messages from 2026-10-29 07:31:27 to 2026-10-29 13:25:12 UTC [more...]
[PATCH v2 0/4] mmc: sdhci-cadence: SD6HC DDR50/DDR52 read-path tuning and fixes
2026-10-29 13:25 UTC (3+ messages)
` [PATCH v2 4/4] mmc: sdhci-cadence6: read SD6HC DDR50 tuning from device tree
[PATCH 0/9] arm64: renesas: r8a78000: Add PWM support
2026-10-29 13:11 UTC (10+ messages)
` [PATCH/RFC 1/9] dt-bindings: can: renesas,rcar-canfd: Document R-Car X5H support
` [PATCH 2/9] can: rcar_canfd: Add Runtime PM support
` [PATCH 3/9] can: rcar_canfd: Make clkp local
` [PATCH 4/9] can: rcar_canfd: Add support for R-Car Gen5
` [PATCH 5/9] dt-bindings: clock: renesas,r8a78000-cpg: Add CAN-FD clock
` [PATCH/RFC 6/9] arm64: dts: renesas: r8a78000: Add CAN-FD nodes
` [PATCH/DNI 7/9] clk: renesas: r8a78000: Add CAN-FD clocks
` [PATCH/DNI 8/9] pmdomain: renesas: r8a78000: Add CAN-FD support
` [PATCH/DNI 9/9] arm64: dts: renesas: ironhide: Enable CAN-FD
[RFC PATCH v2 0/4] RISC-V Sspesa: Linux perf precise sample attribution
2026-10-29 13:09 UTC (5+ messages)
` [RFC PATCH v2 1/4] dt-bindings: riscv: Add Sspesa and Ssplcofi extensions
` [RFC PATCH v2 2/4] riscv: Add detection for "
` [RFC PATCH v2 3/4] riscv: Add perf_arch_misc_flags callback
` [RFC PATCH v2 4/4] perf/riscv: Use Sspesa for precise sample attribution
[PATCH v4 0/3] iio: adc: add support for the MAX34417 Four-Channel High Dynamic Range Power Accumulator
2026-10-29 13:04 UTC (7+ messages)
` [PATCH v4 3/3] iio: adc: add driver "
[PATCH v1 0/8] Add ADC, eMMC and VGA pinctrl for StarFive JHB100 SoC
2026-10-29 13:00 UTC (3+ messages)
` [PATCH v1 6/8] pinctrl: starfive: Add StarFive JHB100 emmc controller driver
[PATCH v2 0/4] Add TI LM51772 buck-boost voltage regulator
2026-10-29 12:42 UTC (5+ messages)
` [PATCH v2 1/4] regulator: dt-bindings: Add TI LM51772 support
[PATCH v2 0/3] drm/msm/mdss: reset all MDSS block resets described in DT
2026-10-29 12:32 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: display: msm: mdss-common: describe additional block resets
` [PATCH v2 2/3] drm/msm/mdss: reset all block resets described in DT
` [PATCH v2 3/3] arm64: dts: qcom: sm8750: describe all MDSS block resets
[PATCH v1 0/2] ASoC: codecs: nau8310: Add NAU83G10 amplifier
2026-10-29 12:31 UTC (5+ messages)
` [PATCH v1 2/2] ASoC: codecs: nau8310: Add support for "
[PATCH v8 0/9] Add Renesas RZ/G3E GPT support
2026-10-29 12:15 UTC (3+ messages)
[PATCH 0/2] ARM: dts: aspeed: Add NVIDIA MGX Vera C2 BMC support
2026-10-29 12:12 UTC (8+ messages)
` [PATCH 1/2] dt-bindings: arm: aspeed: Add NVIDIA MGX Vera C2 BMC
` [PATCH 2/2] ARM: dts: "
[PATCH v4 0/6] arm-mpam: Add basic device tree support for resctrl
2026-10-29 12:02 UTC (4+ messages)
` [PATCH v4 2/6] arm_mpam: Fix MSC MMIO window size off-by-one with resource_size()
[PATCH v2 0/3] arm64: dts: qcom: Add Microsoft Surface Laptop 8th Edition
2026-10-29 11:57 UTC (4+ messages)
` [PATCH v2 3/3] "
[PATCH v2] powerpc: dts: Add support for WatchGuard Firebox T30
2026-10-29 11:44 UTC (3+ messages)
[PATCH v7 0/2] Add support for AS7343 multi-spectral sensor
2026-10-29 11:20 UTC (5+ messages)
` [PATCH v7 1/2] dt-bindings: iio: light: add as7343
` [PATCH v7 2/2] iio: light: add AS7343 multi-spectral sensor driver
[PATCH v2 00/12] clk: qcom: Add PDM GP_MN fractional clock divider driver and DT support
2026-10-29 10:57 UTC (6+ messages)
` [PATCH v2 01/12] dt-bindings: clock: qcom: Add bindings for PDM GP_MN clock divider
` [PATCH v2 08/12] pinctrl: qcom: qcs615: Add gp_mn mux function
[PATCH v2 0/2] Add devicetree bindings for spi-virtio
2026-10-29 10:55 UTC (12+ messages)
` [PATCH v2 1/2] dt-bindings: spi: add spi-virtio
` [PATCH v2 2/2] MAINTAINERS: add Francesco as spi-virtio reviewer
[PATCH v5 0/2] Add ITE IT6162 MIPI DSI to HDMI bridge driver
2026-10-29 10:46 UTC (4+ messages)
` [PATCH v5 1/2] dt-bindings: display: bridge: Add ITE IT6162 MIPI DSI to HDMI bridge
` [PATCH v5 2/2] drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver
[PATCH v4 0/4] arm64: dts: qcom: Add support for Radxa Dragon Q8B
2026-10-29 10:44 UTC (7+ messages)
` [PATCH v4 1/4] arm64: dts: qcom: sc8280xp: enable PCIe ECAM and 64-bit memory
` [PATCH v4 2/4] dt-bindings: arm: qcom: document Radxa Dragon Q8B
` [PATCH v4 3/4] arm64: dts: qcom: sc8280xp: add "
` [PATCH v4 4/4] firmware: qcom: scm: Allow QSEECOM for "
[PATCH 0/8] drm/panel: novatek-nt36672e: Add SM8450 HDK display card
2026-10-29 10:30 UTC (8+ messages)
` [PATCH 1/8] dt-bindings: display: panel: novatek,nt36672e: Document the reset GPIO polarity
[PATCH v4 00/14] drm/tidss: Add BeagleY-AI display support (and some more)
2026-10-29 10:28 UTC (16+ messages)
` [PATCH v4 01/14] dt-bindings: display: ti,am65x-dss: Add AM62P DSS
` [PATCH v4 02/14] drm/tidss: Add helper to identify the AM65x OLDI video port
` [PATCH v4 03/14] drm/tidss: Stop using vp_bus_type for directly connected panels
` [PATCH v4 04/14] drm/tidss: Drop the tied off video port check from mode validation
` [PATCH v4 05/14] drm/tidss: Remove the unused vp_bus_type feat
` [PATCH v4 06/14] drm/tidss: oldi: Drop unnecessary forward declaration
` [PATCH v4 07/14] drm/tidss: oldi: Fix wrong return value from tidss_oldi_mode_valid()
` [PATCH v4 08/14] drm/tidss: oldi: Fix serial clock reference leak
` [PATCH v4 09/14] drm/tidss: oldi: Fix cleanup on a failed init
` [PATCH v4 10/14] drm/tidss: oldi: Move the setup of one OLDI TX to its own function
` [PATCH v4 11/14] drm/tidss: oldi: Add power domain support
` [PATCH v4 12/14] drm/tidss: Add support for AM62P display subsystem
` [PATCH v4 13/14] arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS
` [PATCH v4 14/14] arm64: dts: ti: beagley-ai: Enable HDMI display and audio
[PATCH v27 00/10] Implement PSCI reboot mode driver for PSCI resets
2026-10-29 10:24 UTC (17+ messages)
` [PATCH v27 01/10] power: reset: reboot-mode: Support up to 3 magic values per mode
` [PATCH v27 02/10] power: reset: reboot-mode: Add support for predefined reboot modes
` [PATCH v27 03/10] firmware: psci: Introduce command-based resets
` [PATCH v27 04/10] firmware: psci: Add support for PSCI auxiliary devices
` [PATCH v27 05/10] dt-bindings: arm: Document reboot mode magic
` [PATCH v27 06/10] power: reset: Add psci-reboot-mode driver
` [PATCH v27 07/10] arm64: dts: qcom: Add psci reboot-modes for kodiak boards
` [PATCH v27 08/10] arm64: dts: qcom: Add psci reboot-modes for lemans boards
` [PATCH v27 09/10] arm64: dts: qcom: Add psci reboot-modes for monaco boards
` [PATCH v27 10/10] arm64: dts: qcom: Add psci reboot-modes for talos boards
[PATCH v10 0/6] rtc: s35390a: Allow use of output pin for interrupt signal 1 for wakealarm
2026-10-29 10:23 UTC (2+ messages)
[PATCH 0/4] Suspend-to-RAM fixes for RK3588 + SPI-connected RK806 PMIC, enable PMIC sleep on RK3588 Tiger
2026-10-29 10:21 UTC (6+ messages)
` [PATCH 1/4] Input: rk805-pwrkey - enable the wakeup interrupt during system suspend
` [PATCH 2/4] mfd: rk8xx-core: keep the PMIC interrupt disabled "
` [PATCH 3/4] mfd: rk8xx-spi: add system sleep PM ops
` [PATCH 4/4] arm64: dts: rockchip: put the PMIC into sleep mode in suspend on RK3588 Tiger
[PATCH v3 0/4] arm64: dts: qcom: Add support for Radxa Dragon Q8B
2026-10-29 9:58 UTC (7+ messages)
` [PATCH v3 1/4] arm64: dts: qcom: sc8280xp: enable PCIe ECAM and 64-bit memory
` [PATCH v3 2/4] dt-bindings: arm: qcom: document Radxa Dragon Q8B
` [PATCH v3 3/4] arm64: dts: qcom: sc8280xp: add "
` [PATCH v3 4/4] firmware: qcom: scm: Allow QSEECOM for "
[PATCH v3 0/3] Use icc-clk for the SM8250 camera NoC AXI clock
2026-10-29 9:57 UTC (16+ messages)
` [PATCH v3 1/3] dt-bindings: clock: qcom,camcc-sm8250: add interconnect provider
` [PATCH v3 3/3] arm64: dts: qcom: sm8250: add camcc interconnect cells
[PATCH RFC RFT v2 0/3] clk: meson: Refactor PLL pre-divider as a divider clock
2026-10-29 9:57 UTC (6+ messages)
` [PATCH RFC RFT v2 1/3] dt-bindings: clock: amlogic: Add PLL pre-divider clock IDs
` [PATCH RFC RFT v2 2/3] clk: divider: add CLK_DIVIDER_INVALID_ZERO flag
` [PATCH RFC RFT v2 3/3] clk: meson: pll: Remove the dedicated n parameter
[PATCH 0/3] i3c: renesas: Add support for the analog noise filter
2026-10-29 9:54 UTC (10+ messages)
` [PATCH 1/3] dt-bindings: i3c: renesas,i3c: Document analog noise filter control
[PATCH RFC 00/18] riscv: add initial Zhihe A210 support using SCMI clocks and resets
2026-10-29 9:53 UTC (3+ messages)
` [PATCH RFC 07/18] pinctrl: zhihe: add A210 support
[PATCH 0/2] iio: adc: add LTC2387 and ADAQ2387x support
2026-10-29 9:47 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: iio: adc: add lltc,ltc2387
[PATCH v6] powerpc/dts: Add Device Tree for WatchGuard Firebox T30 (v6)
2026-10-29 9:41 UTC (3+ messages)
[PATCH 0/3] Commonize Glymur regulator settings for fixed rails
2026-10-29 9:39 UTC (8+ messages)
` [PATCH 1/3] arm64: dts: qcom: Unify Glymur/Mahua regulator handles
` [PATCH 2/3] arm64: dts: qcom: Consolidate Glymur CoB power grid
` [PATCH 3/3] arm64: dts: qcom: glymur-crd: Drop L4F0
` [PATCH v1 0/3] Commonize Glymur regulator settings for fixed rails
[PATCH] arm64: dts: turris-mox: replace denx.de links with official location
2026-10-29 9:38 UTC
[PATCH 00/10] Initial Apple Silicon M5 device trees and dt-bindings
2026-10-29 9:37 UTC (3+ messages)
` [PATCH 02/10] dt-bindings: interrupt-controller: apple,aic2: Add t8142 compatible
[PATCH 0/9] media: camss: add SM8750 support
2026-10-29 9:37 UTC (10+ messages)
` [PATCH 2/9] media: camss: csiphy: add CSIPHY 2.4.0 lane settings for SM8750
` [PATCH 4/9] media: camss: csid: add the 980 generation
` [PATCH 8/9] media: camss: vfe: add the gen4 block and SM8750 camera subsystem
` [PATCH 9/9] arm64: dts: qcom: sm8750: add the "
[PATCH 0/5] Fix Incorrect State of Charge for RK817
2026-10-29 9:37 UTC (5+ messages)
` [PATCH 3/5] power: supply: rk817-charger: Correct the gauge across system sleep
` [PATCH 4/5] dt-bindings: power: supply: rk817-charger: Add rockchip,gate-function-disable
[PATCH] ASoC: dt-bindings: an7581-afe: add support for reset and secondary IRQ conf
2026-10-29 9:32 UTC (2+ messages)
[PATCH v7 00/15] drm/imx: dc: Use prefetch engine
2026-10-29 9:31 UTC (11+ messages)
` [PATCH v7 03/15] drm/imx: dc-plane: Disable plane when it is invisible
` [PATCH v7 05/15] drm/imx: dc: Flag CRTC status in GERNERALPURPOSE register
` [PATCH v7 06/15] drm/imx: dc-crtc: Disable at boot
` [PATCH v7 07/15] drm/imx: dc: Add PRG support
` [PATCH v7 08/15] drm/imx: dc: Add DPR channel support
[PATCH RFC v2 0/5] arm64: dts: qcom: Add audio support for Nord platform
2026-10-29 9:13 UTC (4+ messages)
` [PATCH RFC v2 1/5] soc: qcom: pd-mapper: Add support for Nord
[PATCH v2 00/10] fdtfactor: Introduce fdtfactor to auto-factor overlays
2026-10-29 8:38 UTC (3+ messages)
` [PATCH v2 02/10] pylibfdt: Add subnode/property iterators and get_mem_rsv_list()
[PATCH 0/3] platform: arm64: qcom-hamoa-ec: Add thermistor support
2026-10-29 9:08 UTC (4+ messages)
` [PATCH 3/3] arm64: dts: qcom: glymur: Add EC thermal zones
[PATCH 00/11] arm64: renesas: r8a78000: Add PWM support
2026-10-29 9:08 UTC (6+ messages)
` [PATCH 07/11] dt-bindings: clock: renesas,r8a78000-cpg: Add PWM clocks
[PATCH v3] arm64: dts: qcom: sc8280xp: add missing QUP pinctrl states
2026-10-29 8:57 UTC (2+ messages)
[PATCH v2 0/4] Add Tegra238 BPMP support and fix stale EMC clock rate
2026-10-29 8:56 UTC (3+ messages)
` [PATCH v2 1/4] dt-bindings: firmware: tegra186-bpmp: Add Tegra238 BPMP
[PATCH v2] regulator: dt-bindings: willsemi,wl2868c: add the WL2868C camera PMIC
2026-10-29 8:55 UTC (2+ messages)
[PATCH RFC v3 0/3] arm64: dts: qcom: nord: Add display support
2026-10-29 8:55 UTC (7+ messages)
` [PATCH RFC v3 1/3] arm64: dts: qcom: nord: Add display subsystem nodes
` [PATCH RFC v3 2/3] arm64: dts: qcom: nord-ride-embedded: Enable eDP0-3 display output
` [PATCH RFC v3 3/3] arm64: dts: qcom: nord-rrd: Enable eDP0/1 "
[PATCH v1] arm64: dts: qcom: eliza-evk: Fix M.2 W_DISABLE2# GPIO polarity
2026-10-29 8:54 UTC (4+ messages)
[PATCH v3 0/2] i2c: Add driver support Amlogic A9 I2C
2026-10-29 8:48 UTC (4+ messages)
` [PATCH v3 1/2] dt-bindings: i2c: add Amlogic A9 I2C controller
` [PATCH v3 2/2] i2c: amlogic: Add Amlogic A9 I2C controller driver
[PATCH] dt-bindings: leds: ti,lm36922: Correct filename to match convention
2026-10-29 8:38 UTC
[PATCH] dt-bindings: Fix property name typos in if/then schemas
2026-10-29 8:37 UTC (2+ messages)
[PATCH v6 0/2] Add bindings and driver for Sony IMX908
2026-10-29 8:33 UTC (3+ messages)
` [PATCH v6 2/2] media: i2c: Add Sony IMX908 image sensor driver
[PATCH v2 0/2] arm64: dts: rockchip: Add ArmSoM Sige7s support
2026-10-29 8:25 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add ArmSoM Sige7s
` [PATCH v2 2/2] arm64: dts: rockchip: Add ArmSoM Sige7s board
[RFC PATCH 00/23] ASoC: qcom: AudioReach Active speaker protection for WSA884x
2026-10-29 8:17 UTC (5+ messages)
` [RFC PATCH 22/23] arm64: dts: qcom: glymur-crd: add WSA speaker protection VI feedback
[PATCH v3 0/6] Fix SATA support for NSP SoCs
2026-10-29 8:10 UTC (4+ messages)
` [PATCH v3 2/6] dt-bindings: ata: sata-brcm: Describe the NSP IDM registers
[PATCH v2 0/3] AW86224 haptic driver
2026-10-29 8:06 UTC (3+ messages)
` [PATCH v2 3/3] arm64: dts: qcom: sm7325-motorola-dubai: Add vibrator support
[PATCH v4 3/7] dt-bindings: usb: Add qcom,sa8255p-dwc3 for firmware-managed resources
2026-10-29 8:02 UTC (2+ messages)
[PATCH] arm64: dts: qcom: hamoa: Add EL2 overlay for hamoa-advantech-som-db5830
2026-10-29 7:55 UTC
[PATCH v6 00/18] drm: starfive: jh7110: Enable display subsystem
2026-10-29 7:53 UTC (19+ messages)
` [PATCH v6 01/18] drm/bridge: inno-hdmi: fix swapped HSYNC and VSYNC polarity
` [PATCH v6 02/18] drm/bridge: inno-hdmi: Don't dereference a NULL drm_device on hotplug
` [PATCH v6 03/18] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller
` [PATCH v6 04/18] dt-bindings: soc: starfive: Add starfive,jh7110-hdmi-subsystem
` [PATCH v6 05/18] dt-bindings: soc: starfive: Add starfive,jh7110-vout-syscon
` [PATCH v6 06/18] dt-bindings: display: verisilicon: Add starfive,jh7110-dc8200
` [PATCH v6 07/18] dt-bindings: soc: starfive: Add starfive,jh7110-vout-subsystem
` [PATCH v6 08/18] drm/bridge: inno-hdmi: Split probe out of bind
` [PATCH v6 09/18] drm/bridge: inno-hdmi: Allow the register map to come from a parent
` [PATCH v6 10/18] drm/bridge: inno-hdmi: Add .disable platform operation
` [PATCH v6 11/18] drm/bridge: inno-hdmi: Add .mode_valid "
` [PATCH v6 12/18] drm/bridge: inno-hdmi: Make the PHY configuration table optional
` [PATCH v6 13/18] drm/bridge: inno-hdmi: Make the register clock source selectable
` [PATCH v6 14/18] soc: starfive: Add jh7110-hdmi-subsystem driver
` [PATCH v6 15/18] soc: starfive: Add jh7110-vout-subsystem driver
` [PATCH v6 16/18] drm/bridge: starfive: Add JH7110 HDMI controller driver
` [PATCH v6 17/18] riscv: dts: starfive: jh7110: Update DT for display subsystem
` [PATCH v6 18/18] MAINTAINERS: Add StarFive JH7110 display subsystem entry
[PATCH] arm64: dts: aspeed: ast2700-evb: Reserve coprocessor, IPC and VBIOS memory
2026-10-29 7:51 UTC
[PATCH 0/4] Enable DSP device for i.MX8ULP
2026-10-29 7:48 UTC (5+ messages)
` [PATCH 3/4] arm64: dts: imx8ulp: add HiFi4 DSP node
` [PATCH 4/4] arm64: dts: imx8ulp-evk: enable HiFi4 DSP device
[PATCH 0/4] loongson2-apb-cmc-dma: Fixes issues and pause/resume support
2026-10-29 7:41 UTC (4+ messages)
` [PATCH 3/4] dmaengine: loongson: loongson2-apb-cmc-dma: Program CNDTR when advancing sg
[PATCH v3 0/2] Add LT8491 driver
2026-10-29 7:38 UTC (3+ messages)
` [PATCH v3 2/2] power: supply: add LT8491 battery charger driver
[PATCH 0/4] irqchip: add EyeQ5 PCIe MSI controller
2026-10-29 7:36 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: interrupt-controller: add Mobileye "
` [PATCH 3/4] MIPS: dts: eyeq5: add MSI controllers
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox