messages from 2026-07-30 01:29:11 to 2026-07-30 04:32:05 UTC [more...]
[PATCH v6 0/7] Read MAC address from SST vendor specific SFDP region
2026-07-30 4:32 UTC (5+ messages)
` [PATCH v6 4/7] nvmem: layouts: add Microchip/SST SFDP EUI layout driver
` [PATCH v6 6/7] ARM: dts: microchip: sama5d27_wlsom1: read MAC address from QSPI SFDP
[PATCH 0/3] arm64: dts: imx95-15x15-frdm: support CAN transceivers sharing a silent GPIO
2026-07-30 4:33 UTC (4+ messages)
` [PATCH 1/3] phy: phy-can-transceiver: default silent GPIO to high during probe
` [PATCH 2/3] arm64: select HAVE_SHARED_GPIOS for ARCH_MXC
` [PATCH 3/3] arm64: dts: imx95-15x15-frdm: fix duplicated can-phy node names
[PATCH v6 0/4] hwmon: pmbus: add MPS MPQ8646 support
2026-07-30 4:26 UTC (12+ messages)
` [PATCH v6 2/4] dt-bindings: hwmon: pmbus: add MPS MPQ8646
` [PATCH v6 3/4] hwmon: pmbus: add MPQ8646 driver
` [PATCH v6 4/4] hwmon: pmbus: mpq8646: gate the writes
[PATCH v2 1/2] arm64: dts: qcom: qcs6490-rubikpi3: Add 3.3 V output supply
2026-07-30 3:31 UTC (2+ messages)
[PATCH v1 0/7] Add HPD support for Rockchip Analogix DP
2026-07-30 3:41 UTC (10+ messages)
` [PATCH v1 1/7] drm/bridge: analogix_dp: Manage pm runtime and IRQ for native HPD pin detection
` [PATCH v1 2/7] drm/bridge: analogix_dp: Return bitmask from analogix_dp_get_irq_type()
` [PATCH v1 3/7] drm/bridge: analogix_dp: Extend mute/unmute HPD interrupts to accept irq bitmask
` [PATCH v1 6/7] drm/bridge: analogix_dp: Use platform-specific HPD detection scheme
` [PATCH v1 4/7] drm/bridge: analogix_dp: Extend clear_hotplug_interrupts to accept IRQ bitmask
[PATCH v2 00/12] arm64: dts: freescale: fix reserved memory node names for remoteproc
2026-07-30 3:26 UTC (3+ messages)
[PATCH 0/2] Add bindings and driver for Sony IMX908
2026-07-30 3:24 UTC (6+ messages)
` [PATCH 1/2] media: dt-bindings: imx908: Add Sony IMX908 sensor bindings
` [PATCH 2/2] media: i2c: Add Sony IMX908 image sensor driver
[PATCH v32 0/7] firmware: imx: driver for NXP secure-enclave
2026-07-30 3:06 UTC (12+ messages)
` [PATCH v32 1/7] Documentation/firmware: add imx/se to other_interfaces
` [PATCH v32 2/7] dt-bindings: arm: fsl: add imx-se-fw binding doc
` [PATCH v32 3/7] firmware: imx: add driver for NXP EdgeLock Enclave
` [PATCH v32 4/7] firmware: imx: device context dedicated to priv
` [PATCH v32 5/7] firmware: imx: adds miscdev
` [PATCH v32 6/7] arm64: dts: imx8ulp: add secure enclave node
` [PATCH v32 7/7] arm64: dts: imx8ulp: add reserved memory for EdgeLock Enclave
[PATCH v5 0/4] Add support for MAX20830C and MAX20840C step-down DC-DC switching regulator
2026-07-30 2:42 UTC (13+ messages)
` [PATCH v5 1/4] dt-bindings: hwmon: (pmbus/max20830): add VOUT feedback resistor properties and complete examples
` [PATCH v5 2/4] hwmon: (pmbus/max20830): add VOUT feedback resistor scaling support
` [PATCH v5 3/4] dt-bindings: hwmon: (pmbus/max20830): add max20830c and max20840c support
` [PATCH v5 4/4] hwmon: (pmbus/max20830): add support for max20830c and max20840c
[PATCH 1/2] ASoC: dt-bindings: es8316: Add regulator supplies
2026-07-30 2:26 UTC (2+ messages)
[PATCH 0/2] SM8475 sndcard support
2026-07-30 2:24 UTC (4+ messages)
` [PATCH 2/2] ASoC: qcom: sc8280xp: Add support for SM8475
[PATCH v3 0/4] dt-bindings: arm: qcom-soc: Improve validation of expected SoC naming
2026-07-30 1:55 UTC (2+ messages)
[PATCH] arm64: dts: qcom: eliza: Fix DSI1 phy reference clock rate
2026-07-30 1:55 UTC (2+ messages)
[PATCH] arm64: dts: qcom: eliza: Enable cpufreq cooling devices
2026-07-30 1:55 UTC (2+ messages)
[PATCH v3] arm64: dts: qcom: eliza-evk: Add support for USB and SD card
2026-07-30 1:55 UTC (2+ messages)
[PATCH v3] arm64: dts: qcom: eliza: Describe the ADSP GPR node
2026-07-30 1:55 UTC (2+ messages)
[PATCH v3 0/2] Add device tree for Acer Swift Go Pro AI (SFA14-11)
2026-07-30 1:45 UTC (3+ messages)
` [PATCH v3 2/2] arm64: dts: qcom: Add support "
[PATCH v11 0/3] thermal: imx: Add calibration offset support
2026-07-30 1:29 UTC (2+ messages)
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox