26 12:42 UTC (2+ messages)
[PATCH v2 0/4] drm/panel: jh057n0090: Add regulators and drop magic value in init
2019-06-26 12:41 UTC (6+ messages)
` [PATCH v2 1/4] MAINTAINERS: Add Purism mail alias as reviewer for their devkit's panel
` [PATCH v2 2/4] drm/panel: jh057n00900: Don't use magic constant
` [PATCH v2 3/4] dt-bindings: display/panel: jh057n00900: Document power supply properties
` [PATCH v2 4/4] drm/panel: jh057n00900: Add regulator support
[PATCH v6 0/2] Add DSI panel driver for Raydium RM67191
2019-06-26 12:41 UTC (4+ messages)
` [PATCH v6 1/2] dt-bindings: display: panel: Add support for Raydium RM67191 panel
` [PATCH v6 2/2] drm/panel: Add support for Raydium RM67191 panel driver
[PATCH v3 0/5] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b
2019-06-26 12:40 UTC (15+ messages)
` [PATCH v3 1/5] drm/panel: simple: Add Sharp LQ070Y3DG3B panel support
` [PATCH v3 2/5] drm/panel: simple: Add Ortustech COM37H3M "
` [PATCH v3 3/5] dt-bindings: drm/panel: simple: add ortustech,com37h3m05dtc panel
` [PATCH v3 3/5] dt-bindings: drm/panel: simple: add ortustech, com37h3m05dtc panel
` [PATCH v3 4/5] dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel
` [PATCH v3 4/5] dt-bindings: drm/panel: simple: add ortustech, com37h3m99dtc panel
` [PATCH v3 5/5] dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel
` [PATCH v3 5/5] dt-bindings: drm/panel: simple: add sharp, lq070y3dg3b panel
[PATCH v10 0/6] support a new type of PMIC,including two chips(rk817 and rk809)
2019-06-26 12:29 UTC (6+ messages)
` [PATCH v10 1/6] mfd: rk808: remove the id_table
` [PATCH v10 3/6] regulator: rk808: add RK809 and RK817 support
` [PATCH v10.1 "
[PATCH v2 0/5] stm32-ddr-pmu driver creation
2019-06-26 12:25 UTC (4+ messages)
` [PATCH v2 3/5] perf: stm32: ddrperfm "
[PATCH v5 0/2] Add DSI panel driver for Raydium RM67191
2019-06-26 12:13 UTC (7+ messages)
` [PATCH v5 1/2] dt-bindings: display: panel: Add support for Raydium RM67191 panel
` [PATCH v5 2/2] drm/panel: Add support for Raydium RM67191 panel driver
` [EXT] "
[PATCH] arm64: dts: sdm845: Add video nodes
2019-06-26 11:54 UTC
[PATCH 0/2] fix vendor prefix for arcxcnn driver and bindings
2019-06-26 11:45 UTC (10+ messages)
` [PATCH 1/2] dt-bindings: backlight: fix vendor prefix for ArcticSand arcxcnn driver bindings
` [PATCH 2/2] backlight: arcxcnn: add "arctic" vendor prefix
[PATCHv2 1/2] PCI: layerscape: Add the bar_fixed_64bit property in EP driver
2019-06-26 11:11 UTC (2+ messages)
` [PATCHv2 2/2] PCI: layerscape: EP and RC drivers are compiled separately
[PATCH 0/4] drm/panel: jh057n0090: Add regulators and drop magic value in init
2019-06-26 10:40 UTC (9+ messages)
` [PATCH 1/4] MAINTAINERS: Add Purism mail alias as reviewer for their devkit's panel
` [PATCH 2/4] drm/panel: jh057n0090: Don't use magic constant
` [PATCH 3/4] dt-bindings: display/panel: jh057n0090: Document power supply properties
` [PATCH 4/4] drm/panel: jh057n0090: Add regulator support
[PATCH RESEND V2 1/3] clocksource/drivers/sysctr: Add optional clock-frequency property
2019-06-26 10:37 UTC (4+ messages)
[PATCH V4 00/18] SC7 entry and exit support for Tegra210
2019-06-26 10:28 UTC (16+ messages)
` [PATCH V4 02/18] pinctrl: tegra: add suspend and resume support
` [PATCH V4 03/18] gpio: tegra: use resume_noirq for tegra gpio resume
` [PATCH V4 10/18] clk: tegra: add save and restore context support for peripheral clocks
` [PATCH V4 11/18] clk: tegra210: use fence_udelay during PLLU init
` [PATCH V4 12/18] clk: tegra210: support for Tegra210 clocks suspend and resume
` [PATCH V4 14/18] soc/tegra: pmc: add pmc wake support for tegra210
` [PATCH V4 18/18] arm64: dts: tegra210-p2180: Jetson TX1 SC7 timings
[bug report] scripts/dtc: Update to upstream version v1.5.0-23-g87963ee20693
2019-06-26 10:07 UTC
[RFC PATCH v4 net-next 00/11] net: ethernet: ti: introduce new cpsw switchdev based driver
2019-06-26 9:58 UTC (5+ messages)
` [RFC PATCH v4 net-next 06/11] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
` [RFC PATCH v4 net-next 10/11] ARM: dts: am57xx-idk: add dt nodes for new cpsw switch dev driver
[PATCH 0/3] media: suppport ov02a10 sensor driver
2019-06-26 9:58 UTC (5+ messages)
` [PATCH 1/3] media: i2c: ov02a10: Add ov02a10 camera "
regression: nand/spi flashes listed in reversed order after "ARM: dts: at91: Switch to the new NAND bindings"
2019-06-26 9:36 UTC
[PATCH v3 00/14] Support CPU frequency scaling on QCS404
2019-06-26 9:10 UTC (17+ messages)
` [PATCH v3 01/14] clk: qcom: gcc: limit GPLL0_AO_OUT operating frequency
` [PATCH v3 02/14] mbox: qcom: add APCS child device for QCS404
` [PATCH v3 03/14] mbox: qcom: replace integer with valid macro
` [PATCH v3 04/14] dt-bindings: mailbox: qcom: Add clock-name optional property
` [PATCH v3 05/14] clk: qcom: apcs-msm8916: get parent clock names from DT
` [PATCH v3 06/14] clk: qcom: hfpll: "
` [PATCH v3 07/14] clk: qcom: hfpll: register as clock provider
` [PATCH v3 08/14] clk: qcom: hfpll: CLK_IGNORE_UNUSED
` [PATCH v3 09/14] arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
` [PATCH v3 10/14] arm64: dts: qcom: qcs404: Add OPP table
` [PATCH v3 11/14] arm64: dts: qcom: qcs404: Add HFPLL node
` [PATCH v3 12/14] arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
` [PATCH v3 13/14] arm64: dts: qcom: qcs404: Add DVFS support
` [PATCH v3 14/14] arm64: defconfig: Enable HFPLL
[PATCH v4 0/5] Exynos Performance Monitoring Counters enhancements
2019-06-26 8:23 UTC (5+ messages)
` [PATCH v4 2/5] drivers: devfreq: events: change matching code during probe
` [PATCH v4 4/5] Documentation: devicetree: add PPMU events description
[PATCH v5 00/18] kunit: introduce KUnit, the Linux kernel unit testing framework
2019-06-26 8:02 UTC (28+ messages)
` [PATCH v5 01/18] kunit: test: add KUnit test runner core
` [PATCH v5 06/18] kbuild: enable building KUnit
` [PATCH v5 07/18] kunit: test: add initial tests
` [PATCH v5 13/18] kunit: tool: add Python wrappers for running KUnit tests
` [PATCH v5 17/18] kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
` [PATCH v5 18/18] MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
[PATCH 0/8] pinctrl: aspeed: Preparation for AST2600
2019-06-26 7:54 UTC (10+ messages)
` [PATCH 1/8] dt-bindings: pinctrl: aspeed: Split bindings document in two
` [PATCH 2/8] dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
` [PATCH 3/8] dt-bindings: pinctrl: aspeed: Convert AST2500 "
` [PATCH 4/8] MAINTAINERS: Add entry for ASPEED pinctrl drivers
` [PATCH 5/8] pinctrl: aspeed: Correct comment that is no longer true
` [PATCH 6/8] pinctrl: aspeed: Clarify comment about strapping W1C
` [PATCH 7/8] pinctrl: aspeed: Split out pinmux from general pinctrl
` [PATCH 8/8] pinctrl: aspeed: Add implementation-related documentation
[v3 0/4] Add drivers for auo, kd101n80-45na and boe, tv101wum-nl6 panels
2019-06-26 7:26 UTC (8+ messages)
` [v3 1/4] dt-bindngs: display: panel: Add BOE tv101wum-n16 panel bindings
` [v3 2/4] drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel
` [v3 3/4] dt-bindings: display: panel: add auo kd101n80-45na panel bindings
` [v3 4/4] drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel
[PATCH 0/4] Add MFD/Regulator support for ATC260x PMICs
2019-06-26 6:56 UTC (3+ messages)
` [PATCH 2/4] mfd: Add initial MFD driver "
[PATCH v3 0/4] Qcom smmu-500 wait-for-safe handling for sdm845
2019-06-26 6:33 UTC (10+ messages)
` [PATCH v3 3/4] iommu/arm-smmu: Add support to handle Qcom's wait-for-safe logic
[PATCH v8 0/5] MTD: Add Initial Hyperbus support
2019-06-26 6:17 UTC (6+ messages)
` [PATCH v8 1/5] mtd: cfi_cmdset_0002: Add support for polling status register
` [PATCH v8 3/5] mtd: Add support for HyperBus memory devices
[PATCH v7 0/5] MTD: Add Initial HyperBus support
2019-06-26 6:00 UTC (4+ messages)
` [PATCH v7 3/5] mtd: Add support for HyperBus memory devices
[PATCH] ARM: imx25: provide a fixed regulator for usb phys
2019-06-26 5:54 UTC (3+ messages)
[RESEND PATCH v1 0/5] Solve postboot supplier cleanup and optimize probe ordering
2019-06-26 5:49 UTC (5+ messages)
[PATCH v2 0/2] Add MediaTek I3C master controller driver
2019-06-26 5:36 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: i3c: Document MediaTek I3C master bindings
` [PATCH v2 2/2] i3c: master: Add driver for MediaTek IP
[RFC v2 0/4] media: mediatek: support mdp3 on mt8183 platform
2019-06-26 4:41 UTC (5+ messages)
` [RFC v2 4/4] media: platform: mtk-mdp3: Add Mediatek MDP3 driver
[RFC PATCH V1 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC
2019-06-26 4:24 UTC (5+ messages)
` [RFC PATCH V1 6/6] platform: mtk-isp: Add Mediatek DIP driver
[PATCH v3 0/3] Qualcomm UFS device reset support
2019-06-26 3:45 UTC (4+ messages)
` [PATCH v3 1/3] scsi: ufs: Introduce vops for resetting device
[v2 0/2] Add BOE tv101wum-nl6 panel driver
2019-06-26 3:27 UTC (3+ messages)
` [v2 2/2] drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel
[PATCH v3 0/6] qcom: add OCMEM support
2019-06-26 2:21 UTC (7+ messages)
` [PATCH v3 1/6] dt-bindings: soc: qcom: add On Chip MEMory (OCMEM) bindings
` [PATCH v3 4/6] firmware: qcom: scm: add support to restore secure config to qcm_scm-32
` [PATCH v3 2/6] dt-bindings: display: msm: gmu: add optional ocmem property
` [PATCH v3 3/6] firmware: qcom: scm: add OCMEM lock/unlock interface
` [PATCH v3 5/6] soc: qcom: add OCMEM driver
` [PATCH v3 6/6] drm/msm/gpu: add ocmem init/cleanup functions
[PATCH] [PATCH v1] ARM: dts: aspeed: Adding Lenovo Hr855xg2 BMC
2019-06-26 2:05 UTC (4+ messages)
` 答复: [External] "
8e2fc846a9 ("Merge remote-tracking branch 'gpio/for-next'"): BUG: kernel reboot-without-warning in boot stage
2019-06-26 1:33 UTC
[PATCH v13 00/13] Ingenic Timer/Counter Unit patchset v13
2019-06-25 23:28 UTC (8+ messages)
` [PATCH v13 04/13] mfd: Add Ingenic TCU driver
` [PATCH v13 05/13] clk: ingenic: Add driver for the TCU clocks
[PATCH v1 0/2] char: tpm: add new driver for tpm i2c ptp
2019-06-25 22:35 UTC (3+ messages)
` [PATCH v1 1/2] dt-bindings: tpm: add the TPM I2C PTP device tree binding documentation
