messages from 2026-10-17 22:47:20 to 2026-10-18 04:55:15 UTC [more...]
[PATCH 0/2] Label the fans on Kobol Helios64
2026-10-18 4:55 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: hwmon: pwm-fan: Reference the common fan schema
` [PATCH 2/2] arm64: dts: rockchip: Label the fans on Kobol Helios64
[PATCH v2 0/4] Fix PSCI on MSM8917 and MSM8937
2026-10-18 4:29 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: arm: psci: Add skip-suspend-mode-switch property
` [PATCH v2 2/4] cpuidle: psci: Allow skipping the suspend mode switch
` [PATCH v2 3/4] arm64: dts: qcom: Skip suspend mode switch on MSM8917 and MSM8937
` [PATCH v2 4/4] arm64: dts: qcom: msm8917: Use a shallower cluster state to fix unresponsive idle
[PATCH v2 0/2] regulator: support the HiSilicon STB PMOC voltage rails
2026-10-18 4:15 UTC (5+ messages)
` [PATCH v2 1/2] regulator: dt-bindings: add hi3798cv200 regulator
[PATCH 0/6] iio: adc: ltc2497: add LTC2493 support and line-frequency rejection
2026-10-18 3:30 UTC (12+ messages)
` [PATCH 2/6] iio: adc: ltc2497: add LTC2493 support
` [PATCH 5/6] iio: adc: ltc2497: add FA/FB line-frequency rejection selection
` [PATCH 6/6] iio: adc: ltc2497: enable line-frequency rejection on LTC2493
[PATCH v6 0/6] Add support for InvenSense ICM-42370-P accelerometer
2026-10-18 3:01 UTC (14+ messages)
` [PATCH v6 1/6] dt-bindings: iio: imu: icm42600: Add ICM-42670-P
` [PATCH v6 5/6] iio: imu: inv_icm42607: Implement MREGx register access
` [PATCH v6 6/6] iio: imu: inv_icm42607: Add accelerometer calibbias support
[PATCH v5 0/6] Add support for InvenSense ICM-42370-P accelerometer
2026-10-18 2:33 UTC (4+ messages)
` [PATCH v5 4/6] iio: imu: inv_icm42607: Add support for ICM-42370-P
[PATCH v2 0/8] Add ADC driver support for RZ/V2H(P) and RZ/V2N SoCs
2026-10-18 2:26 UTC (2+ messages)
[PATCH net-next v26 0/3] net: phy: Add driver for Motorcomm Quad 2.5GbE phy
2026-10-18 2:21 UTC (4+ messages)
` [PATCH net-next v26 1/3] dt-bindings: net: Document Motorcomm YT8824 PHY package
` [PATCH net-next v26 2/3] net: phy: Add support for Template Control register for PMA
` [PATCH net-next v26 3/3] net: phy: Add driver for Motorcomm Quad 2.5GbE phy
[PATCH 0/8] Add ADC support for RZ/V2H(P) and RZ/V2N SoCs
2026-10-18 2:10 UTC (5+ messages)
` [PATCH 8/8] iio: adc: rzt2h: Add support for RZ/V2H(P) SoC
[PATCH] powerpc: dts: turris1x.dts: Describe switch PHYs on the MDIO bus
2026-10-18 1:53 UTC
[PATCH v5 00/10] iio: adc: Add TI ADS126X ADC family support
2026-10-18 1:31 UTC (2+ messages)
[PATCH v11 0/8] iio: add Open Sensor Fusion UART support
2026-10-18 0:02 UTC (4+ messages)
` [PATCH v11 7/8] iio: osf: add core KUnit tests
[PATCH 0/4] iio: adc: ade9000: add support for ADE9039
2026-10-17 23:44 UTC (8+ messages)
` [PATCH 2/4] dt-bindings: iio: adc: adi,ade9000: add adi,ade9039 compatible
` [PATCH 3/4] iio: adc: ade9000: add support for ADE9039
` [PATCH 4/4] docs: iio: ade9000: document ADE9039 support
[PATCH v6 0/2] Add support for AS7343 multi-spectral sensor
2026-10-17 23:23 UTC (2+ messages)
[PATCH 0/3] phy: core, qcom-mipi-csi2: add generic MIPI C-PHY support
2026-10-17 23:19 UTC (5+ messages)
` [PATCH 1/3] phy: core: add generic MIPI C-PHY configuration API
` [PATCH 2/3] phy: qcom-mipi-csi2: Add sa8775p C-PHY support
[PATCH v3 0/3] iio: adc: add support for the MAX34417 Four-Channel High Dynamic Range Power Accumulator
2026-10-17 22:47 UTC (3+ messages)
` [PATCH v3 3/3] iio: adc: add driver "
[PATCH net-next v8 0/7] net: pse-pd: decouple controller lookup from MDIO probe
2026-10-17 22:47 UTC (2+ messages)
[PATCH net-next v8 7/7] net: phy: own phydev->psec via PSE notifier and remove fwnode_mdio hook
2026-10-17 22:47 UTC (2+ messages)
[PATCH net-next v8 6/7] of: property: do not let "pses" block a consumer's probe
2026-10-17 22:47 UTC (2+ messages)
[PATCH net-next v8 5/7] net: pse-pd: check the PI vpwr supply before registering the controller
2026-10-17 22:47 UTC (2+ messages)
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox