messages from 2026-10-16 14:55:50 to 2026-10-16 17:43:51 UTC [more...]
[PATCH v4 0/8] Arm Live Firmware Activation (LFA) support
2026-10-16 17:43 UTC (9+ messages)
` [PATCH v4 2/8] firmware: smccc: Add support for Live Firmware Activation (LFA)
` [PATCH v4 6/8] firmware: smccc: lfa: Register DT interrupt
[PATCH v4 0/2] power: supply: qcom_smbx: add SMB5 support
2026-10-16 17:43 UTC (2+ messages)
[PATCH v6 0/3] Enable DW9714V camera focus coils on SHIFT 6MQ
2026-10-16 17:38 UTC (4+ messages)
` [PATCH v6 1/3] dt-bindings: media: i2c: dongwoon,dw9714: Document DW9714A and V variant
` [PATCH v6 2/3] arm64: dts: qcom: sdm845-shift-axolotl: Add actuator for main rear camera
` [PATCH v6 3/3] arm64: dts: qcom: sdm845-shift-axolotl: Add actuator for second "
[PATCH v10 00/10] io: accel: mma8452: Allow open drain interrupt pin configuration
2026-10-16 17:33 UTC (10+ messages)
` [PATCH v10 10/10] iio: accel: mma8452: Support interrupt sharing
[PATCH 0/4] edac: qcom: add DDR DRAM ECC reporting for Shikra (QCM2390)
2026-10-16 17:26 UTC (5+ messages)
` [PATCH 2/4] soc: qcom: llcc: add LCP/SRP DDR DRAM ECC register offsets
` [PATCH 3/4] edac: qcom: add LCP/SRP DDR DRAM ECC support for Shikra
[PATCH v7 0/4] arm64: amlogic: T7 thermal support
2026-10-16 17:25 UTC (6+ messages)
` [PATCH v7 1/4] arm64: dts: amlogic: t7: Add cooling cells to all CPUs
` [PATCH v7 2/4] arm64: dts: amlogic: t7: Add thermal sensor nodes
` [PATCH v7 3/4] arm64: dts: amlogic: t7: Add thermal zones
` [PATCH v7 4/4] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to "
[PATCH v3 0/3] Use icc-clk for the SM8250 camera NoC AXI clock
2026-10-16 17:22 UTC (5+ messages)
` [PATCH v3 1/3] dt-bindings: clock: qcom,camcc-sm8250: add interconnect provider
` [PATCH v3 2/3] clk: qcom: camcc-sm8250: use icc-clk for camera NoC AXI clock
` [PATCH v3 3/3] arm64: dts: qcom: sm8250: add camcc interconnect cells
[PATCH v1 1/1] arm64: dts: imx8mm-var-dart-sonata: Add OV5640 camera support
2026-10-16 17:03 UTC (3+ messages)
[PATCH v6 0/2] Input: add support for OnePlus/OPPO Pad pogo-pin keyboards
2026-10-16 16:49 UTC (5+ messages)
` [PATCH v6 1/2] dt-bindings: input: add OnePlus pogo-pin keyboard
` [PATCH v6 2/2] Input: add OnePlus/OPPO Pad pogo-pin keyboard serdev driver
[RFC PATCH 0/7] i3c: hub: p3h2x4x: add debugfs, i2c-tools, bus rate and GPIO mode support
2026-10-16 16:46 UTC (8+ messages)
` [RFC PATCH 1/7] i3c: hub: p3h2x4x: Add support for debugfs
` [RFC PATCH 2/7] i3c: hub: add i2c-tools support for SMBus-configured target ports
` [RFC PATCH 3/7] dt-bindings: i3c: nxp,p3h2840: add clock-frequency for SMBus "
` [RFC PATCH 4/7] i3c: hub: p3h2x4x: add clock-frequency DTS support
` [RFC PATCH 5/7] dt-bindings: i3c: nxp,p3h2840: add GPIO mode target ports
` [RFC PATCH 6/7] i3c: hub: p3h2x4x: configure target ports placed in GPIO mode
` [RFC PATCH 7/7] gpio: p3h2x4x: add GPIO expander for the NXP P3H2x4x I3C hub
[PATCH 0/2] backlight: Add Awinic AW99703 driver
2026-10-16 16:39 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: leds: backlight: Add Awinic AW99703 backlight
` [PATCH 2/2] backlight: Add Awinic AW99703 backlight driver
[PATCH v4 1/2] dt-bindings: input: add OnePlus pogo-pin keyboard
2026-10-16 16:35 UTC (2+ messages)
[PATCH v2 2/2] arm64: dts: qcom: oneplus-kebab: new device
2026-10-16 16:38 UTC
[PATCH v3 0/4] mfd: aat2870: Convert to use OF bindings
2026-10-16 16:27 UTC (8+ messages)
` [PATCH v3 1/4] dt-bindings: mfd: Document Skyworks AAT2870
` [PATCH v3 2/4] mfd: aat2870: Derive brightness steps from max current
` [PATCH v3 3/4] mfd: aat2870: Convert to use OF bindings
[PATCH v4 0/8] R-Car X5H Ironhide CPG/MDLC SCMI remapping support
2026-10-16 16:17 UTC (16+ messages)
` [PATCH v4 1/8] clk: renesas: r8a78000: Add clk_hw to clk_map
` [PATCH v4 2/8] clk: renesas: r8a78000: Add SCMI remapping support
` [PATCH v4 3/8] reset: Extract __reset_control_get_from_provider()
` [PATCH v4 4/8] reset: Add reset_control_get_from_provider_exclusive()
` [PATCH v4 5/8] pmdomain: Make genpd_get_from_provider() return -EPROBE_DEFER
` [PATCH v4 6/8] pmdomain: Make genpd_get_from_provider() public
` [PATCH v4 7/8] pmdomain: renesas: r8a78000: Add SCMI remapping support
` [PATCH v4 8/8] arm64: dts: renesas: ironhide: Enable SCMI devpd, sys, clock, and reset
[PATCH 0/2] media: ov13858: device tree support for the Surface Pro 11 (Snapdragon)
2026-10-16 16:16 UTC (4+ messages)
` [PATCH 2/2] media: i2c: ov13858: Add device tree support
[PATCH v2 0/6] Keep the fuse clock enabled while the Tegra GPU is powered
2026-10-16 16:13 UTC (8+ messages)
` [PATCH v2 1/6] dt-bindings: gpu: nvidia,gk20a: Require the fuse clock
` [PATCH v2 2/6] ARM: tegra: Add the fuse clock to the Tegra124 GPU
` [PATCH v2 3/6] arm64: tegra: Add the fuse clock to the Tegra132 GPU
` [PATCH v2 4/6] arm64: tegra: Add the fuse clock to the Tegra186 GPU
` [PATCH v2 5/6] arm64: tegra: Add the fuse clock to the Tegra210 GPU
` [PATCH v2 6/6] drm/nouveau/tegra: Keep the fuse clock enabled while the GPU is powered
[PATCH RFC 0/2] media: imx681: C-PHY for the Surface Pro 11 (Snapdragon)
2026-10-16 16:08 UTC (7+ messages)
` [PATCH RFC 2/2] media: i2c: imx681: Add C-PHY support
` [PATCH RFC 1/2] dt-bindings: media: sony,imx681: Allow a C-PHY bus
[PATCH v3 0/5] media: rockchip: rkisp2: Add driver for ISP on Rk3588
2026-10-16 16:06 UTC (10+ messages)
` [PATCH v3 1/5] media: rockchip: rkisp2: Add rkisp2 driver
` [PATCH v3 2/5] media: rkisp2: Add parameters output video node
` [PATCH v3 3/5] media: rkisp2: Add statistics capture "
` [PATCH v3 5/5] arm64: dts: rockchip: add ISP nodes to rk3588
[PATCH 1/2] dt-bindings: media: i2c: dongwoon,dw9719: Document DW9714VA
2026-10-16 16:04 UTC (3+ messages)
[PATCH RFC v2 0/2] arm64: dts: qcom: introduce minimal Xiaomi Warsaw support
2026-10-16 15:53 UTC (3+ messages)
` [PATCH RFC v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Warsaw
` [PATCH RFC v2 2/2] arm64: dts: qcom: Add a minimal Xiaomi Warsaw description
[PATCH net 0/2] net: ethernet: qualcomm: ppe: Fix queue access and port validation
2026-10-16 15:50 UTC (5+ messages)
` [PATCH net 1/2] net: ethernet: qualcomm: ppe: Fix multicast queue admission control access
` [PATCH net 2/2] dt-bindings: net: qcom,ipq9574-ppe: Apply PPE constraints to all switch ports
[PATCH net-next v3 0/9] net/stmmac: Add Mediatek MT8189 support
2026-10-16 15:48 UTC (8+ messages)
` [PATCH net-next v3 1/9] dt-bindings: net: mediatek-dwmac: fix unit in rx/tx delay property description
` [PATCH net-next v3 2/9] dt-bindings: net: mediatek-dwmac: add support for MT8189 SoC
` [PATCH net-next v3 7/9] net: stmmac: mediatek: use TX clock phase shift in RGMII mode with 1Gbps speed
[PATCH v6 0/2] Add support for SA8255P in the qcom-qmp-usb phy driver
2026-10-16 15:46 UTC (3+ messages)
` [PATCH v6 2/2] phy: qcom: qmp-usb: Add support for SA8255P
[PATCH v3 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver
2026-10-16 15:44 UTC (6+ messages)
` [PATCH v3 2/2] phy: qcom-snps-femto-v2: Add support for SA8255P
[PATCH 0/9] arm64: qcom: enable display card support on SM8150 HDK
2026-10-16 15:39 UTC (3+ messages)
` [PATCH 2/9] backlight: qcom-wled: fix string detection brightness on WLED5
[PATCH v4 0/5] iio: pressure: dps310: add Zilltek ZTS8032
2026-10-16 15:35 UTC (6+ messages)
` [PATCH v4 1/5] dt-bindings: vendor-prefixes: Add ZillTek Technology
` [PATCH v4 2/5] dt-bindings: iio: pressure: infineon,dps310: Add Zilltek ZTS8032
` [PATCH v4 3/5] iio: pressure: dps310: add per-chip data
` [PATCH v4 4/5] iio: pressure: dps310: add an OF match table
` [PATCH v4 5/5] iio: pressure: dps310: add Zilltek ZTS8032 support
[PATCH v3 0/3] Add STM32 TAMP nvram driver support
2026-10-16 15:26 UTC (4+ messages)
` [PATCH v3 1/3] dt-bindings: nvmem: add STM32MPX TAMP backup registers
` [PATCH v3 2/3] dt-bindings: arm: stm32: allow TAMP nvram child node for syscon
` [PATCH v3 3/3] nvmem: stm32: add TAMP nvmem driver
[PATCH net-next v2 0/3] net: ethernet: qualcomm: ppe: Add IPQ5332 support
2026-10-16 15:24 UTC (4+ messages)
` [PATCH net-next v2 1/3] net: ethernet: qualcomm: ppe: Select hardware configuration by SoC
` [PATCH net-next v2 2/3] dt-bindings: net: qcom,ipq9574-ppe: Add IPQ5332 support
` [PATCH net-next v2 3/3] net: ethernet: qualcomm: ppe: "
[PATCH net-next v25 0/3] net: phy: Add driver for Motorcomm Quad 2.5GbE phy
2026-10-16 15:18 UTC (3+ messages)
` [PATCH net-next v25 3/3] "
[PATCH net-next v2 0/2] net: phy: qcom: add qca808x support
2026-10-16 15:17 UTC (7+ messages)
` [PATCH net-next v2 2/2] net: phy: qcom: qca808x: Add regulator management
[PATCH 0/3] from my MSM8916-mainline:
2026-10-16 15:11 UTC (6+ messages)
` [PATCH 2/3] iio: light: Update DT bindings for GP2AP002
` [PATCH 3/3] arm64: dts: qcom: msm8916-samsung-j5: Add proximity sensor
[PATCH 00/10] ARM: dts: dm816x: fixes and peripheral updates for DM8168 SoC
2026-10-16 15:07 UTC (4+ messages)
` [PATCH 02/10] dt-bindings: pinctrl: Add devicetree bindings for DM816x SoC Pinctrl
[PATCH v2 0/3] dmaengine: fsl-edma: per-channel IOMMU support via DT child nodes
2026-10-16 15:05 UTC (4+ messages)
` [PATCH v2 2/3] dmaengine: fsl-edma: support per-channel "
[PATCH v7 3/3] media: i2c: hm1092: Add ACPI enumeration and the 19.2 MHz configuration
2026-10-16 15:05 UTC (3+ messages)
[PATCH 0/6] Add AMD PL Mailbox and RPMsg support for the AMD BRAM remoteproc
2026-10-16 15:02 UTC (6+ messages)
` [PATCH 4/6] mailbox: Add AMD PL Mailbox soft IP controller
[PATCH] dt-bindings: crypto: qcom,inline-crypto-engine: Add IPQ5210, IPQ5424 and IPQ9650
2026-10-16 14:55 UTC (2+ messages)
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox