messages from 2022-10-11 14:30:18 to 2022-10-11 20:58:34 UTC [more...]
[PATCH V2] arm64: dts: fix drive strength macros as per FSD HW UM
2022-10-11 20:58 UTC (2+ messages)
[PATCH v3 0/3] marvell,pp2.yaml and .dtsi improvements
2022-10-11 20:34 UTC (6+ messages)
` [PATCH v3 1/3] dt-bindings: net: marvell,pp2: convert to json-schema
` [PATCH v3 2/3] arm64: dts: marvell: Update network description to match schema
` [PATCH v3 3/3] ARM: dts: armada-375: "
[PATCH v4 0/4] Add RZ/G2L MTU3a MFD, Counter and pwm driver
2022-10-11 20:31 UTC (8+ messages)
` [PATCH v4 1/4] dt-bindings: mfd: Document RZ/G2L MTU3a bindings
[PATCH v1 0/5] Add PLREG and SPI Driver GXP Support
2022-10-11 20:27 UTC (12+ messages)
` [PATCH v1 1/5] soc: hpe: add support for HPE GXP Programmable Register Driver
` [PATCH v1 2/5] dt-bindings: soc: hpe: Add hpe,gxp-plreg
` [PATCH v1 3/5] ARM: dts: hpe: Add PLREG/SPI Support
` [PATCH v1 4/5] ARM: multi_v7_defconfig: Enable GXP SPI and PLREG Drivers
` [PATCH v1 5/5] MAINTAINERS: Add HPE SOC Drivers
[PATCH V4 0/7] imx: blk-ctrl: Add interconnect for i.MX8MP
2022-10-11 20:10 UTC (2+ messages)
[PATCH v17 0/2] Lattice sysCONFIG SPI FPGA manager
2022-10-11 19:38 UTC (3+ messages)
` [PATCH v17 1/2] fpga: lattice-sysconfig-spi: add Lattice sysCONFIG "
` [PATCH v17 2/2] dt-bindings: fpga: document "
[PATCH 00/19] Add base device tree files for QDU1000/QRU1000
2022-10-11 20:01 UTC (20+ messages)
` [PATCH 01/19] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
` [PATCH 02/19] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
` [PATCH 03/19] arm64: dts: qcom: qdru1000: Add tlmm nodes
[PATCH 1/2] arm64: dts: freescale: imx8dxl: add scu_gpio node
2022-10-11 19:47 UTC (2+ messages)
` [PATCH 2/2] arm64: dts: freescale: imx8dxl-evk: enable mii_select node
[PATCH v3 0/2] media: imx-jpeg, Add support for contiguous NV12
2022-10-11 19:47 UTC (5+ messages)
` [PATCH v3 1/2] media: imx-jpeg: Implement g_selection and s_selection
` [PATCH v3 2/2] media: imx-jpeg: Support contiguous and non contiguous format
[PATCH v2 0/3] Add devicetree support for max6639
2022-10-11 19:47 UTC (14+ messages)
` [PATCH v2 1/3] dt-bindings: hwmon: fan: Add fan binding to schema
` [PATCH v2 2/3] dt-bindings: hwmon: Add binding for max6639
` [PATCH v2 3/3] hwmon: (max6639) Change from pdata to dt configuration
[PATCH 0/3] Add Himax hx83112b touchscreen driver
2022-10-11 19:08 UTC (3+ messages)
` [PATCH 1/3] dt-bindings: touchscreen: add Himax hx83112b bindings
` [PATCH 3/3] arm64: dts: qcom: sdm632: fairphone-fp3: add touchscreen
[PATCH v2 1/4] arm64: dts: qcom: sdm630: add UART pin functions
2022-10-11 19:02 UTC (4+ messages)
` [PATCH v2 2/4] arm64: dts: qcom: sdm630: correct I2C8 "
` [PATCH v2 3/4] arm64: dts: qcom: sdm630: align TLMM pin configuration with DT schema
` [PATCH v2 4/4] dt-bindings: pinctrl: qcom,sdm630: convert to dtschema
[PATCH v5 00/13] Drivers for gunyah hypervisor
2022-10-11 19:01 UTC (11+ messages)
` [PATCH v5 03/13] gunyah: Common types and error codes for Gunyah hypercalls
` [PATCH v5 13/13] tty: gunyah: Add tty console driver for RM Console Services
[PATCH] dt-bindings: thermal: Convert generic-adc-thermal to DT schema
2022-10-11 18:46 UTC (2+ messages)
[PATCH] ASoC: dt-bindings: Convert dmic-codec to DT schema
2022-10-11 18:41 UTC
[PATCH 0/8] MIPS: ingenic: Add support for the JZ4755 SoC
2022-10-11 18:38 UTC (4+ messages)
` [PATCH 7/8] serial: 8250/ingenic: Add support for the JZ4750/JZ4755 SoCs
[PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support
2022-10-11 18:32 UTC (14+ messages)
` [PATCH v1 12/30] dt-bindings: reset: Add starfive,jh7110-reset bindings
` [PATCH v1 17/30] dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings
` [PATCH v1 20/30] dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings
` [PATCH v1 30/30] RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options
[PATCH v2 1/2] libfdt: add fdt_get_property_by_offset_w helper
2022-10-11 18:26 UTC (2+ messages)
` [PATCH v6 2/2] libfdt: tests: add get_next_tag_invalid_prop_len
[PATCH] dt-bindings: clock: Convert pwm-clock to DT schema
2022-10-11 17:37 UTC (3+ messages)
[PATCH v2 00/34] pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (5th set)
2022-10-11 17:23 UTC (35+ messages)
` [PATCH v2 01/34] dt-bindings: pinctrl: qcom,mdm9607: drop ref to pinctrl.yaml
` [PATCH v2 02/34] dt-bindings: pinctrl: qcom,sc7280: drop checks used in common TLMM
` [PATCH v2 03/34] dt-bindings: pinctrl: qcom,sc8180x: drop ref to pinctrl.yaml
` [PATCH v2 04/34] dt-bindings: pinctrl: qcom,sc8180x: drop checks used in common TLMM
` [PATCH v2 05/34] dt-bindings: pinctrl: qcom,sc8280xp: "
` [PATCH v2 06/34] dt-bindings: pinctrl: qcom,sm6115: use common TLMM schema
` [PATCH v2 07/34] dt-bindings: pinctrl: qcom,sm6125: drop checks used in common TLMM
` [PATCH v2 08/34] dt-bindings: pinctrl: qcom,sm6125: drop ref to pinctrl.yaml
` [PATCH v2 09/34] dt-bindings: pinctrl: qcom,sm6350: "
` [PATCH v2 10/34] dt-bindings: pinctrl: qcom,sm6350: drop checks used in common TLMM
` [PATCH v2 11/34] dt-bindings: pinctrl: qcom,sm6375-tlmm: drop ref to pinctrl.yaml
` [PATCH v2 12/34] dt-bindings: pinctrl: qcom,sm6375-tlmm: drop checks used in common TLMM
` [PATCH v2 13/34] dt-bindings: pinctrl: qcom,sm8250: use common TLMM schema
` [PATCH v2 14/34] dt-bindings: pinctrl: qcom,sm8350: drop ref to pinctrl.yaml
` [PATCH v2 15/34] dt-bindings: pinctrl: qcom,sm8350: drop checks used in common TLMM
` [PATCH v2 16/34] dt-bindings: pinctrl: qcom,sm8450: "
` [PATCH v2 17/34] dt-bindings: pinctrl: qcom,mdm9607-tlmm: minor style cleanups
` [PATCH v2 18/34] dt-bindings: pinctrl: qcom,msm8909-tlmm: "
` [PATCH v2 19/34] dt-bindings: pinctrl: qcom,qcm2290-tlmm: "
` [PATCH v2 20/34] dt-bindings: pinctrl: qcom,sdx65-tlmm: "
` [PATCH v2 21/34] dt-bindings: pinctrl: qcom,sc8180x-tlmm: "
` [PATCH v2 22/34] dt-bindings: pinctrl: qcom,sc8280xp-tlmm: "
` [PATCH v2 23/34] dt-bindings: pinctrl: qcom,sm6115-tlmm: "
` [PATCH v2 24/34] dt-bindings: pinctrl: qcom,sm6125-tlmm: "
` [PATCH v2 25/34] dt-bindings: pinctrl: qcom,sm6350-tlmm: "
` [PATCH v2 26/34] dt-bindings: pinctrl: qcom,sm6375-tlmm: "
` [PATCH v2 27/34] dt-bindings: pinctrl: qcom,sm8250: "
` [PATCH v2 28/34] dt-bindings: pinctrl: qcom,sm8350-tlmm: "
` [PATCH v2 29/34] dt-bindings: pinctrl: qcom,sm8450-tlmm: "
` [PATCH v2 30/34] dt-bindings: pinctrl: qcom,sc7280-lpass-lpi: "
` [PATCH v2 31/34] dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: "
` [PATCH v2 32/34] dt-bindings: pinctrl: qcom,sm8250-lpass-lpi: "
` [PATCH v2 33/34] dt-bindings: pinctrl: qcom,sm8450-lpass-lpi: "
` [PATCH v2 34/34] dt-bindings: pinctrl: qcom: adjust description
[PATCH AUTOSEL 4.19 01/11] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
2022-10-11 14:53 UTC (8+ messages)
` [PATCH AUTOSEL 4.19 03/11] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 4.19 04/11] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 4.19 05/11] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 4.19 06/11] ARM: dts: imx6sl: "
` [PATCH AUTOSEL 4.19 07/11] ARM: dts: imx6sll: "
` [PATCH AUTOSEL 4.19 08/11] ARM: dts: imx6sx: "
` [PATCH AUTOSEL 4.19 10/11] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
[PATCH AUTOSEL 5.10 01/17] arm64: dts: qcom: sdm845: narrow LLCC address space
2022-10-11 14:53 UTC (10+ messages)
` [PATCH AUTOSEL 5.10 02/17] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
` [PATCH AUTOSEL 5.10 04/17] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 5.10 05/17] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 5.10 06/17] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 5.10 07/17] ARM: dts: imx6sl: "
` [PATCH AUTOSEL 5.10 08/17] ARM: dts: imx6sll: "
` [PATCH AUTOSEL 5.10 09/17] ARM: dts: imx6sx: "
` [PATCH AUTOSEL 5.10 11/17] arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
` [PATCH AUTOSEL 5.10 16/17] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
[PATCH AUTOSEL 4.9 1/6] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
2022-10-11 14:54 UTC (5+ messages)
` [PATCH AUTOSEL 4.9 2/6] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 4.9 3/6] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 4.9 4/6] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 4.9 5/6] ARM: dts: imx6sl: "
[PATCH AUTOSEL 5.4 01/13] arm64: dts: qcom: sdm845: narrow LLCC address space
2022-10-11 14:53 UTC (9+ messages)
` [PATCH AUTOSEL 5.4 02/13] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
` [PATCH AUTOSEL 5.4 04/13] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 5.4 05/13] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 5.4 06/13] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 5.4 07/13] ARM: dts: imx6sl: "
` [PATCH AUTOSEL 5.4 08/13] ARM: dts: imx6sll: "
` [PATCH AUTOSEL 5.4 09/13] ARM: dts: imx6sx: "
` [PATCH AUTOSEL 5.4 12/13] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
[PATCH AUTOSEL 4.14 1/7] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
2022-10-11 14:54 UTC (5+ messages)
` [PATCH AUTOSEL 4.14 3/7] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 4.14 4/7] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 4.14 5/7] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 4.14 6/7] ARM: dts: imx6sl: "
[PATCH AUTOSEL 5.15 01/26] arm64: dts: qcom: sdm845: narrow LLCC address space
2022-10-11 14:52 UTC (11+ messages)
` [PATCH AUTOSEL 5.15 02/26] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
` [PATCH AUTOSEL 5.15 04/26] arm64: dts: qcom: sc7280-idp: correct ADC channel node name and unit address
` [PATCH AUTOSEL 5.15 05/26] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 5.15 06/26] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 5.15 07/26] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 5.15 08/26] ARM: dts: imx6sl: "
` [PATCH AUTOSEL 5.15 09/26] ARM: dts: imx6sll: "
` [PATCH AUTOSEL 5.15 10/26] ARM: dts: imx6sx: "
` [PATCH AUTOSEL 5.15 14/26] arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
` [PATCH AUTOSEL 5.15 24/26] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
[PATCH AUTOSEL 5.19 01/40] arm64: dts: qcom: sdm845: narrow LLCC address space
2022-10-11 14:51 UTC (16+ messages)
` [PATCH AUTOSEL 5.19 02/40] ARM: dts: imx6: delete interrupts property if interrupts-extended is set
` [PATCH AUTOSEL 5.19 03/40] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
` [PATCH AUTOSEL 5.19 05/40] arm64: dts: qcom: sc7280-idp: correct ADC channel node name and unit address
` [PATCH AUTOSEL 5.19 06/40] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 5.19 07/40] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 5.19 08/40] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 5.19 09/40] ARM: dts: imx6sl: "
` [PATCH AUTOSEL 5.19 10/40] ARM: dts: imx6sll: "
` [PATCH AUTOSEL 5.19 11/40] ARM: dts: imx6sx: "
` [PATCH AUTOSEL 5.19 12/40] ARM: dts: imx6sl: use tabs for code indent
` [PATCH AUTOSEL 5.19 13/40] ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
` [PATCH AUTOSEL 5.19 19/40] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage
` [PATCH AUTOSEL 5.19 20/40] arm64: dts: imx8ulp: no executable source file permission
` [PATCH AUTOSEL 5.19 21/40] arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
` [PATCH AUTOSEL 5.19 36/40] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
[PATCH AUTOSEL 6.0 01/46] arm64: dts: qcom: sdm845: narrow LLCC address space
2022-10-11 14:50 UTC (16+ messages)
` [PATCH AUTOSEL 6.0 02/46] ARM: dts: imx6: delete interrupts property if interrupts-extended is set
` [PATCH AUTOSEL 6.0 03/46] ARM: dts: imx7d-sdb: config the max pressure for tsc2046
` [PATCH AUTOSEL 6.0 05/46] arm64: dts: qcom: sc7280-idp: correct ADC channel node name and unit address
` [PATCH AUTOSEL 6.0 06/46] ARM: dts: imx6q: add missing properties for sram
` [PATCH AUTOSEL 6.0 07/46] ARM: dts: imx6dl: "
` [PATCH AUTOSEL 6.0 08/46] ARM: dts: imx6qp: "
` [PATCH AUTOSEL 6.0 09/46] ARM: dts: imx6sl: "
` [PATCH AUTOSEL 6.0 10/46] ARM: dts: imx6sll: "
` [PATCH AUTOSEL 6.0 11/46] ARM: dts: imx6sx: "
` [PATCH AUTOSEL 6.0 12/46] ARM: dts: imx6sl: use tabs for code indent
` [PATCH AUTOSEL 6.0 13/46] ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
` [PATCH AUTOSEL 6.0 19/46] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage
` [PATCH AUTOSEL 6.0 20/46] arm64: dts: imx8ulp: no executable source file permission
` [PATCH AUTOSEL 6.0 21/46] arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
` [PATCH AUTOSEL 6.0 42/46] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
[PATCH v6 0/6] Add support for TI TPS65219 PMIC
2022-10-11 14:48 UTC (3+ messages)
` [PATCH v6 6/6] arm64: defconfig: Add tps65219 as modules
[PATCH 1/4] ARM: dts: omap3-n900: fix LCD reset line polarity
2022-10-11 14:47 UTC (7+ messages)
[PATCH] ARM: dts: am335x-pcm-953: Define fixed regulators in root node
2022-10-11 14:31 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).