messages from 2026-04-10 15:54:54 to 2026-04-10 17:16:53 UTC [more...]
[PATCH v5 0/4] arm64: Add HPE GSC platform support
2026-04-10 17:16 UTC (5+ messages)
` [PATCH v5 1/4] dt-bindings: arm: hpe,gxp: Add HPE GSC platform compatible
` [PATCH v5 2/4] arm64: Kconfig: Add ARCH_HPE platform
` [PATCH v5 3/4] arm64: dts: hpe: Add HPE GSC SoC and DL340 Gen12 board DTS
` [PATCH v5 4/4] arm64: defconfig: Enable ARCH_HPE
[PATCH 0/4] soc: amlogic: clk-measure: add A1 and T7 support
2026-04-10 16:58 UTC (3+ messages)
` [PATCH 4/4] arm64: dts: amlogic: t7: Add clk measure support
[PATCH v5 0/3] hwmon: (sht3x) Add support for GXCAS GXHT30
2026-04-10 16:52 UTC (2+ messages)
[PATCH 0/8] arm64: amlogic: T7 thermal support
2026-04-10 16:48 UTC (9+ messages)
` [PATCH 1/8] dt-bindings: thermal: amlogic: Add support for T7
` [PATCH 2/8] firmware: meson: sm: Thermal calibration read via secure monitor
` [PATCH 3/8] firmware: meson: sm: Add thermal calibration SMC call
` [PATCH 4/8] thermal: amlogic: Add support for secure monitor calibration readout
` [PATCH 5/8] arm64: dts: amlogic: t7: Add cooling cells to all CPUs
` [PATCH 6/8] arm64: dts: amlogic: t7: Add thermal sensor nodes
` [PATCH 7/8] arm64: dts: amlogic: t7: Add thermal zones
` [PATCH 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to "
[PATCH] arm64: dts: qcom: monaco: Add default GIC address cells
2026-04-10 16:38 UTC (2+ messages)
[PATCH v2 00/10] Add MTU3 for RZ/T2H and RZ/N2H
2026-04-10 16:35 UTC (11+ messages)
` [PATCH v2 01/10] clk: renesas: r9a09g077: add MTU3 module clock
` [PATCH v2 02/10] mfd: rz-mtu3: use device-managed reset deassert
` [PATCH v2 03/10] mfd: rz-mtu3: use device-managed mfd_add_devices()
` [PATCH v2 04/10] mfd: rz-mtu3: store &pdev->dev in local variable
` [PATCH v2 05/10] mfd: rz-mtu3: make reset optional
` [PATCH v2 06/10] dt-bindings: timer: renesas,rz-mtu3: remove TCIU8 interrupt
` [PATCH v2 07/10] dt-bindings: timer: renesas,rz-mtu3: document RZ/{T2H,N2H}
` [PATCH v2 08/10] arm64: dts: renesas: r9a07g0{43,44,54}: remove TCIU8 interrupt from MTU3
` [PATCH v2 09/10] arm64: dts: renesas: r9a09g077: add MTU3 support
` [PATCH v2 10/10] arm64: dts: renesas: r9a09g087: "
[PATCH v4 0/4] PCI: tegra: Add Tegra264 support
2026-04-10 16:34 UTC (5+ messages)
` [PATCH v4 3/4] "
[PATCH v3 0/2] Add support for q50sn12072 and q54sn120a1
2026-04-10 16:30 UTC (3+ messages)
` [PATCH v3 2/2] hwmon: (pmbus/q54sj108a2) "
[PATCH v6 00/11] Add support for the TI BQ25792 battery charger
2026-04-10 10:52 UTC (2+ messages)
` (subset) "
[PATCH v12 0/2] add support in hwmon for MCP998X
2026-04-10 16:22 UTC (3+ messages)
` [PATCH v12 2/2] hwmon: add support "
[PATCH v8 0/3] spi: support the SpacemiT K1 SPI controller
2026-04-11 3:04 UTC (3+ messages)
` [PATCH v8 2/3] spi: spacemit: introduce SpacemiT K1 SPI controller driver
[PATCH v6 0/3] hwmon: emc2305: Support configurable fan PWM at shutdown
2026-04-10 16:05 UTC (3+ messages)
` [PATCH v6 1/3] hwmon: emc2305: Validate fan channel index
[PATCH v2 0/7] clk: qcom: Add initial clock controllers for the upcoming Hawi SoC
2026-04-10 15:58 UTC (15+ messages)
` [PATCH v2 1/7] dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for Hawi
` [PATCH v2 2/7] dt-bindings: clock: qcom: Add Hawi TCSR clock controller
` [PATCH v2 3/7] dt-bindings: clock: qcom: Add Hawi global "
` [PATCH v2 4/7] clk: qcom: rpmh: Add support for Hawi RPMH clocks
` [PATCH v2 5/7] clk: qcom: Add Hawi TCSR clock controller driver
` [PATCH v2 6/7] clk: qcom: clk-alpha-pll: Add support for Taycan EHA_T PLL
` [PATCH v2 7/7] clk: qcom: Add support for global clock controller on Hawi
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox