messages from 2026-07-15 08:31:35 to 2026-07-15 09:11:11 UTC [more...]
[PATCH v5 00/16] arm64: mediatek: Add M.2 E-key slot on Chromebooks
2026-07-15 9:11 UTC (21+ messages)
` [PATCH v5 01/16] device property: Add fwnode_graph_get_port_by_id()
` [PATCH v5 02/16] device property: Add fwnode_graph_get_next_port_endpoint()
` [PATCH v5 03/16] power: sequencing: Add pwrseq_power_is_on()
` [PATCH v5 04/16] usb: hub: Use assign_bit() in usb_hub_set_port_power()
` [PATCH v5 05/16] usb: hub: Return actual error from hub_configure() in hub_probe()
` [PATCH v5 06/16] usb: hub: Associate port@ fwnode with USB port device
` [PATCH v5 07/16] usb: core: Move struct usb_port and related APIs to port.h
` [PATCH v5 08/16] usb: hub: Pass |struct usb_port*| to usb_port_is_power_on()
` [PATCH v5 09/16] usb: hub: Use usb_hub_set_port_power() to control port power everywhere
` [PATCH v5 10/16] usb: hub: Power on connected M.2 E-key connectors with power sequencing API
` [PATCH v5 11/16] dt-bindings: usb: mediatek,mtk-xhci: Switch to ports for USB connections
` [PATCH v5 12/16] power: sequencing: pcie-m2: support matching on remote "port" node
` [PATCH v5 13/16] power: sequencing: pcie-m2: Add usb and sdio targets for E-key connector
` [PATCH v5 14/16] power: sequencing: pcie-m2: Split Bluetooth unit based on interface
` [PATCH v5 15/16] arm64: dts: mediatek: mt8195-cherry: Add M.2 E-key slot
` [PATCH v5 16/16] arm64: dts: mediatek: mt8188-geralt: Add WiFi/BT as "
[PATCH v2 0/6] R-Car X5H CPG/MDLC support
2026-07-15 9:10 UTC (4+ messages)
` [PATCH v2 4/6] pmdomain: renesas: Add R-Car X5H MDLC driver
[PATCH v2 0/4] hwmon: Add Kandou KB9002 PCIe retimer driver
2026-07-15 9:10 UTC (6+ messages)
` [PATCH v2 1/4] dt-bindings: Add vendor prefix for Kandou
` [PATCH v2 2/4] dt-bindings: hwmon: Add Kandou KB9002
` [PATCH v2 3/4] hwmon: (kb9002) Add driver for Kandou KB9002 retimer
` [PATCH v2 4/4] hwmon: (kb9002) Add documentation
[PATCH 0/2] io: accel: mma8452: Allow open drain interrupt pin configuration
2026-07-15 9:09 UTC (5+ messages)
` [PATCH 2/2] iio: "
[PATCH v8 0/3] thermal: imx: Add calibration offset support
2026-07-15 9:06 UTC (3+ messages)
` [PATCH v8 3/3] thermal/drivers/imx: "
[RFC PATCH 01/22] dt-bindings: memory: cdns,k3-ddr: Add Cadence K3 DDR controller binding
2026-07-15 9:03 UTC (6+ messages)
` [RFC PATCH 03/22] dt-bindings: memory: ti,j721s2-msmc: Add TI K3 MSMC binding
` "
` Re: [RFC PATCH 01/22] dt-bindings: memory: cdns,k3-ddr: Add Cadence K3 DDR controller binding
[PATCH RFC v2 0/9] Add System Controller support for RZ/T2H and RZ/N2H SoCs
2026-07-15 8:56 UTC (6+ messages)
[PATCH v3 0/8] can: rcar_canfd: Add support for Renesas RZ/G3S
2026-07-15 9:01 UTC (4+ messages)
` [PATCH v3 1/8] clk: r9a08g045-cpg: Add clocks and resets for CAN-FD
[PATCH 0/3] iio: light: ltr501: Add ltr329 support
2026-07-15 9:00 UTC (4+ messages)
` [PATCH 3/3] iio: light: ltr501: Add ltr329 driver support
[PATCH 0/7] Register MPM under CPU cluster power domain to manage RPM notification
2026-07-15 8:54 UTC (5+ messages)
` [PATCH 1/7] dt-bindings: interrupt-controller: mpm: Document power-domains property
[PATCH v4 0/2] drm/bridge: ti-sn65dsi83: Add reverse lvds lanes support
2026-07-15 8:49 UTC (3+ messages)
` [PATCH v4 2/2] drm/bridge: ti-sn65dsi83: Add reversed "
[PATCH v6 0/5] Add eDP lane mapping support
2026-07-15 8:32 UTC (4+ messages)
` [PATCH v6 3/5] drm/bridge: analogix_dp: Restore mandatory samsung DP DT properties
[RFC PATCH 00/10] net-next: add basic support for RK3568 XPCS
2026-07-15 8:44 UTC (5+ messages)
` [RFC PATCH 01/10] net: stmmac: move XPCS lifetime management to platform drivers
[PATCH v3 0/2] iio: adc: add MAX40080 current-sense amplifier driver
2026-07-15 8:34 UTC (3+ messages)
` [PATCH v3 2/2] "
[PATCH 0/2] thermal: loongson2: Add support for Loongson-2K0300 SoC
2026-07-15 8:31 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: thermal: loongson,ls2k-thermal: Add compatible for Loongson-2K0300
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox