messages from 2026-07-22 18:19:28 to 2026-07-22 21:24:58 UTC [more...]
[PATCH v3 0/2] mmc: core: Keep the card powered across suspend when firmware needs it live
2026-07-22 21:24 UTC (4+ messages)
` [PATCH v3 1/2] dt-bindings: mmc: Document no-mmc-poweroff-suspend property
` [PATCH v3 2/2] mmc: core: Add MMC_CAP2_NO_POWEROFF_SUSPEND host capability
[PATCH net-next v2 0/2] net: dsa: mt7530: add EcoNet EN7528 built-in switch support
2026-07-22 21:10 UTC (2+ messages)
[PATCH 0/3] thermal/drivers/sun8i: Add support for the Allwinner A80 thermal sensor
2026-07-22 21:10 UTC (11+ messages)
` [PATCH 1/3] dt-bindings: thermal: sun8i: Add binding for the A80 THS controller
` [PATCH 2/3] thermal/drivers/sun8i: Add support for the A80 THS
` [PATCH 3/3] ARM: dts: sun9i-a80: Add thermal sensor and thermal zones
` [PATCH v2 0/3] thermal/drivers/sun8i: Add support for the Allwinner A80 thermal sensor
` [PATCH v2 1/3] dt-bindings: thermal: sun8i: Add binding for the A80 THS controller
` [PATCH v2 2/3] thermal/drivers/sun8i: Add support for the A80 THS
` [PATCH v2 3/3] ARM: dts: sun9i-a80: Add thermal sensor and thermal zones
[PATCH v2 0/3] mmc: Add power_off_delay_us support
2026-07-22 21:06 UTC (6+ messages)
` [PATCH v2 1/3] dt-bindings: mmc: Add power-off-delay-us property
` [PATCH v2 2/3] mmc: core: Add mmc_delay_us() for microsecond precision delays
` [PATCH v2 3/3] mmc: core: Add power-off-delay-us support
[PATCH v3 0/5] clk: samsung: Introduce support for Exynos9610 clocks
2026-07-22 21:01 UTC (7+ messages)
` [PATCH v3 1/5] dt-bindings: clock: samsung: Add Exynos9610 CMU bindings
` [PATCH v3 2/5] dt-bindings: soc: exynos-sysreg: Add Exynos9610 SYSREG bindings
` [PATCH v3 3/5] clk: samsung: clk-pll: Add support for pll_1061x
` [PATCH v3 4/5] clk: samsung: Introduce Exynos9610 clock controller driver
` [PATCH v3 5/5] MAINTAINERS: Add entry for Exynos9610
[PATCH 0/2] riscv: dts: spacemit: add eeprom for K3 CoM260
2026-07-22 20:37 UTC (4+ messages)
` [PATCH 1/2] riscv: dts: spacemit: k3-com260: add eeprom on i2c2
` [PATCH 2/2] riscv: dts: spacemit: k3-com260-ifx: add eeprom on i2c1
[PATCH] dt-bindings: arm: omap: Convert L4 interconnect to DT schema
2026-07-22 20:36 UTC (2+ messages)
[PATCH RFC 0/2] regmap: support firmware-described non-sequential register reads
2026-07-22 20:20 UTC (6+ messages)
` [PATCH RFC 1/2] dt-bindings: regmap: add common schema for no-sequential-read
[PATCH v2 0/3] media: rc: sunxi-cir: support the A523/H728/T527 IR receiver
2026-07-22 20:17 UTC (4+ messages)
` [PATCH v2 1/3] media: dt-bindings: allwinner,sun4i-a10-ir: add A523 compatible
` [PATCH v2 2/3] arm64: dts: allwinner: a523: add IR receiver nodes
` [PATCH v2 3/3] arm64: dts: allwinner: a523: enable IR receiver on the X96Q Pro+
[PATCH 0/6] rtc: abx80x: add support for ABX81X
2026-07-22 20:16 UTC (13+ messages)
` [PATCH 1/6] dt-bindings: rtc: abx80x: document ABX81X RTCs
` [PATCH 2/6] rtc: abx80x: add irq to struct abx80x_priv
` [PATCH 3/6] rtc: abx80x: use regmap instead of I2C specific API
` [PATCH 4/6] rtc: abx80x: replace read-modify-write pattern with regmap helpers
` [PATCH 5/6] rtc: abx80x: create abx80x_i2c_probe()
` [PATCH 6/6] rtc: abx80x: add support for ABX81X
[PATCH v21 00/12] Add Renesas RZ/G3L SD/eMMC support
2026-07-22 20:13 UTC (2+ messages)
[PATCH] dt-bindings: sound: Convert TI OMAP2+ McBSP to DT schema
2026-07-22 20:09 UTC (2+ messages)
[PATCH v2 0/2] i3c: dw: Document optional core reset and drop redundant name
2026-07-22 19:57 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: i3c: dw: Document missing optional core reset
[PATCH 0/2] Add i.MX952 FRDM board support
2026-07-22 19:56 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: arm: fsl: add i.MX952 FRDM board
[PATCH] dt-bindings: PCI: rcar-gen4-pci-host: Document optional msi-parent
2026-07-22 19:54 UTC (2+ messages)
[PATCH 0/2] mmc: Add post-power-off-delay-ms support
2026-07-22 19:51 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: mmc: Add post-power-off-delay-ms property
[PATCH net-next v8 0/4] net: pse-pd: add Realtek PSE MCU support
2026-07-22 19:49 UTC (4+ messages)
` [PATCH net-next v8 1/4] dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
[PATCH v1 0/4] drm: mxsfb: Support LCDIF interface pixel format
2026-07-22 19:46 UTC (8+ messages)
` [PATCH v1 1/4] dt-bindings: lcdif: Add "
[PATCH] dt-bindings: display: panel-lvds: Add boe,dv215fhm-r01 compatible
2026-07-22 19:39 UTC (2+ messages)
[PATCH v2 0/4] ARM: dts: imx: fix ldb related CHECK_DTBS warnings
2026-07-22 19:36 UTC (6+ messages)
` [PATCH v2 2/4] dt-bindings: soc: imx-iomuxc-gpr: allow bridge@18 as child node
` [PATCH v2 3/4] dt-bindings: display: lcdif: Allow display0 child node for i.MX6UL
[PATCH v4 0/7] clk: Add support for clock nexus
2026-07-22 19:34 UTC (3+ messages)
` [PATCH v4 1/7] dt-bindings: clock: Introduce nexus nodes
[PATCH] dt-bindings: i3c: dw: Document missing optional core reset
2026-07-22 19:23 UTC (3+ messages)
[PATCH v4 0/9] Add RZ/G3L USB2.0 host support
2026-07-22 19:15 UTC (2+ messages)
[PATCH v4 0/6] of: teach overlay code to keep /aliases in sync
2026-07-22 19:09 UTC (7+ messages)
` [PATCH v4 1/6] of: resolve alias-prefixed paths under devtree_lock
` [PATCH v4 4/6] of/overlay: return ERR_PTR from dup_and_fixup_symbol_prop()
[PATCH net-next v5 0/8] net: mdio: realtek-rtl9300: Add RTL83xx support
2026-07-22 19:09 UTC (11+ messages)
` [PATCH net-next v5 2/8] net: mdio: realtek-rtl9300: Add polling documentation
` [PATCH net-next v5 3/8] net: phy: add (*notify_phy_attach/detach)() hooks to struct mii_bus
` [PATCH net-next v5 4/8] net: mdio: realtek-rtl9300: Configure hardware polling during probing
` [PATCH net-next v5 5/8] net: mdio: realtek-rtl9300: Add page tracking
` [PATCH net-next v5 6/8] net: mdio: realtek-rtl9300: Increase MDIO timeout
[PATCH v2 00/10] hwmon: Add Qualcomm SPMI BCL driver
2026-07-22 18:59 UTC (7+ messages)
` [PATCH v2 02/10] hwmon: Add Qualcomm PMIC "
[RFC PATCH 0/3] media: rockchip: VEPU510 H.264 encoder for RK3576
2026-07-22 18:29 UTC (2+ messages)
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox