messages from 2026-10-16 17:07:26 to 2026-10-16 17:43:51 UTC [more...]
[PATCH v4 0/8] Arm Live Firmware Activation (LFA) support
2026-10-16 17:43 UTC (9+ messages)
` [PATCH v4 2/8] firmware: smccc: Add support for Live Firmware Activation (LFA)
` [PATCH v4 6/8] firmware: smccc: lfa: Register DT interrupt
[PATCH v4 0/2] power: supply: qcom_smbx: add SMB5 support
2026-10-16 17:43 UTC (2+ messages)
[PATCH v6 0/3] Enable DW9714V camera focus coils on SHIFT 6MQ
2026-10-16 17:38 UTC (4+ messages)
` [PATCH v6 1/3] dt-bindings: media: i2c: dongwoon,dw9714: Document DW9714A and V variant
` [PATCH v6 2/3] arm64: dts: qcom: sdm845-shift-axolotl: Add actuator for main rear camera
` [PATCH v6 3/3] arm64: dts: qcom: sdm845-shift-axolotl: Add actuator for second "
[PATCH v10 00/10] io: accel: mma8452: Allow open drain interrupt pin configuration
2026-10-16 17:33 UTC (10+ messages)
` [PATCH v10 10/10] iio: accel: mma8452: Support interrupt sharing
[PATCH 0/4] edac: qcom: add DDR DRAM ECC reporting for Shikra (QCM2390)
2026-10-16 17:26 UTC (5+ messages)
` [PATCH 2/4] soc: qcom: llcc: add LCP/SRP DDR DRAM ECC register offsets
` [PATCH 3/4] edac: qcom: add LCP/SRP DDR DRAM ECC support for Shikra
[PATCH v7 0/4] arm64: amlogic: T7 thermal support
2026-10-16 17:25 UTC (6+ messages)
` [PATCH v7 1/4] arm64: dts: amlogic: t7: Add cooling cells to all CPUs
` [PATCH v7 2/4] arm64: dts: amlogic: t7: Add thermal sensor nodes
` [PATCH v7 3/4] arm64: dts: amlogic: t7: Add thermal zones
` [PATCH v7 4/4] arm64: dts: amlogic: t7: khadas-vim4: Add fan cooling to "
[PATCH v3 0/3] Use icc-clk for the SM8250 camera NoC AXI clock
2026-10-16 17:22 UTC (4+ messages)
` [PATCH v3 2/3] clk: qcom: camcc-sm8250: use icc-clk for "
` [PATCH v3 3/3] arm64: dts: qcom: sm8250: add camcc interconnect cells
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox