messages from 2026-08-13 13:06:40 to 2026-08-13 15:46:11 UTC [more...]
[PATCH v4 0/5] pinctrl: renesas: rzg2l: Add support for RZ/G3S I3C
2026-08-13 15:45 UTC (17+ messages)
` [PATCH v4 1/5] pinctrl: renesas: rzg2l: Generalize the power source code
` [PATCH v4 2/5] pinctrl: renesas: rzg2l: Drop defines present in struct rzg2l_hwcfg
` [PATCH v4 3/5] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Document the missing I3C power source option
` [PATCH v4 4/5] pinctrl: renesas: rzg2l: Add RZ/G3S support for selecting the I3C power source
[PATCH v1] arm64: dts: ti: k3-am62-verdin: Set MMC clock pins as OUTPUT
2026-08-13 15:45 UTC (4+ messages)
[PATCH 0/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V1 and V2
2026-08-13 15:43 UTC (12+ messages)
` [PATCH 1/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS
` [PATCH 2/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex DSI to LVDS adapter with 10.1" display
` [PATCH 3/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS
` [PATCH 4/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2
` [PATCH 5/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display
` [PATCH 6/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS V2
[PATCH v2 00/14] Enable USB3 for Qualcomm IPQ5018 and IPQ5332
2026-08-13 15:38 UTC (5+ messages)
` [PATCH v2 08/14] arm64: dts: qcom: ipq5332: Add clocks required for USB3 support
` [PATCH v2 09/14] arm64: dts: qcom: ipq5018: "
[PATCH v3 0/4] ARM: dts: vf: Iris carrier board for the Colibri VF50 and VF61
2026-08-13 15:20 UTC (8+ messages)
` [PATCH v3 1/4] ARM: dts: vf-colibri: apply the EXT_IO pin group
` [PATCH v3 2/4] ARM: dts: vf-colibri: name the SODIMM gpio lines
` [PATCH v3 3/4] dt-bindings: arm: fsl: add the Colibri VF50 and VF61 on Iris
` [PATCH v3 4/4] ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61
[PATCH v5 00/15] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase
2026-08-13 15:12 UTC (2+ messages)
[PATCH 0/2] arm64: dts: qcom: Add eDP display overlays for hamoa and purwa IoT EVKs
2026-08-13 14:59 UTC (12+ messages)
` [PATCH 1/2] arm64: dts: qcom: hamoa-iot-evk: Add eDP display overlay
[PATCH] dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop invalid JSON pointer
2026-08-13 14:53 UTC
[PATCH v4] dt-bindings: arm: mediatek: mediatek,g3dsys: Convert to DT schema
2026-08-13 14:39 UTC (3+ messages)
[PATCH 0/2] TQMa6UL[L]x[L] DT improvements
2026-08-13 14:00 UTC (7+ messages)
` [PATCH 1/2] ARM: dts: mba6ulx: Add Ethernet PHY interrupt support
` [PATCH 2/2] ARM: dts: mba6ulx: Add USB hub node
[PATCH v5 0/6] soc: aspeed: Add BMC and host driver for PCIe BMC device
2026-08-13 14:23 UTC (5+ messages)
` [PATCH v5 4/6] soc: mfd: add ASPEED AST2600 PCIe BMC device driver
[PATCH v9 0/4] Enable multi-owner I2C support for QCOM GENI controllers
2026-08-13 14:19 UTC (9+ messages)
` [PATCH v9 1/4] dt-bindings: i2c: qcom,i2c-geni: Document multi-owner controller support
` [PATCH v9 2/4] dmaengine: qcom: gpi: Add lock/unlock TREs for multi-owner I2C transfers
` [PATCH v9 3/4] soc: qcom: geni-se: Keep pinctrl active for multi-owner controllers
` [PATCH v9 4/4] i2c: qcom-geni: Support multi-owner controllers in GPI mode
[PATCH net-next v4 0/5] ptp: ocp: Add R4006 and V9 I2C peripheral support
2026-08-13 14:17 UTC (11+ messages)
` [PATCH net-next v4 1/5] dt-bindings: leds: Add IS32FL3207 controller
` [PATCH net-next v4 2/5] leds: is32fl3207: Add controller driver
` [PATCH net-next v4 3/5] i2c: mux: Propagate software nodes to channel adapters
` [PATCH net-next v4 4/5] ptp: ocp: Add R4006 I2C peripheral topology
` [PATCH net-next v4 5/5] ptp: ocp: Add Time Card V9 "
[PATCH 0/2] Introduces MDSYNC support for CS35L45
2026-08-13 14:12 UTC (4+ messages)
` [PATCH 2/2] ASoC: cs35l45: Adds support for SYNC bus
[PATCH v3 00/14] iio: adc: Add AD7768/AD7768-4 ADC driver support
2026-08-13 13:57 UTC (15+ messages)
` [PATCH v3 01/14] dt-bindings: iio: adc: Add AD7768
` [PATCH v3 02/14] iio: backend: Add support for CRC
` [PATCH v3 03/14] iio: adc: adi-axi-adc: Initialize state mutex
` [PATCH v3 04/14] iio: adc: adi-axi-adc: Add support for CRC
` [PATCH v3 05/14] iio: adc: Add AD7768 and AD7768-4 core support
` [PATCH v3 06/14] iio: adc: ad7768: Add configurable sampling modes
` [PATCH v3 07/14] iio: adc: ad7768: Add calibration controls
` [PATCH v3 08/14] iio: adc: ad7768: Add per-channel conversion delay
` [PATCH v3 09/14] iio: adc: ad7768: Add VCM regulator support
` [PATCH v3 10/14] iio: adc: ad7768: Register GPIO auxiliary device
` [PATCH v3 11/14] gpio: regmap: Use regmap_test_bits() for single bit reads
` [PATCH v3 12/14] gpio: regmap: Add optional runtime PM support
` [PATCH v3 13/14] gpio: ad7768: Add AD7768 GPIO auxiliary driver
` [PATCH v3 14/14] Documentation: iio: Add AD7768 Documentation
[PATCH v13 00/11] clk / reset: realtek: Add RTD1625 clock and reset support
2026-08-13 13:49 UTC (9+ messages)
` [PATCH v13 01/11] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller
[PATCH 0/6] Add SpacemiT K1 USB2.0 controllers support
2026-08-13 13:39 UTC (4+ messages)
` [PATCH 2/6] usb: chipidea: usb2: add optional reset support
[PATCH V3 1/4 net] net: dsa: b53: deal with Northstar devices using CPU port 5 or 7
2026-08-13 13:40 UTC (3+ messages)
` [PATCH V3 2/4 net-next?] net: dsa: b53: prefer CPU port 8 for Northstar devices
[PATCH v7 0/2] mfd: add X-Powers AC200 support
2026-08-13 13:31 UTC (4+ messages)
` [PATCH v7 1/2] dt-bindings: mfd: x-powers: Add AC200
[PATCH v7 0/3] drm/bridge: ti-sn65dsi83: Add reverse lvds lanes support
2026-08-13 13:30 UTC (2+ messages)
` (subset) "
[PATCH v6 0/6] phy: realtek: usb2: support for RTL9607C USB2 PHY
2026-08-13 13:25 UTC (5+ messages)
` [PATCH v6 5/6] phy: realtek: usb2: add "
[PATCH v5 00/11] arm64: dts: monaco-arduino-monza: Add support for LGA WiFi/BT module
2026-08-13 13:23 UTC (3+ messages)
` [PATCH v5 03/11] power: sequencing: Add pwrseq_is_controllable() API
[PATCH v3 0/3] Ambarella CV75: pinctrl and PL061 GPIO
2026-08-13 13:07 UTC (3+ messages)
` [PATCH v3 2/3] gpio: pl061: add Ambarella CV75 register layout variant
[PATCH v24 00/12] Implement PSCI reboot mode driver for PSCI resets
2026-08-13 13:06 UTC (4+ messages)
` [PATCH v24 04/12] mfd: psci-mfd: Add PSCI MFD driver for cpuidle-psci-domain cell
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox