messages from 2020-05-23 10:36:15 to 2020-05-25 10:21:09 UTC [more...]
[PATCH 0/8] R8A7742 add support for HSUSB and USB2.0/3.0
2020-05-25 10:20 UTC (16+ messages)
` [PATCH 1/8] dt-bindings: phy: rcar-gen2: Add r8a7742 support
` [PATCH 2/8] dt-bindings: PCI: pci-rcar-gen2: Add device tree support for r8a7742
` [PATCH 3/8] dt-bindings: usb: renesas,usbhs: Add "
` [PATCH 4/8] dt-bindings: dmaengine: renesas,usb-dmac: Add binding "
` [PATCH 5/8] dt-bindings: usb: usb-xhci: Document r8a7742 support
` [PATCH 6/8] ARM: dts: r8a7742: Add USB 2.0 host support
` [PATCH 7/8] ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes
` [PATCH 8/8] ARM: dts: r8a7742: Add xhci support
[PATCH v3 00/16] Add support for Kontron sl28cpld
2020-05-25 10:20 UTC (6+ messages)
` [PATCH v3 10/16] gpio: add a reusable generic gpio_chip using regmap
[PATCH v6 0/5] Loongson PCI Generic Driver
2020-05-25 10:12 UTC (4+ messages)
` [PATCH v4 1/6] irqchip: Add Loongson HyperTransport Vector support
` [PATCH v4 2/6] dt-bindings: interrupt-controller: Add Loongson HTVEC
[PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
2020-05-25 10:09 UTC (10+ messages)
` [PATCH 1/6] arm64: dts: qcom: sm8150: add apps_smmu node
` [PATCH 2/6] arm64: dts: qcom: sm8250: "
` [PATCH 3/6] arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
` [PATCH 4/6] arm64: dts: qcom: sm8250: Add USB and PHY device nodes
` [PATCH 5/6] arm64: dts: qcom: add sm8150 hdk dts
` [PATCH 6/6] arm64: dts: qcom: add sm8250 "
[PATCH] arm: dts: am33xx-bone-common: add gpio-line-names
2020-05-25 9:23 UTC (5+ messages)
[PATCH] dt-bindings: gpio: Add renesas,em-gio bindings
2020-05-25 9:14 UTC (2+ messages)
[PATCH v3 0/8] dwmac-meson8b Ethernet RX delay configuration
2020-05-25 9:07 UTC (5+ messages)
` [PATCH v3 1/8] dt-bindings: net: meson-dwmac: Add the amlogic,rx-delay-ns property
[PATCH 0/3] pinctrl: Adding support for Microchip serial GPIO controller
2020-05-25 8:50 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: pinctrl: Add bindings for mscc,ocelot-sgpio
[PATCH 1/2] arm64: dts: Add a device tree for the Librem5 phone
2020-05-25 8:47 UTC (2+ messages)
[PATCH 0/3] iio: magnetometer: ak8975: Add gpio reset support
2020-05-25 8:43 UTC (3+ messages)
` [PATCH 2/3] dt-bindings: iio: magnetometer: ak8975: add "
[PATCH v5 00/13] support gce on mt6779 platform
2020-05-25 8:39 UTC (27+ messages)
` [PATCH v5 06/13] soc: mediatek: cmdq: add assign function
` [PATCH v5 07/13] soc: mediatek: cmdq: add write_s function
` [PATCH v5 09/13] soc: mediatek: cmdq: add write_s value function
` [PATCH v5 10/13] soc: mediatek: cmdq: export finalize function
` [PATCH v5 12/13] soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
` [PATCH v5 13/13] soc: mediatek: cmdq: add set event function
[PATCH 0/4] Allwinner A100 Initial support
2020-05-22 15:31 UTC (5+ messages)
` [PATCH 2/4] pinctrl: sunxi: add support for the Allwinner A100 pin controller
` [PATCH 4/4] arm64: allwinner: A100: add support for Allwinner Perf1 board
[PATCH v3] arm64: dts: qcom: apq8016-sbc-d3: Add Qualcomm APQ8016 SBC + D3Camera mezzanine
2020-05-25 8:35 UTC (4+ messages)
[PATCH 00/17] RZ/G1H describe I2C, IIC, MMC0, SATA, AVB, RWDT and APMU nodes
2020-05-25 8:23 UTC (9+ messages)
` [PATCH 03/17] ARM: dts: r8a7742: Add I2C and IIC support
[PATCH v5 0/4] iio: magnetometer: ak8975: Add gpio reset support
2020-05-25 8:00 UTC (6+ messages)
` [PATCH v5 1/4] dt-bindings: iio: magnetometer: ak8975: convert format to yaml, add maintainer
` [PATCH v5 4/4] iio: magnetometer: ak8975: Add gpio reset support
[PATCH] arm64: dts: ls1028a: add one more thermal zone support
2020-05-25 7:38 UTC
[PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
2020-05-25 7:44 UTC (3+ messages)
[PATCH v2 0/6] Convert adi,adv7511.txt DT bindings to yaml
2020-05-25 7:43 UTC (6+ messages)
` [PATCH v2 6/6] dt-bindings: drm: bridge: adi,adv7511.txt: convert "
[PATCH v3 0/5] iio: imu: bmi160: added regulator and mount-matrix support
2020-05-25 7:27 UTC (6+ messages)
` [PATCH v3 1/5] dt-bindings: iio: imu: bmi160: convert txt format to yaml
` [PATCH v3 5/5] iio: imu: bmi160: added mount-matrix support
[PATCH net v2 0/4] net: ethernet: fec: move GPR reigster offset and bit into DT
2020-05-25 7:09 UTC (5+ messages)
` [PATCH net v2 1/4] net: ethernet: fec: move GPR register "
` [PATCH net v2 2/4] dt-bindings: fec: update the gpr property
` [PATCH net v2 3/4] ARM: dts: imx: add ethernet stop mode property
` [PATCH net v2 4/4] ARM: dts: imx6qdl-sabresd: enable fec wake-on-lan
[PATCH v3 00/07] MT6779 IOMMU SUPPORT
2020-05-25 6:54 UTC (11+ messages)
` [PATCH v3 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL
` [PATCH v3 3/7] iommu/mediatek: Disable STANDARD_AXI_MODE in MISC_CTRL
` [PATCH v3 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
` [PATCH v3 5/7] iommu/mediatek: Add sub_comm id in translation fault
` [PATCH v3 7/7] iommu/mediatek: Add mt6779 basic support
[PATCH 0/3] usb: dwc3: keystone: Convert binding to YAML
2020-05-25 6:41 UTC (7+ messages)
` [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
[PATCH V1 0/3] Internal voltage control for qcom SDHC
2020-05-25 5:42 UTC (4+ messages)
` [PATCH V2 "
` [PATCH V2 3/3] mmc: sdhci: Allow platform controlled voltage switching
[PATCH v2 0/9] sunxi: Support IRQ wakeup from deep sleep
2020-05-25 4:13 UTC (10+ messages)
` [PATCH v2 1/9] irqchip/sun6i-r: Use a stacked irqchip driver
` [PATCH v2 2/9] irqchip/sun6i-r: Add wakeup support
` [PATCH v2 3/9] dt-bindings: irq: Add a compatible for the H3 R_INTC
` [PATCH v2 4/9] ARM: dts: sunxi: h3/h5: Add r_intc node
` [PATCH v2 5/9] ARM: dts: sunxi: h3/h5: Move wakeup-capable IRQs to r_intc
` [PATCH v2 6/9] ARM: dts: sunxi: a83t: "
` [PATCH v2 7/9] arm64: dts: allwinner: a64: "
` [PATCH v2 8/9] arm64: dts: allwinner: h6: Fix indentation of IR node
` [PATCH v2 9/9] arm64: dts: allwinner: h6: Move wakeup-capable IRQs to r_intc
[PATCH 0/9] sunxi: Support IRQ wakeup from deep sleep
2020-05-25 4:12 UTC (4+ messages)
` [PATCH 1/9] irqchip/sun6i-r: Switch to a stacked irqchip driver
[PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
2020-05-25 3:45 UTC (9+ messages)
` [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
` [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
` [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board
` [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
` [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
` [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
` [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
` [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
[PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
2020-05-25 3:41 UTC (9+ messages)
` [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
` [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
` [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board
` [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
` [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
` [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
` [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
` [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
[PATCH v5 00/14] Add PCIe support to TI's J721E SoC
2020-05-25 3:30 UTC (4+ messages)
` [PATCH v5 03/14] PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses
[PATCH net 0/4] net: ethernet: fec: move GPR reigster offset and bit into DT
2020-05-25 3:16 UTC (16+ messages)
` [PATCH net 1/4] net: ethernet: fec: move GPR register "
` [EXT] "
` [PATCH net 2/4] dt-bindings: fec: update the gpr property
` [EXT] "
` [PATCH net 3/4] ARM: dts: imx6: update fec gpr property to match new format
` [EXT] "
[PATCH v5 0/3] Add Caninos Loucos Labrador CoM and Base Board Device Tree
2020-05-25 1:30 UTC (4+ messages)
` [PATCH v5 1/3] dt-bindings: Add vendor prefix for Caninos Loucos
` [PATCH v5 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador
` [PATCH v5 3/3] ARM: dts: Add "
[PATCH 00/10] Enable GPU for SM8150 and SM8250
2020-05-24 21:06 UTC (5+ messages)
` [PATCH 05/10] dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings
` [PATCH 06/10] dt-bindings: clock: Introduce SM8250 "
` [PATCH 09/10] arm64: dts: qcom: add sm8150 GPU nodes
` [PATCH 10/10] arm64: dts: qcom: add sm8250 "
[V8, 0/2] media: i2c: Add support for OV02A10 sensor
2020-05-24 20:33 UTC (6+ messages)
` [V8, 1/2] media: dt-bindings: media: i2c: Document OV02A10 bindings
[PATCH 0/3] mmc: Adding support for Microchip Sparx5 SoC
2020-05-24 19:26 UTC (6+ messages)
` [PATCH 2/3] sdhci: sparx5: Add Sparx5 SoC eMMC driver
[PATCH v3 00/10] Improvements to IMX290 CMOS driver
2020-05-24 19:25 UTC (11+ messages)
` [PATCH v3 01/10] media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
` [PATCH v3 02/10] media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS()
` [PATCH v3 03/10] media: i2c: imx290: fix reset GPIO pin handling
` [PATCH v3 04/10] media: i2c: imx290: Add support for 2 data lanes
` [PATCH v3 05/10] media: i2c: imx290: Add configurable link frequency and pixel rate
` [PATCH v3 06/10] media: i2c: imx290: Add support for test pattern generation
` [PATCH v3 07/10] media: i2c: imx290: Add RAW12 mode support
` [PATCH v3 08/10] media: i2c: imx290: Add support to enumerate all frame sizes
` [PATCH v3 09/10] media: i2c: imx290: Move the settle time delay out of loop
` [PATCH v3 10/10] media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse()
[PATCH v2 3/4] mtd: rawnand: ingenic: Fix the RB gpio active-high property on qi,lb60
2020-05-24 19:03 UTC (2+ messages)
` [PATCH v2 3/4] mtd: rawnand: ingenic: Fix the RB gpio active-high property on qi, lb60
[PATCH v2 4/4] mtd: rawnand: ingenic: Convert the driver to exec_op()
2020-05-24 19:03 UTC (2+ messages)
[PATCH v5 0/6] Support DRM bridges on NVIDIA Tegra
2020-05-24 18:41 UTC (2+ messages)
[PATCH 1/2] ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
2020-05-24 16:06 UTC (2+ messages)
` [PATCH 2/2] arm64: "
Add support for the X1830 and fix bugs for X1000 v9
2020-05-24 15:47 UTC (8+ messages)
` [PATCH v9 0/6] Add support for the X1830 and fix bugs for X1000
` [PATCH v9 1/6] clk: Ingenic: Remove unnecessary spinlock when reading registers
` [PATCH v9 2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830
` [PATCH v9 3/6] dt-bindings: clock: Add X1830 bindings
` [PATCH v9 4/6] clk: Ingenic: Add CGU driver for X1830
` [PATCH v9 5/6] dt-bindings: clock: Add and reorder ABI for X1000
` [PATCH v9 6/6] clk: X1000: Add FIXDIV for SSI clock of X1000
[PATCH v5 0/5] Microchip TCB Capture driver
2020-05-24 15:35 UTC (4+ messages)
` [PATCH v5 5/5] counter: Add microchip TCB capture counter
[PATCH] dt/platform: Fix comment in of_dev_lookup()
2020-05-24 15:26 UTC
[PATCH v13 2/3] i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
2020-05-24 12:20 UTC (2+ messages)
[PATCH V5 0/5] iio: adc: Add support for QCOM SPMI PMIC7 ADC
2020-05-24 12:04 UTC (5+ messages)
` [PATCH V5 3/5] iio: adc: Add support for "
` [PATCH V5 5/5] iio: adc: Clean up ADC code common to PMIC5 and PMIC7
[PATCH V5 0/8] Add APSS clock controller support for IPQ6018
2020-05-24 10:04 UTC (9+ messages)
` [PATCH V5 1/8] dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
` [PATCH V5 2/8] dt-bindings: clock: add ipq6018 a53 pll compatible
` [PATCH V5 3/8] clk: qcom: Add ipq apss pll driver
` [PATCH V5 4/8] clk: qcom: Add DT bindings for ipq6018 apss clock controller
` [PATCH V5 5/8] clk: qcom: Add "
` [PATCH V5 6/8] dt-bindings: mailbox: Add dt-bindings for ipq6018 apcs global block
` [PATCH V5 7/8] mailbox: qcom: Add ipq6018 apcs compatible
` [PATCH V5 8/8] arm64: dts: ipq6018: Add a53 pll and apcs clock
[PATCH V4 0/8] Add APSS clock controller support for IPQ6018
2020-05-24 9:49 UTC (10+ messages)
` [PATCH V4 2/8] dt-bindings: clock: Add schema for QCOM IPQ apss pll
` [PATCH V4 5/8] clk: qcom: Add ipq apss clock controller
` [PATCH V4 7/8] mailbox: qcom: Add ipq6018 apcs compatible
[PATCH V3 0/8] Add APSS clock controller support for IPQ6018
2020-05-24 9:36 UTC (6+ messages)
` [PATCH V3 3/8] clk: qcom: Add A53 PLL support for ipq6018 devices
[PATCH v13 0/3] i2c: npcm7xx: add NPCM i2c controller driver
2020-05-24 8:35 UTC (5+ messages)
` [PATCH v13 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller
[PATCH v13 0/2] Add support for Xilinx CSI2 Receiver Subsystem
2020-05-24 2:27 UTC (5+ messages)
` [PATCH v13 1/2] media: dt-bindings: media: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem
` [PATCH v13 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem driver
[PATCH v12 0/2] Add support for Xilinx CSI2 Receiver Subsystem
2020-05-24 1:45 UTC (5+ messages)
` [PATCH v12 1/2] media: dt-bindings: media: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem
[PATCH v2 0/5] net: provide a devres variant of register_netdev()
2020-05-23 23:56 UTC (7+ messages)
` [PATCH v2 1/5] Documentation: devres: add a missing section for networking helpers
` [PATCH v2 2/5] net: move devres helpers into a separate source file
` [PATCH v2 3/5] net: devres: define a separate devres structure for devm_alloc_etherdev()
` [PATCH v2 4/5] net: devres: provide devm_register_netdev()
` [PATCH v2 5/5] net: ethernet: mtk_star_emac: use devm_register_netdev()
[PATCH net-next v2 0/4] RGMII Internal delay common property
2020-05-23 22:07 UTC (9+ messages)
` [PATCH net-next v2 1/4] dt-bindings: net: Add tx and rx internal delays
` [PATCH net-next v2 4/4] net: dp83869: Add RGMII internal delay configuration
[PATCH 0/3] Add PWM support for Intel Keem Bay SoC
2020-05-23 21:40 UTC (5+ messages)
` [PATCH 1/3] pwm: Add count attribute in sysfs for Intel Keem Bay
` [PATCH 2/3] pwm: Add PWM driver "
[PATCH] dt-bindings: dma: uart: mtk: fix example
2020-05-23 20:15 UTC
[PATCH V3] arm64: dts: mediatek: add cpufreq and cci devfreq nodes for mt8183
2020-05-23 19:04 UTC
[PATCH V6 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
2020-05-23 14:05 UTC (2+ messages)
[PATCH] arm64: dts: qcom: sm8250: change ufs node name to ufshc
2020-05-23 17:52 UTC
[RFC PATCH net-next 0/4] RGMII Internal delay common property
2020-05-23 14:58 UTC (3+ messages)
` [RFC PATCH net-next 4/4] net: dp83869: Add RGMII internal delay configuration
[PATCH v2 4/5] net: devres: provide devm_register_netdev()
2020-05-23 14:34 UTC
[PATCH] arm64: dts: qcom: sm8250: sort nodes by physical address
2020-05-23 13:22 UTC
[PATCH] arm64: dts: qcom: sm8250: rename spmi node to spmi_bus
2020-05-23 13:21 UTC
[PATCH 0/5] net: provide a devres variant of register_netdev()
2020-05-23 13:14 UTC (3+ messages)
[PATCH v5 00/11] mediatek: add support for MediaTek Ethernet MAC
2020-05-23 13:14 UTC (5+ messages)
[PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks
2020-05-23 13:12 UTC
[PATCH v3 0/6] sc16is7xx: IrDA mode and threaded IRQs
2020-05-23 12:27 UTC (3+ messages)
[PATCH v11 0/6] Add battery charger driver support for MP2629
2020-05-23 12:20 UTC (4+ messages)
` [PATCH v11 2/6] mfd: mp2629: Add support for mps battery charger
[PATCH v4 0/6] allow ramoops to collect all kmesg_dump events
2020-05-23 11:16 UTC (3+ messages)
` [PATCH v4 1/6] printk: Collapse shutdown types into a single dump reason
[PATCH 0/4] stm32-f7: Addition of SMBus Alert / Host-notify features
2020-05-23 11:01 UTC (11+ messages)
` [PATCH 1/4] i2c: smbus: add core function handling SMBus host-notify
` [PATCH 2/4] i2c: addition of client reg/unreg callbacks
` [PATCH 3/4] dt-bindings: i2c-stm32: add SMBus Alert bindings
` [PATCH 4/4] i2c: stm32f7: Add SMBus-specific protocols support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).