` [PATCH v1 2/2] char: tpm: add new driver for tpm i2c ptp
[PATCH V3 1/4] dt-bindings: imx: Add clock binding doc for i.MX8MN
2019-06-25 22:34 UTC (9+ messages)
` [PATCH V3 3/4] clk: imx: Add support for i.MX8MN clock driver
[PATCH 1/2] ARM: dts: rockchip: move rk3288-veryon display settings into a separate file
2019-06-25 22:26 UTC (2+ messages)
` [PATCH 2/2] ARM: dts: rockchip: consolidate veyron panel and backlight settings
[PATCH 0/2] Allow VINDPM to be set in the device tree
2019-06-25 22:13 UTC (4+ messages)
` [PATCH 2/2] dt-bindings: power: supply: Add documentation for the VINDPM properties
[PATCH v2 00/15] Conversion of panel bindings to DT schema
2019-06-25 21:47 UTC (10+ messages)
` [PATCH v2 06/15] dt-bindings: display: Convert dlc,dlc0700yzg-1 panel "
` [PATCH v2 10/15] dt-bindings: display: Convert tpo,tpg110 "
drm/msm/dpu: Correct dpu encoder spinlock initialization
2019-06-25 21:40 UTC (4+ messages)
[PATCH v2 0/4] Add support for Marvell 98DX1135
2019-06-25 21:35 UTC (8+ messages)
` [PATCH v2 2/4] dt-bindings: clock: mvebu: Add compatible string for 98dx1135 core clock
` [PATCH v2 3/4] pinctrl: mvebu: Add support for MV98DX1135
` [PATCH v2 4/4] clk: kirkwood: "
[PATCH V3 00/17] SC7 entry and exit support for Tegra210
2019-06-25 21:22 UTC (4+ messages)
` [PATCH V3 06/17] clk: tegra: pll: save and restore pll context
[PATCH v5 0/6] add edma2 for i.mx7ulp
2019-06-25 20:56 UTC (2+ messages)
[PATCH v5 1/3] dt-bindings: display: Add GiantPlus GPM940B0 panel documentation
2019-06-25 20:19 UTC (3+ messages)
` [PATCH v5 3/3] drm/panel: simple: Add GiantPlus GPM940B0 panel support
[PATCH] arm64: dts: qcom: sdm845-cheza: add initial cheza dt
2019-06-25 18:58 UTC (2+ messages)
[PATCH v3 0/9] Support for Allwinner V3/S3L and Sochip S3
2019-06-25 17:39 UTC (8+ messages)
` [PATCH v3 1/9] pinctrl: sunxi: v3s: introduce support for V3
` [PATCH v3 5/9] dt-bindings: vendor-prefixes: add SoChip
[PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI
2019-06-25 15:30 UTC (12+ messages)
[v4 2/2] dt-bindings: mtd: Add Cadence NAND controller driver
2019-06-25 15:22 UTC
[PATCH v4 0/5] Add QCS404 interconnect provider driver
2019-06-25 15:00 UTC (3+ messages)
` [PATCH v4 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
[PATCH v3 0/5] Introduce customized regulators coupling
2019-06-25 14:40 UTC (4+ messages)
` [PATCH v3 2/5] regulator: core: Expose some of core functions needed by couplers
[PATCH V2 0/2] mailbox: arm: introduce smc triggered mailbox
2019-06-25 14:36 UTC (5+ messages)
` [PATCH V2 2/2] mailbox: introduce ARM SMC based mailbox
[PATCH v2 00/17] net: introduce Qualcomm IPA driver
2019-06-25 14:34 UTC (4+ messages)
` WWAN Controller Framework (was IPA [PATCH v2 00/17])
[PATCH] arm64: dts: imx8mq: Init rates and parents configs for clocks
2019-06-25 14:22 UTC (2+ messages)
[PATCH v2 00/17] net: introduce Qualcomm IPA driver
2019-06-25 14:19 UTC (20+ messages)
[PATCH v4 0/2] Add DSI panel driver for Raydium RM67191
2019-06-25 14:06 UTC (3+ messages)
` [PATCH v4 2/2] drm/panel: Add support for Raydium RM67191 panel driver
[PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
2019-06-25 13:13 UTC (4+ messages)
` [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
` [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
` [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).